Advantech PAC-4010 User manual

__________________________________________________________________________________________
PAC
-4010 User Manual V1.0 Copyright 2016 Advantech Co. Ltd. All rights reserved. Page I

__________________________________________________________________________________________
PAC-4010 User Manual V1.0 Copyright 2016 Advantech Co. Ltd. All rights reserved. Page 1
Revision History
Date(mm/dd/yyyy) Revision Modifications
06/28/2016 0.1 Initial draft version
07/28/2016 0.2 Initial draft version
08/22/2016 0.3 Initial draft version
10/26/2016 0.4 Initial draft version
11/18/2016 0.5 Initial draft version
12/20/2016 1.0 First release version

__________________________________________________________________________________________
PAC-4010 User Manual V1.0 Copyright 2016 Advantech Co. Ltd. All rights reserved. Page 2
Copyright and Trademarks
The documentation and the software included with this product are copyrighted 2016
by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right to
make improvements in the products described in this manual at any time without notice.
No part of this manual may be reproduced, copied, translated or transmitted in any
form or by any means without the prior written permission of Advantech Co., Ltd.
Information provided in this manual is intended to be accurate and reliable. How-ever,
Advantech Co., Ltd. assumes no responsibility for its use, nor for any infringe-ments of
the rights of third parties, which may result from its use.
Declaration of Conformity
CE
This product has passed the CE test for environmental specifications.
FCC Class A
This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference
in which case the user will be required to correct the interference at his own expense.
Acknowledgements
Intel and Pentium are trademarks of Intel Corporation.
Microsoft Windows and MS-DOS are registered trademarks of Microsoft Corp. All
other product names or trademarks are properties of their respective owners.
Technical Support and Assistance
1. Visit the Advantech website at http://support.advantech.com where you can find the
latest information about the product.
2. Contact your distributor, sales representative, or Advantech's customer service
center for technical support if you need additional assistance. Please have the
following information ready before you call:
- Product name and serial number
- Description of your peripheral attachments
- Description of your software (operating system, version, application software,
etc.)
- A complete description of the problem
- The exact wording of any error messages

__________________________________________________________________________________________
PAC-4010 User Manual V1.0 Copyright 2016 Advantech Co. Ltd. All rights reserved. Page 3
Product Warranty (2 Years)
Advantech warrants to you, the original purchaser, that each of its products will be free
from defects in materials and workmanship for two years from the date of purchase.
This warranty does not apply to any products which have been repaired or altered by
persons other than repair personnel authorized by Advantech, or which have been
subject to misuse, abuse, accident or improper installation. Advantech assumes no
liability under the terms of this warranty as a consequence of such events.
Because of Advantech’s high quality -control standards and rigorous testing, most of
our customers never need to use our repair service. If an Advantech product is
defective, it will be repaired or replaced at no charge during the warranty period. For
out-of-warranty repairs, you will be billed according to the cost of replacement materials,
service time and freight. Please consult your dealer for more details.
If you think you have a defective product, follow these steps:
1. Collect all the information about the problem encountered. (For example, CPU
speed, Advantech products are used, other hardware and software are used, etc.)
Note!
Anything abnormal and list any onscreen messages you get when the problem
occurs.
2. Call your dealer and describe the problem. Please have your manual, product, and
any helpful information readily available.
3. If your product is diagnosed as defective, obtain an RMA (return merchandize
authorization) number from your dealer. This allows us to process your return
more quickly.
4. Carefully pack the defective product, a fully-completed Repair and Replacement
Order Card and a photocopy proof of purchase date (such as your sales receipt) in
a shippable container. A product returned without proof of the purchase date is not
eligible for warranty service.
5. Write the RMA number visibly on the outside of the package and ship it prepaid to
your dealer.
Warnings, Cautions and Notes
Warning!
Warnings indicate conditions, which if not observed, can cause
personal injury!
Caution!
Cautions are included to help you avoid damaging hardware or losing
data.
Note!
Notes provide additional information.

__________________________________________________________________________________________
PAC-4010 User Manual V1.0 Copyright 2016 Advantech Co. Ltd. All rights reserved. Page 4
Safety Instructions
1. Read these safety instructions carefully.
2. Keep this User Manual for later reference.
3. Keep this equipment away from humidity.
4. Put this equipment on a reliable surface during installation. Dropping it or letting it
fall may cause damage.
5. Make sure the voltage of the power source is correct before connecting the
equipment to the power outlet.
6. All cautions and warnings on the equipment should be noted.
7. If the equipment is not used for a long time, disconnect it from the power source to
avoid damage by transient over-voltage.
8. Never pour any liquid into an opening. This may cause fire or electrical shock.
9. Never open the equipment. For safety reasons, the equipment should be opened
only by qualified service personnel.
10. If one of the following situations arises, get the equipment checked by service
personnel:
- The power cord or plug is damaged.
- Liquid has penetrated into the equipment.
- The equipment has been exposed to moisture.
- The equipment does not work well, or you cannot get it to work according
- The equipment has been dropped and damaged.
- The equipment has obvious signs of breakage.
11. The sound pressure level at the operator’s position according to IEC 704-1:1982 is
no more than 70 dB (A).
12. Be Aware of the sharp edges of the connector of cables and the chassis when
operating.
DISCLAIMER: This set of instructions is given according to IEC 704-1. Advantech
disclaims all responsibility for the accuracy of any statements contained herein.
Safety Precaution – Static Electricity
Follow these simple precautions to protect yourself from harm and the products from
damage.
1. To avoid electrical shock, always disconnect the power from your system chassis
before you work on it. Don’t touch any components on the CPU card or other cards
while the system is on.
2. Disconnect power before making any configuration changes. The sudden rush of
power as you connect a jumper or install a card may damage sensitive electronic
components.
3. When unpacking a static-sensitive component from its shipping carton, do not
remove the component's antistatic packing material until you are ready to install the
component in a computer. Just before unwrapping the antistatic packaging, be sure
you are at an ESD workstation, or grounded with an ESD strap. This will discharge
any static electricity that may have built up in your body.
4. When transporting a sensitive component, first place it in an antistatic container or
packaging.

PAC-4010 Manual V01 20161118 Copyright 2016 Advantech Co. Ltd. All rights reserved. Page 5
TABLE OF CONTENTS
Chapter 1 Introduction .....................................................13
1.1 Features ...............................................................................................................15
1.2 Specifications........................................................................................................15
1.3 Packing List..........................................................................................................17
1.4 Ordering Information.............................................................................................18
1.5 Block Diagram ......................................................................................................19
Chapter 2 Hardware Components....................................20
2.1 PAC-4010 System Front View ..............................................................................21
2.2 PAC-4010 System Rear View...............................................................................21
2.3 CPU Blade MIC-8301 ...........................................................................................22
2.3.1 Data/Control Plane Interface .......................................................................22
2.3.2 Ethernet Management.................................................................................22
2.4 PHY Mezzanine Module (PMM)............................................................................23
2.4.1 PMM-4100/PMM-4103 (single port 100GB PMM)........................................23
2.4.2 PMM-2400 (8 ports 10GB PMM) .................................................................23
2.4.3 PMM-3200 (2 ports 40GB PMM) .................................................................24
2.5 Switch and Management Board (SWM)................................................................24
2.6 PAC-4010 Front I/O Interface ...............................................................................25
2.6.1 Control Plane I/O Interface..........................................................................25
2.6.2 Data Plane I/O Interface..............................................................................25
2.6.3 Management Interface.................................................................................26
2.7 Backplane.............................................................................................................26
2.7.1 Data Backplane...........................................................................................26
2.7.2 Power Backplane.........................................................................................26
2.8 Power ...................................................................................................................26
2.8.1 Power Subsystem Specifications.................................................................26
2.8.2 AC/DC Power Supply Unit Specifications ....................................................28
2.8.3 DC/DC Power Supply Unit Specifications....................................................30
2.9 Cooling and Thermal Management.......................................................................32
2.9.1 Fan Control Board.......................................................................................32
2.9.2 Fan Module .................................................................................................33
Chapter 3 Installation.......................................................34
3.1 LED Indicators......................................................................................................35
3.1.1 PAC-4010 Status LEDs...............................................................................35
3.1.2 CPU Blade MIC-8301 LEDs ........................................................................36
3.1.3 PMM LEDs..................................................................................................37
3.1.4 FAN and PSU LEDs....................................................................................38
3.2 FRU Installation and Extraction.............................................................................39
3.2.1 CPU Blade MIC-8301 and Peripheral Installation ........................................39
3.2.1.1 Insert/Extract CPU Blade MIC-8301.................................................39
3.2.1.2 Install DDR4 Memory .......................................................................41
3.2.1.3 Install M2 SSD..................................................................................41
3.2.2 PMM Installation..........................................................................................42

__________________________________________________________________________________________
PAC-4010 User Manual V1.0 Copyright 2016 Advantech Co. Ltd. All rights reserved. Page 6
3.2.3 FAN Module Installation...............................................................................43
3.2.4 PSU Installation...........................................................................................44
3.2.5 2.5” SSD Installation....................................................................................45
3.3 Chassis Slider Rail Installation..............................................................................45
3.3.1 Rack Mounting ............................................................................................45
3.3.2 Chassis Slider Rail Installation.....................................................................47
3.4 Console Terminal Setup .......................................................................................48
3.4.1 COM1 (mini-USB)........................................................................................48
3.4.2 COM2 (RJ45)..............................................................................................49
3.4.3 Serial-over-LAN (SOL).................................................................................49
3.4.4 Terminal Emulator.......................................................................................49
3.4.5 PuTTY Configuration...................................................................................50
3.5 BIOS Setup...........................................................................................................52
3.5.1 LMP BIOS Configuration .............................................................................52
3.5.1.1 Hare Drive Boot Media.....................................................................53
3.5.1.2 Boot Priority......................................................................................53
3.5.1.3 Virtualization Technology .................................................................54
3.5.1.4 PEX Net Boot...................................................................................55
3.5.2 CPU Blade BIOS Configuration...................................................................56
3.5.2.1 Platform Setup..................................................................................56
3.5.2.2 Serial Console Configurations..........................................................57
3.5.2.3 USB Configurations..........................................................................57
3.5.2.4 Virtualization Technology .................................................................58
3.5.2.5 Server Management Setup...............................................................58
3.5.2.6 Post & Boot Setup............................................................................59
3.5.2.7 Security Setup..................................................................................59
Chapter 4 Set up Configuration........................................60
4.1 IP Connection/Configuration/Management Ethernet .............................................61
4.2 IPMC LAN Address Setting...................................................................................62
4.3 IPMB Address Naming Rule .................................................................................62
4.4 Network Topology.................................................................................................63
4.5 Port Assignment ...................................................................................................64
Chapter 5 How to Start Using PAC-4010 via LMP............72
5.1 Build Environment.................................................................................................73
5.2 Live System Configuration....................................................................................74
5.3 Source Code Structure .........................................................................................75
5.4 Build Firmware Image...........................................................................................77
5.5 Install Firmware Image to USB Stick or Hard Drive...............................................77
5.6 Syslinux Boot Menu..............................................................................................78
5.7 Installed Packages................................................................................................79
5.8 SDK Command Proxy...........................................................................................80
5.9 FRU Detect Daemon.............................................................................................81
5.10 Plug-in-and-Play Daemon for PMM Module........................................................82
5.11 Plug-in-and-Play Daemon for CP/DP Front IO Port.............................................83

__________________________________________________________________________________________
PAC-4010 User Manual V1.0 Copyright 2016 Advantech Co. Ltd. All rights reserved. Page 7
Chapter 6 Shelf Management...........................................84
6.1 Shelf Management Overview................................................................................85
6.2 Shelf Manager Access Connectivity......................................................................85
6.2.1 Serial Console.............................................................................................86
6.2.2 Network Interface ........................................................................................87
6.2.2.1 Changing the Network Configuration................................................87
6.2.2.2 Network Protocols to Access the Shelf Manager..............................87
6.2.2.2.1 RMCP/RMCP+...................................................................87
6.2.2.2.2 Secure Shell.......................................................................88
6.2.3 Payload Interface.........................................................................................89
6.3 Shelf Manager Command Line Interface...............................................................90
6.3.1 CLI Commands ...........................................................................................90
6.4 Sensors ................................................................................................................92
6.4.1 Sensor List ..................................................................................................92
6.4.1.1 Shelf Manager Sensors....................................................................92
6.4.1.2 Node Boards Sensors ......................................................................95
6.4.1.3 Chassis Sensors ..............................................................................97
6.4.2 Sensor Description....................................................................................102
6.4.2.1 Threshold Based Sensors ..............................................................102
6.4.2.2 Physical IPMB-0 Sensor................................................................. 102
6.4.2.3 Health Sensor.................................................................................102
6.4.2.4 Version Change Sensor ................................................................. 103
6.4.2.5 BMC Watchdog Sensor..................................................................103
6.4.2.6 System ACPI Power State Sensor..................................................104
6.4.2.7 Processor State Sensor..................................................................104
6.4.2.8 Payload System Reset Sensor.......................................................105
6.4.2.9 FW Progress Sensor......................................................................106
6.3.2.10 Configuration Mode Sensor..........................................................106
6.4.2.11 IPMC Power Supply Sensor ......................................................... 107
6.4.2.12 FRU Hot Swap Sensor.................................................................108
Chapter 7 SOL Proxy Usage ...........................................109
7.1 SOL Proxy Usage Overview ...............................................................................110
7.2 BMC LAN Configuration......................................................................................111
7.2.1 Manual BMC LAN Configuration................................................................111
7.2.2 Automatic BMC LAN Configuration............................................................ 113
7.3 Network ..............................................................................................................113
7.4 Configuration File................................................................................................114
7.5 Usage.................................................................................................................115
7.5.1 Check the Configuration File .....................................................................115
7.5.2 Restart the Solproxy Server.......................................................................115
7.5.3 Run Solclient.............................................................................................115
7.6 Escape Sequences & Commands.......................................................................115
7.7 From CLI.............................................................................................................115
7.8 Via SSH..............................................................................................................115
Chapter 8 SNMP..............................................................116
8.1 SNMP Overview .................................................................................................117
8.1.1 General .....................................................................................................117

__________________________________________________________________________________________
PAC-4010 User Manual V1.0 Copyright 2016 Advantech Co. Ltd. All rights reserved. Page 8
8.1.2 BMC & ShMC............................................................................................117
8.1.3 SNMP Version...........................................................................................117
8.2 SNMP Configuration...........................................................................................117
8.3 Network ..............................................................................................................117
8.4 Configure PEF....................................................................................................118
8.4.1 PEF/PET (Platform Event Filter/Trap)........................................................118
8.5 Example..............................................................................................................119
8.5.1 Net SNMP .................................................................................................119
8.5.2 SNMP Trap Configuration..........................................................................119
8.5.3 SNMP Trap Testing...................................................................................119
8.6 MIB File & SNMP Schema..................................................................................120
Chapter 9 Shelf Manager Software Upgrade .................121
9.1 HPM.1.................................................................................................................122
9.2 HPM.1 Update Capable Components.................................................................122
9.2.1 Shelf Manager...........................................................................................122
9.2.2 Node Boards .............................................................................................122
9.2.3 Bootloader Update.....................................................................................123
9.2.4 Firmware Update.......................................................................................123
9.2.5 FPGA Update............................................................................................123
9.2.6 BIOS Update.............................................................................................123
9.2.7 NVRAM Update.........................................................................................123
9.3 HPM.1 Upgrade Procedure.................................................................................124
9.3.1 Using the IPMItool.....................................................................................124
9.3.2 Retrieve Currently Installed Versions.........................................................124
9.3.3 Upgrade ....................................................................................................125
9.3.4 Activate .....................................................................................................125
Chapter 10 Troubleshooting...........................................126
Appendix A Debian Installed Packages .........................128
Appendix B Glossary ......................................................136

__________________________________________________________________________________________
PAC-4010 User Manual V1.0 Copyright 2016 Advantech Co. Ltd. All rights reserved. Page 9
LIST OF FIGURES
Figure 1-1: PAC-4010.................................................................................................14
Figure 1-2: PAC-4010 Block Diagram.........................................................................19
Figure 2-1: PAC-4010 Form Factor Front Panel View.................................................21
Figure 2-2: PAC-4010 Form Factor Rear Panel View .................................................21
Figure 2-3: CPU Blade MIC-8301...............................................................................22
Figure 2-4: PMM-4100 Front View..............................................................................23
Figure 2-5: PMM-2400 Front View..............................................................................23
Figure 2-6: PMM-3200 Front View..............................................................................24
Figure 2-7: Management and Switch Front I/O ...........................................................25
Figure 2-8: Power Backplane Block Diagram..............................................................26
Figure 2-9: System 2+2 Power Design Block Diagram................................................27
Figure 2-10: System N+1 Power Design Block Diagram.............................................27
Figure 2-11: AC/DC PSU............................................................................................29
Figure 2-12: DC/DC PSU............................................................................................31
Figure 2-13: FAN Control Board Block Diagram .........................................................32
Figure 2-14: FAN Control Board Block Diagram .........................................................33
Figure 3-1: PAC-4010 Status LEDs ............................................................................35
Figure 3-2: MIC-8301 Front Panel ..............................................................................36
Figure 3-3: PMM Front Panel......................................................................................37
Figure 3-4: PAC-4010 Rear Side ................................................................................38
Figure 3-5: (A) Alignment Pin Slides into the Receptacle (B) Latch Spring.................. 40
Figure 3-6: MIC -8301 Extraction................................................................................40
Figure 3-7: (A) Install DDR4 Memory (B) Uninstall DDR4 Memory .............................41
Figure 3-8: M.2 SSD Installation.................................................................................41
Figure 3-9: PMM Extraction........................................................................................42
Figure 3-10: System FAN Module Installation / Extraction ..........................................43
Figure 3-11: System PSU Installation / Extraction.......................................................44
Figure 3-12: LCM and 2.5” SSD Tray Extraction.........................................................45
Figure 3-13: Mounting Ear Thread Holes....................................................................45
Figure 3-14: Mounting Ear Screws Inserted but Not Fastened Yet..............................46
Figure 3-15: Chassis Slide Rail Installation.................................................................47
Figure 3-16: PAC-4010 Front Panel............................................................................48
Figure 3-17: PuTTY Configuration (A).........................................................................50
Figure 3-18: PuTTY Configuration (B).........................................................................51
Figure 3-19: MIC-8301 BIOS Setup Menu Shown on PuTTY Screen..........................51
Figure 3-20: LMP - BIOS Main Page...........................................................................52
Figure 3-21: LMP - Hard Drive Boot Medis .................................................................53
Figure 3-22: LMP - Boot Priority..................................................................................53
Figure 3-23: LMP - Virtualization Technology .............................................................54

__________________________________________________________________________________________
PAC-4010 User Manual V1.0 Copyright 2016 Advantech Co. Ltd. All rights reserved. Page 10
Figure 3-24: LMP - Intel Virtualization Technology......................................................54
Figure 3-25: LMP - PEX Net Boot...............................................................................55
Figure 3-26: LMP - CSM Support and Configure.........................................................55
Figure 3-27: CPU Blade - Setup Program Initial Snapshot..........................................56
Figure 3-28: CPU Blade - Platform Features Setup Snapshot ....................................56
Figure 3-29: CPU Blade - Serial Console Configurations............................................57
Figure 3-30: CPU Blade - USB Configurations............................................................57
Figure 3-31: CPU Blade - Virtualization Configurations...............................................58
Figure 3-32: CPU Blade – Server Management Setup Snapshot................................58
Figure 3-33: CPU Blade – Post & Boot Configurations ...............................................59
Figure 3-34: CPU Blade – Security Configurations .....................................................59
Figure 4-1: System Block Diagram .............................................................................61
Figure 4-2: An Example of Ethernet Block Diagram....................................................62
Figure 4-3: Switch Complex and PMMs / CPU Interconnection Bandwidths ...............63
Figure 4-4: Packetarium-XLe Network Fabric .............................................................64
Figure 4-5: Physical Port Location of PMMs ...............................................................67
Figure 4-6: Physical I/O Port Location of Front Panel .................................................70
Figure 5-1: PAC-4010 LMP Boot Menu.......................................................................78
Figure 6-1: Shelf Manager Console / IPMI Interface Block Diagram............................85
Figure 6-2: Shelf Manager Management LAN Block Diagram.....................................86
Figure 7-1: SOL-Proxy Architecture..........................................................................110
Figure 9-1: NVRAM HPM.1 Upgrade........................................................................123

__________________________________________________________________________________________
PAC-4010 User Manual V1.0 Copyright 2016 Advantech Co. Ltd. All rights reserved. Page 11
LIST OF TABLES
Table 1-1: PAC-4010 System Specifications...............................................................15
Table 1-2: PAC-4010 Ordering Information.................................................................18
Table 1-3: Related Products List.................................................................................18
Table 1-4: PAC-4010 Chassis FRU List......................................................................18
Table 2-1: AC Input Voltage Range ............................................................................28
Table 2-2: AC/DC Power Supply Unit LED Indicator States........................................28
Table 2-3: DC Input Voltage Range............................................................................30
Table 2-4: DC/DC Power Supply Unit LED Indicator States........................................30
Table 3-1: PAC-4010 Front Panel LED Definition .......................................................35
Table 3-2: Blade MIC-8301 Front Panel LED Definition..............................................36
Table 3-3: PMM Front Panel LED Definition ...............................................................37
Table 3-4: PAC-4010 Rear Side LED Definition..........................................................38
Table 3-5: SW1 Jumper Setting..................................................................................39
Table 3-6: LMP BIOS Boot Screenshot.......................................................................52
Table 5-1: Add Backports Repositories.......................................................................73
Table 5-2: Live Project Version...................................................................................73
Table 5-3: Live System Configuration.........................................................................74
Table 5-4: Live System Package List..........................................................................74
Table 5-5: Source Code Structure ..............................................................................75
Table 5-6: Generate LMP Firmware Image from Scratch............................................77
Table 5-7: Re-build Specific Package and Generate New LMP Firmware Image........ 77
Table 5-8: Configure Linux Kernel Parameters ...........................................................77
Table 5-9: Install Firmware Image to USB Stick or Hard Drive....................................77
Table 5-10: Installed Packages...................................................................................79
Table 5-11: BCMSH Help Message............................................................................80
Table 5-12: FRU Detect Database..............................................................................82
Table 5-13: PMM GPIOs in tmpts ...............................................................................83
Table 6-1: Serial Console Parameters........................................................................86
Table 6-2: Shelf Manager Network Interfaces Names and Mapping ...........................87
Table 6-3: Supported Cipher Suites............................................................................88
Table 6-4: Default RMCP with User Levels and Credentials .......................................88
Table 6-5: Linux Users................................................................................................88
Table 6-6: KCS Port....................................................................................................89
Table 6-7: ShMC Sensor List......................................................................................92
Table 6-8: IPMC Sensor List.......................................................................................95
Table 6-9: Chassis Sensor List...................................................................................97
Table 6-10: Health Sensor Event Data Format .........................................................102
Table 6-11: Health Sensor Supported Events...........................................................102
Table 6-12: Version Change Sensor Event Data Format ..........................................103

__________________________________________________________________________________________
PAC-4010 User Manual V1.0 Copyright 2016 Advantech Co. Ltd. All rights reserved. Page 12
Table 6-13: Version Change Sensor Supported Events............................................103
Table 6-14: Version Change Sensor Event Data Byte 2............................................103
Table 6-15: Processor Sensor Event Data Format.................................................... 104
Table 6-16: Processor Sensor Supported Events ..................................................... 104
Table 6-17: Processor Sensor Event Data Format.................................................... 104
Table 6-18: Processor Sensor Supported Events ..................................................... 105
Table 6-19: Reset Sensor Event Data Format ..........................................................105
Table 6-20: Reset Sensor Supported Events............................................................106
Table 6-21: Reset Sensor Event Data Byte 2............................................................106
Table 6-22: Configuration Mode Sensor Event Data Format.....................................107
Table 6-23: IPMC Power Good Sensor Event Data Format ...................................... 107
Table 6-24: IPMC Power Good Sensor Supported Events........................................107
Table 6-25: FRU Hot Swap Sensor Event Data Format............................................ 108
Table 6-26: FRU Hot Swap Sensor Supported Events.............................................. 108
Table 7-1: Configure Each BMC’s IP Address ..........................................................111
Table 9-1: Supported HPM.1 Components of Shelf Manager ...................................122
Table 9-2: Supported HPM.1 Components of Node Boards...................................... 122
Table A: Debian Installed Package...........................................................................129

PAC-4010 Manual V01 20161118 Copyright 2016 Advantech Co. Ltd. All rights reserved. Page 13
Chapter 1
Introduction

__________________________________________________________________________________________
PAC-4010 User Manual V1.0 Copyright 2016 Advantech Co. Ltd. All rights reserved. Page 14
Advantech’s Packetarium XLe series meets the higher levels of performance and
throughput needed by next generation enterprise and telecom applications, offering
new, cost-effective ways to scale-out compute density using Intel® Architecture
processors distributed across high-speed switched backplanes.
The system is optimized for maximum CPU and network I/O density, enabling faster
packet handling to meet the increased data throughput rates needed in enterprise
networking and in telecom middle boxes. It is ideal for Network Intelligence
deployments requiring accelerated packet processing performance on 10GbE, 40GbE
and 100GbE ports in applications such as high-end network security, policy control and
traffic analysis. The first model in the Packetarium XLe for Enterprise series, the
PAC-4010 fits in just 4RU and reaches the performance levels typically only found in
specialized ATCA or proprietary network processor-based solutions, but at a fraction of
the cost.
The platform uses common IP and building blocks to bring greater cost efficiencies and
economies of scale which can then be passed on to customers.
The PAC-4010, packs up to 840 Gbps of I/O, up to 2 Tbps of switching capacity and up
to 12 Intel® Xeon®Processor E5-2600 v3/v4 CPUs in just 4RU. The integrated switch
& system control module is based on the high capacity Broadcom StrataXGS®Trident
II/II+ switch family managed by an Intel® Atom™ Processor C2000 and provides six
hot swappable PHY mezzanine module (PMM) slots to accommodate a wide choice of
10 GbE, 40 GbE and 100 GbE ports with optional LAN bypass support.
Many different payloads can be integrated into Advantech Packetarium XLe systems
and configured to address a broad range of industry applications. For more details on
integrating a specific configuration please contact your local sales representative.
Figure 1-1: PAC-4010

__________________________________________________________________________________________
PAC-4010 User Manual V1.0 Copyright 2016 Advantech Co. Ltd. All rights reserved. Page 15
1.1 Features
Highest CPU and I/O density platform in the Packetarium XL family
Up to 12 CPU blades with single Intel® Xeon® Processor E5-2600 v3/v4
Up to 2Tbps switching capacity with 100Gbps midplane connectivity per blade
Flexible I/O configurations with up to 6 PHY Mezzanine Modules (PMMs which can
host 1x100GbE, 3x40GbE, 2x40GbE, or 8x10GbE ports each
Broadcom FastPath v8.2 and Advantech Load Balancer (L2) supports
Enhanced platform management features for increased RASUM
Hot swappable and redundant AC/DC and DC/DC PSU options
Front-to-rear push-pull cooling mode. Six rear pluggable, hot swappable fan
modules with fan speed control
Optional SATA storage devices on the CPU blade and on the system mount
Optional LCD module support
1.2 Specifications
Table 1-1: PAC-4010 System Specifications
Processor
System
CPU 12 CPU blades, Single Intel® Xeon® Processor E5-2600 v3/v4 series on each
CPU blade
Switch
Up to 1.68Tbps data plane switching
capacity
Up to 320Gbps control plane switching
capacity
Up to 100Gbps connectivity per blade
External I/O
Modules &
Interface
PMM Modules
Flexible I/O with up to 6 PHY Mezzanine
Modules (PMMs) which can host
1x100GbE, 3x40GbE, 2x40GbE, or
8x10GbE ports each
Maximum 120Gbps traffic for each PHY
Mezzanine Module (PMM)
LAN 4x SFP+ for data plane 4x SFP+ and 1x QSFP+ for control plane
2x GbE for system management
Serial Console 2x RS-232 (one with RJ45 port for switch LMP and the other with mini-USB port for
ShMC)
USB 2x USB 2.0 port connect to switch LMP

__________________________________________________________________________________________
PAC-4010 User Manual V1.0 Copyright 2016 Advantech Co. Ltd. All rights reserved. Page 16
Storage SATA
Up to 2x system storages (2.5" SSD or
HDD) and 2x on-board m-SATA storages
on the switch board
Up to 2x m-SATA M.2 SSD on each CPU
blade
Cooling Technology Six rear pluggable, hot swappable fan
modules with PICMG compliant fan speed
control
Power
AC Input
Up to four redundant power supply units
with separate AC inlets
AC 200~240V, 50~60Hz, with 2+2 and
N+1 power redundancy options (max
output 3600W)
AC 100~127V, 50~60Hz, with N+1 power
redundancy (max output 3000W)
DC Input
Up to four redundant power supply units
with separate DC inlets
DC -40V - -60V, 55A, with 2+2 and N+1
power redundancy options (max output
3600W)
PSU cooling Self cooled
Output DC voltage +12V
Output Current
rating Maximum 148A@ +12V per PSU
Maximum 2A@ +12VSB per PSU
Power
Consumption
3100W (with configuration: 12x CPU blades
with 4x 2133MHz 16GB DDR4 memory and
2x M.2 SSD each blade, 6x single port
100GbE PMMs)
Shelf
management
BMC ARM 9 based controller (400MHz)
IPMI IPMI 2.0 based on Advantech IPMI Core
Interfaces RMCP, SSH, SNMP, CLI, and serial
interfaces
Sensors FRU presence, fan health, PSU health,
temperatures, input voltages
Accessibility Front CPU blades, PMMs, 2.5” SSDs or HDDs
Rear Fan modules, AC or DC PSU’s

__________________________________________________________________________________________
PAC-4010 User Manual V1.0 Copyright 2016 Advantech Co. Ltd. All rights reserved. Page 17
Physical
Characteristics
Dimensions
(HxWxD) 4U x 19” x 686mm
Weight 63kg (system weight with full configuration
(including 12x CPU blades and 6x PMMs))
Environment
Operating Non-operating
Temperature 0 ~ 40°C (32 ~ 104°F) - 40 ~ 70°C (-40
~ 158°F)
Humidity 50%@25°C to 95%@40°C (non
condensing)
95% @ 60° C
(non-condensing)
Altitude Up to 13000ft@45°C
Acoustic 61.3dB(A) (Idle mode)
Compliance
PICMG IPMI, HPM.1 firmware upgrade, HPM.2
extended message size
Safety & EMC
CB report (IEC60950-1), CE mark
(EN60950-1), UL60950-1/CSAC22.2
FCC47 CFR Part15, Class A, CE Mark
(EN55022/EN55024), RCM Mark
(AS/NZS CISPR 22), VCCI, KCC
Note!
The PAC-4010 supports two different power supply redundancy chassis, N+1
(3+1)
redundancy and 2+2 redundancy. Where N+1 power redundancy
indicates system is allowed only ONE PSU break while other THREE PSUs
still work; 2+2 power redundancy indicates system is allowed upper (or lower)
TWO PSUs break while other TWO PSUs still work.
User can select to install four AC/DC 1800W PSU as PAC-4010 AC system,
or to install four DC/DC 1800W PSU as PAC-4010 DC system.
1.3 Packing List
Before setting up the system, check that the items listed below are included and
in good condition. If any item does not accord with the list, please contact your
dealer immediately.
1x PAC-4010 AC or DC Server with optional blades and PMMs
4x AC or DC power cords (optional)
1x Rack mount slide rail (optional)
Note!
The power cord will vary depending on the
standard power outlet of the
country where it is sold.

__________________________________________________________________________________________
PAC-4010 User Manual V1.0 Copyright 2016 Advantech Co. Ltd. All rights reserved. Page 18
1.4 Ordering Information
Table 1-2: PAC-4010 Ordering Information
Model Series Description
PAC-4010-BTO 4U, 12x processor blade slots with 4x 1800W PSUs, 6x
fan modules, optional processor blades and PMMs
Table 1-3: Related Products List
Model Series Description
MIC-8301 Advantech single socket CPU blade with Intel® Xeon®
Processor E5 series
PMM-2400 8 port 10GbE PHY Mezzanine Module (PMM)
PMM-3200 2 port 40GbE PMM
PMM-3201 3 port 40GbE PMM
PMM-4100/ PMM-4103 Single port 100GbE PMM
Table 1-4: PAC-4010 Chassis FRU List
Model Series Description
PAC-4010SC2-P1AE 4U, 12x processor blade slots with 4x 1800W AC PSUs, N+1 power redundancy, 6x fan modules, w/o processor
blades and PMMs
PAC-4010SC2-P2AE 4U, 12x processor blades slots with 4x 1800W AC PSUs, 2+2 power redundancy, 6x fan modules, w/o processor
blades and PMMs
PAC-4010SC2-P1DE 4U, 12x processor blade slots with 4x 1800W DC PSUs,
N+1 power redundancy, 6x fan modules, w/o processor
blades and PMMs
PAC-4010SC2-P2DE 4U, 12x processor blade slots with 4x 1800W DC PSUs,
2+2 power redundancy, 6x fan modules, w/o processor
blades and PMMs
PAC-4010SF1-00E PAC-4010 fan module
PAC-4010SP1-ACE Power supply AC 1800W for PAC-4010
PAC-4010SP1-DCE
Power supply DC 1800W with 3m 6AWG DC power
cable for PAC-4010