Advantech B+B SmartWorx ABDN-SE-IN5410 User manual

1-888-948-2248 | Europe: [phone]
advantech-bb.com
707 Dayton Road | PO Box 1040 | Ottawa, IL 61350
Phone: [phone] | Fax: [phone]
www.advantech-bb.com | E-mail: [e-mail]
Fast and easy on the web: www.advantech-bb.com
QUICK START
GUIDE
Document Number: 710-11430-00_R0_ABDN-SE-IN54x0_0817qsg
Recommended Accessories
Model MDR-20-24
120VAC/5VDC Power Supply
or
Model PS-WDS
Power Supply with Appropriate
Cord (North America, EU, UK)
Serial Cables
Before you begin, be
sure you have the following:
ABDN-SE-IN5410 &
ABDN-SE-IN5420
Industrial Serial Device Server
+ Industrial Serial Device Server (included)
+ CD with Airborne Management Center
Software (included)
+ Antenna (included)
+ Power Supply (not included)
+ Ethernet Cable (not included)
If your device is connected and congured correctly, you
will see the following LED Status:
COMM: Green (ON when port is open)
LINK: Green
POST: Green
POWER: Blue
LED COLOR AIRBORNE DEVICE STATE
POWER
Off Adapter is not powered.
Blue Adapter is powered.
POST
Off Adapter is not powered.
Red Adapter failed Power On Self Test (“POST”) and is not cong-
ured for wireless communication.
Amber Adapter passed POST but is not congured for wireless network
communication.
Green Adapter passed POST and is congured for wireless com-
munication.
LINK
Off Adapter is not powered.
Red / Off (Periodic Blinking) Adapter is searching for a valid network
(Access Point) that matches device’s conguration.
Green Adapter has successfully associated with an Access Point.
COMM
Off
If Power LED is also Off, then Adapter is not powered.
If Power LED is On then, No TCP session from WLAN or
Ethernet interface has been established.
Green A TCP connection to the adapter has been established from the
Wireless or Ethernet interfaces but no trafc has been detected.
PIN
RS-232 (DTE)
Port 1 & 2
(Default)
RS-422/485
1No Connect No Connect
2RxD RxD +
3TxD TxD +
4No Connect No Connect
5GND GND
6No Connect RxD -
7RTS No Connect
8CTS No Connect
9No Connect TxD -
(Continued)
Check Your Setup
7
Connect the Antenna to the antenna connector located on
the side of the device.
Model C5UMB10FBG
Ethernet Cable

Product Overview
Attach the Antenna
1
Connect the Antenna to the antenna connector located on
the side of the device.
LAN
Port
Power
Port
Antenna
LEDs
Antenna
Port
Detachable
Terminal Block
Connect Ethernet
2
Connect a Cat5 Ethernet cable between the device and an
Ethernet port on a host computer.
Connect Power Supply
3
Connect the 5-36 VDC terminal block attachment or use
an AC power supply (optional).
Connect To The Device
4
Run the Airborne Management Center (AMC) application.
If you don’t currently have AMC installed, you can install
it from the included CD or download and install it from
the B+B SmartWorx website. Just search for the model
number and follow the links to download software from the
Downloads section of the product page.
Note: You may be required to wait up to 180 seconds before
the device is discovered and displayed.
When AMC starts, it will request a login:
Select Group Name: “manuf” and enter Group Password:
“dpac”
AMC will load and discover the attached device:
Manage The Device
5
AMC will ask if you want to manage the new device,
select ‘Yes’:
Select ‘Yes’ to indicate device is using Factory Default
settings:
AMC will display the found Airborne device(s):
Right click the device’s name. Under “Connectivity Tools”
choose “launch Web browser for OEM-Cfg1.” This will
open the device’s browser-based management window.
Login to web interface:
Username “dpac”
Password: “dpac”
Continue conguration via the Web interface. Start with
the Conguration -> Express Setup page.
(Continued)
Congure Your Device
6
Note: Use the Help features of the interface to help you
congure the device. When you are done conguring the
device, press ‘Commit’ to save the changes, then ‘Restart’ to
restart the device. You can optionally press ‘Reload’ if you have
further conguration changes to make.