Advantech AIM-89H Series User manual

User Manual
AIM-89H Series
13.3”Windows Tablet PC

ii
AIM-89H User Manual
Copyright
The documentation and the software included with this product are copyrighted 2023
by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right
to make improvements in the products described in this manual at any time without
notice. No part of this manual may be reproduced, copied, translated, or transmitted
in any form or by any means without the prior written permission of Advantech Co.,
Ltd. The information provided in this manual is intended to be accurate and reliable.
However, Advantech Co., Ltd. assumes no responsibility for its use, nor for any
infringements of the rights of third parties that may result from its use.
Acknowledgments
Intel and Pentium are trademarks of Intel Corporation.
Microsoft Windows and MS-DOS are registered trademarks of Microsoft Corp.
All other product names or trademarks are properties of their respective owners.
Product Warranty (2 years)
Advantech warrants the original purchaser that each of its products will be free from
defects in materials and workmanship for two years from the date of purchase.
This warranty does not apply to any products that have been repaired or altered by
persons other than repair personnel authorized by Advantech, or products that have
been subject to misuse,abuse, accident, orimproper installation. Advantech assumes
no liability under the terms of this warranty as a consequence of such events.
Because of Advantech’s high quality-control standards and rigorous testing, most
customers never need to use our repair service. If an Advantech product is defective,
it will be repaired or replaced free of charge during the warranty period. For out-of-
warranty repairs, customers will be billed according to the cost of replacement mate-
rials, service time, and freight. Please consult your dealer for more details.
If you believe your product is defective, follow the steps outlined below.
1. Collect all the information about the problem encountered. (For example, CPU
speed, Advantech products used, other hardware and software used, etc.) Note
anything abnormal and list any onscreen messages displayed when the prob-
lem occurs.
2. Call your dealer and describe the problem. Please have your manual, product,
and any helpful information readily available.
3. If your product is diagnosed as defective, obtain a return merchandise authori-
zation (RMA) number from your dealer. This allows us to process your return
more quickly.
4. Carefully pack the defective product, a completed Repair and Replacement
Order Card, and a proof of purchase date (such as a photocopy of your sales
receipt) into a shippable container. Products returned without a proof of pur-
chase date are not eligible for warranty service.
5. Write the RMA number clearly on the outside of the package and ship the pack-
age prepaid to your dealer.
Part No. XXXXXXXXXX Edition 1
Printed in Taiwan May 2023

iv
AIM-89H User Manual
Declaration of Conformity
CE Conformity Statement
Radio products with the CE alert marking comply with the RED Directive (2014/53/
EU) issued by the Commission of the European Community. Compliance with this
directive implies conformity to the following European Norms (in brackets are the
equivalent international standards).
Intended USE: The AIM-89H is intended for integration with hospital system. It is
designedfor generalpurposefor hospital environment.For data collection anddisplay
for reference. It shall not be used for life-supporting system.
The device provides input through touch panel, hard keys located at the bottom of it,
accessories through USB ports or its LAN/WLAN connections. The device computes
the input data with its processing unit and then output the generated data to LCD
panel, accessories or other devices through its I/O ports or through its LAN/WLAN
connections. The device is able to store data in its storage, and when the device is
turned off, still maintain the data in the memory units of the storage.
Has been designed and manufactured in accordance to the following technical
regulation: Medical Device Regulation : (EU)2017/745, Radio Equipment Directive :
2014/53/EU and RoHS Directive : 2011/65/EU and (EU)2015/863
EMC
◼EN 60601-1-2:2015
◼ETSI EN 301 489-17 V3.2.4 (2020-09); ETSI EN 301 489-1 V2.2.3 (2019-11)
Safety
◼EN 60601-1:2006+A11:2011+A1:2013+A12:2014
RoHS
◼EN IEC 63000:2018
RED
◼ETSI EN 300 328 V2.2.2 (2019)
◼ETSI EN 301 893 V2.1.1 (2017-05)
Products that contain the radio transmitter are labeled with CE alert marking and may
also carry the CE logo.
FCC Compliance Statement
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interfer-
ence to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful interfer-
ence to radio or television reception, which can be determined by turning the equip-
ment off and on, the user is encouraged to try to correct the interference by one of the
following measures:
◼Reorient or relocate the receiving antenna.
◼Increase the separation between the equipment and receiver.
◼Connect the equipment into an outlet on a circuit different from that to which thereceiver
is connected.
◼Consult the dealer or an experienced radio/TV technician for help.

iv
AIM-89H User Manual
◼To assure continued compliance, any changes or modifications not expressly
approved by the party responsible for compliance could void the user's authority to
operate this equipment. (Example: use only shielded interface cables when connect-
ing to computer or peripheral devices). This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two conditions: 1) This device may not
cause harmful interference, and 2)This device must accept any interference received,
including interference that may cause undesired operation. Any changes or
modifications not expressly approved by the party responsible for compliance could
void the authority to operate equipment. This device and its antenna must not be co-
located or operating in conjunction with any other antenna or transmitter. End-users
and installers must be provided with antenna installation instructions and transmitter
operating conditions for satisfying RF exposure compliance. For product available in
the USA/Canada market, only channel 1~11 can be operated. Selection of other
channels is not possible.
FCC Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled
environment for bodyworn configuration in direct contact to the phan- tom. This device
complies with FCCradiation exposure limits setforth for an uncon- trolled environment. This
equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. End user must follow the specific operating instructions for satisfying RF
exposure compliance. This transmitter must not be coloated oroperating inconjunction with
anyotherantennaortransmitter.The porta-ble device is designed to meet the requirements
for exposure to radio waves estab- lished by the Federal Communications Commission
(USA). These requirements set aSAR limit of 1.6 W/kg averaged over one gram of tissue.
The highest SAR value reported under This standard during product certification for use
when properly wornon the body The emissions are maintained within the band of operation
under all con-ditions of normal operation as specified.
IC Warning Statement
This device complies with Industry Canada’s licence-exempt RSSs. Operation is sub-ject to
the following two conditions: (1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause
undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appa-reils
radio exempts de licence. L'exploitation est autorisée aux deux conditions suiv- antes: (1)
l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout
brouillage radioélectrique subi, même si le brouillage est suscepti- ble d'en compromettre
le fonctionnement.
This radio transmitter has been approved by Industry Canada to operate with the antenna
types listed below with the maximum permissible gain and required antennaimpedance are
strictly prohibited for use with this device: (i) the device for operation in the band 5150–5250
MHz is only for indoor use to reduce the potential for harmfulinterference to co-channel
mobile satellite systems; (For devices installed in vehiclespoint i. is not required.) Users
should also be advised that high-power radars are allo-cated as primary users (i.e. priority
users) of the bands 5250-5350 MHz and 5650- 5850 MHz and that these radars could cause
interference and/or damage to LE-LAN devices.
Le present emetteur radio a ete approuve par Industrie Canada pour fonctionner

v
AIM-89H User Manual
avec les types d'antenne enumeres ci-dessous et ayant un gain admissible maximal
et l'impedance requise pour chaque type d'antenne. Les types d'antenne non inclus
dans cette liste, ou dont le gain est superieur au gain maximal indique, sont stricte-
ment interdits pour l'exploitation de l'emetteur: (i) l'appareil pour fonctionner dans la
bande 5150-5250 MHz est réservé à une utilisation en intérieur afin de réduire les ris-
ques d'interférences nuisibles à la co-canal systèmes mobiles par satellite; Devraient
également être informés les utilisateurs que les radars à haute puissance sont
désignés comme utilisateurs principaux (c.-à-utilisateurs prioritaires) des bandes
5250- 5350 MHz et 5650-5850 MHz et que ces radars pourraient provoquer des
interférences et/ou endommager les appareils LE-LAN.
IC Radiation Exposure Statement
This EUT is compliance with SAR for general population/uncontrolled exposure limits
in IC RSS-102. This equipment should be installed and operated with minimum dis-
tance 0 cm between the radiator & your body.
Cet EUT est la conformite avec SAR pour la population generale/les limites d'exposi-
tion incontrolees dans IC RSS102. Cet equipement doit etre installe et utilise a une
distance minimale de 0 cm entre le radiateur et votre corps.
This equipment complies with ISED radiation exposure limits set forth for an uncon-
trolled environment. End user must follow the specific operating instructions for satis-
fying RF exposure compliance. This transmitter must not be colocated or operating in
conjunction with any other antenna or transmitter. The portable device is designed to
meet the requirements for exposure to radio waves established by the ISED. These
requirements set a SAR limit of 1.6 W/kg averaged over one gram of tissue. The
highest SAR value reported under this standard during product certification for use
when properly worn on the body.
Cet équipement est conforme aux limites d'exposition aux rayonnements d'ISDE
établies pour un environnement non contrôlé. L'utilisateur final doit suivre les instruc-
tions d'utilisation spécifiques pour se conformer à l'exposition aux RF. Cet émetteur
ne doit pas être colocalisé ou fonctionner en conjonction avec une autre antenne ou
un autre émetteur. L'appareil portable est conçu pour répondre aux exigences
d'exposition aux ondes radio établies par ISDE. Ces exigences fixent une limite DAS
de 1,6 W/kg en moyenne sur un gramme de tissu. La valeur DAS la plus élevée rap-
portée dans le cadre de cette norme lors de la certification du produit pour une utili-
sation lorsqu'il est correctement porté sur le corps rayonnements ISED établies pour
un environnement non contrôlé. L’utilisateur final doit suivre les instructions
spécifiques pour satisfaire les normes. Cet émetteur ne doit pas être co-implanté ou
fonctionner en conjonction avec toute autre antenne ou transmetteur.
ENERGY STAR
An ENERGY STAR qualified computer delivers substantial savings over a conven-
tional computer. Desktop, integrated desktop, and notebook (laptop) computers,
workstations, small-scale servers, and thin clients are all eligible to earn the ENERGY
STAR, and those that do are now more efficient than ever. It is an honor forAdvantech
to provide you such products. What is ENERGY STAR? ENERGY STAR is a U.S.
Environmental Protection Agency (EPA) voluntary program that helps busi-nesses
and individuals save moneyand protect our climatethrough superiorenergy efficiency.
The ENERGY STAR program was established by EPA in 1992, under theauthority of
the Clean Air Act Section 103(g). Section103 (g) of the Clean Air Act directs the
Administrator to “conduct a basic engineering research and technology program to
develop, evaluate, and demonstrate non–regulatory strategies and tech- nologies for
reducing air pollution” In 2005, Congress enacted the Energy Policy Act.Section 131
of the Act amends Section 324 (42 USC 6294) of the Energy Policy and

vi
AIM-89H User Manual
Conservation Act, and “established at the Department of Energy and the Environ- mental
Protection Agency a voluntary program to identify and promote energy–effi- cient products
and buildings in order to reduce energy consumption, improve energysecurity, and reduce
pollution through voluntary labeling of or other forms of commu-nication about products and
buildings that meet the highest energy efficiency stan- dards.”
Technical Support and Assistance
1. Visit the Advantech website at www.advantech.com/support to obtain the latest
product information.
2. Contact your distributor, sales representative, or Advantech's customer service
center for technical support if you need additional assistance. Please have the
following information ready before calling:
–Product name and serial number
–Description of your peripheral attachments
–Description of your software (operating system, version, application software,
etc.)
–A complete description of the problem
The exact wording of any error messages
Environmental protection:
Follow national requirements to dispose of unit.
Manufacturer:
Advantech Co., Ltd.
No.1, Alley 20, Lane 26, Rueiguang Road Neihu District, Taipei,
Taiwan 114, R.O.C.
TEL: [phone]
Distributed in Europe by:
Advantech Service IoT GmbH
Industriestraße 15
82110 Germering
Germany
Phone: [phone]
Fax: [phone]
Email: [e-mail]
URL: http://advantech-service-iot.eu
Visit the Advantech websites at www.advantech.com or www.advantech.com.tw
if you need more information.
Authorized Representative:
MedEnvoy Switzerland
Gotthardstrasse 28, 6302 Zug, Switzerland
Emergo Europe B.V.
Westervoortsedijk 60; 6827 AT Arnhem; The Netherlands
UK Responsible Person
Emergo Consulting (UK) Limited
c/o CR360 International, Compass House,
Vision Park Histon, Cambridge CB24 9BZ,
United Kingdom

vii
AIM-89H User Manual
–
Warnings, Cautions, and Notes
Warning! Warnings indicate conditions that if not observed can cause personal
injury!
Caution! Cautions are included to help prevent hardware damage and data
losses. For example,
“Batteries are at risk of exploding if incorrectly installed. Do not attempt
to recharge, force open, or heat the battery. Replace the battery only
with the same or equivalent type as recommended by the manufacturer.
Discard used batteries according to the manufacturer's instructions.”
Note! Notes provide additional optional information.
Document Feedback
To assist us with improving this manual, we welcome all comments and constructive
criticism. Please send all such feedback in writing to [e-mail].

viii
AIM-89H User Manual
Packing List
Before system installation, check that the items listed below are included and in good
condition. If any item does not accord with the list, contact your dealer immediately.
◼Quantity x Item XXXXXXXX
◼1 x User manual
Safety Precautions - Static Electricity
Follow these simple precautions to protect yourself from harm and the products from
damage.
◼To avoid electrical shock, always disconnect the power from the PC chassis
before manual handling. Do not touch any components on the CPU card or
other cards while the PC is powered on.
◼Disconnect the power before making any configuration changes. Asudden rush
of power after connecting a jumper or installing a card may damage sensitive
electronic components.
Explanation of Graphical Symbols
IEC 60878 and ISO 3864-B.3.6: Warning dangerous voltage.
ISO 7000-0434: Caution, consultACCOMPANYING DOCUMENTS.
ISO 7000-1641: Follow operating instructions or consult instructions for
use.
IEC60417-5009: STAND-BY.
IEC 60417-5032: Alternating Current.
IEC 60417-5031: Direct Current.
ISO 7010-M002: Follow instructions for use.
CE Marking
FCC Marking
CCC Marking
UL Marking
A-Tick and C-Tick logo- Australia EMC Marking

ix
AIM-89H User Manual
VCCI Marking
China RoHS 10 year life time Symbol
BSMI Marking
Directive 2012/19/EU : The WEEE Symbol
E-Mark
TELEC Marking
NCC Marking
Serial Number Marking
Production Identifier: Lot Number Marking
GTIN code Symbol
Manufacture Date (YYMMDD) Marking
European Authorized Representative Marking
Swiss Authorized Representative Marking
Medical Device Marking
Packaging Marking (Temperature, Atmospheric Pressure and Humidity)

x
AIM-89H User Manual
Safety Instructions
1. Read these safety instructions carefully.
2. Retain this user manual for future reference.
3. Repair of the device may also only be carried out by trained service personnel.
4. Advantech recommends that a service contract be obtained with Advantech
Service and that all repairs also be carried out by them. Otherwise the correct
functioning of the device may be compromised.
Warning! Because of the danger of electric shock, never remove the box of a
device while it is in operation or connected to a power outlet.
En raison du risque d'électrocution, ne retirez jamais la boîte d'un appa-
reil lorsqu'il est en fonctionnement ou branché à une prise de courant.
5. If any of the following occurs, have the equipment checked by service person-
nel:
–The power cord or plug is damaged.
–Liquid has penetrated the equipment.
–The equipment has been exposed to moisture.
–The equipment is malfunctioning, or does not operate according to the user
manual.
–The equipment has been dropped and damaged.
–The equipment shows obvious signs of breakage.
6. Disconnect the equipment from all power outlets before cleaning. Use only a
damp cloth for cleaning. Do not use liquid or spray detergents.
7. Protect the equipment from humidity.
Caution! To avoid short-circuits and otherwise damaging the device, do not allow
fluids to come in contact with the device. If fluids are accidentally spilled
on the equipment, remove the affected unit from service assoon as pos-
sible and contact service personnel to verify that patient safety is not
compromised.
Pour éviter les courts-circuits et endommager l'appareil, ne laissez pas
les liquides entrer en contact avec l'appareil. Si des liquides sont acci-
dentellement répandus sur l'équipement, retirez l'unité concernée du
service dès que possible et contactez le personnel de service pour véri-
fier que la sécurité du patient n'est pas compromise.
8. For pluggable equipment, the power outlet socket must be located near the
equipment and easily accessible.
9. Place the equipment on a reliable surface during installation. Dropping or letting
the equipment fall may cause damage.
10. Do not leave this equipment in an uncontrolled environment where the Storage
temperature is below 0°C or above 45°C. This may damage the equipment.
Ne laissez pas cet équipement dans un environnement non contrôlé où la
température de stockage est inférieure à 0 °C ou supérieure à 45 °C. Ceci
pourrait endommager l'équipement.

xi
AIM-89H User Manual
11. Grounding reliability can only be achieved when the equipment is connected to
an equivalent receptacle marked “Hospital Only” or “Hospital Grade”.
12. Use a power cord that matches the voltage of the power outlet, which has been
approved and complies with the safety standard of your particular country.
13. If the integrity of the protective earth conductor is in doubt. Please turn off the
power switch.
14. To disconnect this product from the mains supply disconnects the mains plug
from the socket outlet. The power supply is regarded as part of this equipment.
15. Make sure user not to contact SIP/SOPs and the patient at the same time.
16. Do not switch on/off the power switch of the battery system during operation.
Warning! To avoid risk of electric shock, this equipment must only be connected
to a supply mains with protective earth.
Pour éviter tout risque d'électrocution, cet équipement doit uniquement
être raccordé à une alimentation secteur avec terre de protection.
Warning! No modification of this equipment is allowed.
Aucune modification de cet équipement n'est autorisée.
17. The power cord for use on the device shall be no less robust than ordinary
tough rubber sheathed flexible cord (IEC 60245-1:2003, Annex A, designation
53) or ordinary polyvinyl chloride sheathed flexible cord (IEC 60227-1:1993,
AnnexA, design. 53. Forthe US/CAthe requirements of the NEC and Canadian
code shall be followed (US and CA national differences).
Warning! Battery system, equipotential pin, metal wiring on equipotential pin,
wheels and brake shall be replaced/send back to maintain by the manu-
facturer every two years, risks of function failure, electrical shock, equip-
ment damage, environment pollution and etc. may occur if not doing so.
Le système de batterie, la broche équipotentielle, le câblage métallique
sur la broche équipotentielle, les roues et le frein doivent être rem-
placés/renvoyés par le fabricant tous les deux ans, les risques de défail-
lance de fonctionnement, les chocs électriques, les dommages
matériels, etc. Ce faisant.

xii
AIM-89H User Manual
18. If your computer clock is unable to keep accurate time, please check the battery.
Caution! When the battery has problem of charging. Please contact a qualified
technician or your retailer.
The computer is provided with a battery-powered real-time clock circuit.
There is a danger of explosion if battery is incorrectly replaced. Replace
only with same or equivalent type recommended by the manufacturer.
Discard used batteries according to the manufacturer's instructions.
Lorsque la batterie a un problème de charge. Veuillez contacter un tech-
nicien qualifié ou votre revendeur.
L'ordinateur est équipé d'un circuit d'horloge en temps réel alimenté par
batterie.
Il y a un risque d'explosion si la batterie est incorrectement remplacée.
Remplacez uniquement par le même type ou un type équivalent recom-
mandé par le fabricant.
Jetez les piles usagées conformément aux instructions du fabricant.
Caution! When servicing the device, always use replacement parts that meet
Advantech standards. Advantech Medical cannot warrant or endorse
the safe performance of third-party replacement parts for use with our
medical device.
Lors de la maintenance de l'appareil, utilisez toujours des pièces de
rechange conformes aux normes Advantech. Advantech Medical ne
peut pasgarantir ou endosser les performances sécuritaires des pièces
de rechange tierces à utiliser avec notre dispositif médical.
19. When networking with electrical devices, the operator is responsible for ensur-
ing that the resulting system meets the requirements set forth by the following
standards:
–EN 60601-1 (IEC 60601-1)
Medical electrical equipment
Part 1: General requirements for safety
–EN 60601-1-2 (IEC 60601-1-2)
Medical electrical equipment
Part 1-2: General requirements for safety
Collateral standard: Electromagnetic compatibility; Requirements and tests
20. Follow national, state or local requirements to dispose of unit.
21. Maintenance: to properly maintain and clean the surfaces, use only the
approved products or clean with a dry applicator.
22. Contact information:
No.1, Alley 20, Lane 26, Rueiguang Road Neihu District, Taipei, Taiwan 114,
R.O.C.
TEL: [phone]
23.
24. This equipment shall not be used as a life support system.

xii
25. Accessory equipment connected to analog and digital interfaces must be in
compliance with the respective nationally harmonized IEC standards (i.e. IEC
60950 for data processing equipment, IEC 60065 for video equipment, IEC
61010-1 for laboratory equipment, and IEC 60601-1 for medical equipment.)
Furthermore, all configurations shall comply with IEC 60601-1 ME system. Any-
one who connects additional equipment to the signal input part or signal output
part is configuring a medical system, and is therefore, responsible that the sys-
tem complies with the requirements of IEC 60601-1 ME system. The unit is for
exclusive interconnection with IEC 60601-1 certified equipment in the patient
environment and IEC 60XXX certified equipment out-side of the patient environ-
ment. If in doubt, consult the technical services department or your local repre-
sentative.
26. Use a power cord that matches the voltage of the power outlet, which has been
approved and complies with the safety standard of your particular country.
27. Position the power cord awayfrom high-traffic areas. Do notplaceanything over
the power cord.
Note! Environmental protection.
Follow national requirements to dispose of unit.
28. CAUTION: This adapter Delta/MEA-045AA2C is a forming part of the medical
device.
29. Remove the power cord to fully turn off the device when the battery pack is
empty.
30. Classification:
1). Class II
2). No applied part
3). Continuous Operation
31. CAUTION! This product: AIM-89H is used with the Qualified & certificated
power adapter: Delta/MEA-045AA2C. Input: 100-240Vac, 50-60Hz, 1A Out-
put:5Vdc/3Aor 9Vdc/3A.
32. In case of serious incident that has occurred, please contact the manufacturer
and local authorities immediately.
Notice: It is recommended to install the appropriate soft if have any question,
please contact the manufacturer for further assistance.
Notice: To prevent unauthorized access, it is recommended to install suitable
anti-virus software or do not connect to unsafe external networks
33. DISCLAIMER: These instructions are provided according to IEC 704-1 stan-
dards. Advantech disclaims all responsibility for the accuracy of any statements
contained herein.

xiv
AIM-89H User Manual
Contents
Chapter 1 Getting Started........................................1
1.1 Unpacking.......................................................................................................2
1.1.1 Inside the Box: Standard...................................................................2
1.1.2 Optional Accessories ........................................................................2
1.1.3 Optional Docking & Station...............................................................2
1.2 AIM-89H at a Glance & Description of Parts................................................3
Chapter 2 Using the Tablet .....................................4
2.1 Battery Caution...............................................................................................5
2.1.1 Battery Charge Notice.......................................................................5
2.1.2 Storage and Safety Notice................................................................5
2.2 Connecting to Power Supply................................................................. 6
2.3 Turning on and off........................................................................................ 7
2.3.1 Turning on........................................................................................ 7
2.3.2 Turning off........................................................................................ 8
2.4 Touch Screen Operation.............................................................................. 9
2.4.1 The Touchscreen Supports Core Gesture.....................................10
2.4.2 Cleaning and Disinfecting Instruction.............................................10
2.5 Waking up the Tablet...................................................................................10
2.6 Using the Strat Button..................................................................................11
2.7 Using the Windows Taskbar........................................................................12
2.8 Using the Action Center...............................................................................12
2.9 Using the Windows Setting..........................................................................13
Chapter 3 Networks and Wireless Devices.......14
3.1 Connecting to Wi-Fi Network.......................................................................15
3.2 Adding Wi-Fi Network ..................................................................................16
3.3 Connecting Bluetooth Device to Tablet......................................................19

Chapter 1
Getting Started

2
AIM-89H User Manual
1.1 Unpacking
1.1.1 Inside the Box: Standard
1. Tablet PC
2. PowerAdaptor
3. Power Cord
Your package may include below peripherals based on your order.
1.1.2 Optional Accessories
◼Carry Strap
◼Hand Strap
◼Shoulder Strap
1.1.3 Optional Docking & Station
◼Desk Docking
◼VESA Mount Bracket
Chapter 1
Getting Started
Carry Strap
Shoulder Strap
Hand Strap
Desk Docking
VESA Mount
Bracket

3
AIM-89H User Manual
1.2 AIM-89H at a Glance & Description of Parts
No
Item
Description of Parts
1
Microphone
Capture audio input.
2
5MP Front Camera
5.0-megapixel fixed-focus camera.
3
Ambient Light Sensor
The goal of this application is to improve the visual
experience and make the lighting comfortable for user.
4
Stereo Speaker
Emit sounds.
5
Programmable Keys
To active the customized function.
Default Setting: Mute, Brightness
6
Volume Key
Volume Control (Up) Raise volume, (Down) Lower
volume.
7
Power Button
Power on/off.
8
Power LED
Solid Green: Full charged (DC-in) Ready for use
Solid Blue: Charging (DC-in)
Blinking Blue: Battery lower than 10%
9
LAN Port
Provide a wired network connection for devices.
10
HDMI Port
Transmit high-quality audio and video signals between
devices
11
USB 3.1 Type C
High speed USB port connects to PC or USBdevices
such as type-c USB key, etc.
12
USB 3.0 Type A
Used primarily for high-speed data transfer between
devices such as mouse, keyboard, etc.
13
Audio Jack (Headset
Combo)
Audio Jack headset combo port can be transformedinto
two separate ports: one 3.5mm mic port and one3.5mm
jack.
14
Pogo Pin Connector
Port to docking solutions such as desk docking toprovide
power and external I/O.
15
Rear Camera
8.0-megapixel auto-focus camera with LED flash.

Chapter 2
Using the Tablet

5
AIM-89H User Manual
2.1 Battery Caution
Caution! Danger of explosion if battery is incorrectly replaced. Replace only with
the same type recommended by the manufacturer, discard used batter-
ies according to the manufacturer's instructions.
Danger d'explosion si la batterie est inexactement remplacée. Rem-
placez seulement avec la même chose ou le type recommandé par le
fabricant, jettent les batteries utilisées instructions de s selon fabricant
des'. Mistreat the battery used in this device may present a risk of fire or
chemical burn.
Discontinue using device immediately if you notice the battery is swelling, or looks
puffy or misshapen. Do not attempt to disassemble the computer or its accessories.
Only qualified personal is allowed to replace the battery. Do not dispose batteries in a
fire and check with local authorities for disposal instructions. can only be equipped
with standard battery pack with FUCO, ATC-63E-BAT, 4550mAH Polymer Lithium Ion
Battery. Use of another battery may present a risk of fire or explosion.
2.1.1 Battery Charge Notice
It is important to consider the environment temperature whenever you are charging
the Lithium-Ion battery pack. The process is more efficient at normal room tempera-
ture or slightly cooler. It is essential that you charge batteries within the stated range
of 0°C to 40°C. Charging batteries outside of the specified range could damage the
batteries and shorten their charging life cycle.
2.1.2 Storage and Safety Notice
Although charge Lithium-Ion batteries may be left unused for several months, their
capacity may be depleted due to the buildup of internal resistance. If this happens
they will require recharging prior to use. Lithium Ion batteries may be stored at tem-
peratures between -20° C to 60° C, however they may be depleted more rapidly at
the high end of this range. It is recommended to store within normal room tempera-
ture ranges.

6
AIM-89H User Manual
2.2 Connecting to Power Supply
The Tablet Computer operates either on externalAC power or internal battery power.
It is recommended to use AC power when you start up the Tablet Computer for the
first time.
Warning! Use only the AC adapter that included with your Tablet PC. Using other
AC adapters may damage the Tablet PC and the Battery. For users start
up the Tablet PC for the first time with internal battery power, please
make sure the battery is fully charged before using.
Utilisez uniquement l'adaptateur secteur fourni avec votre ordinateur
tablette. L'utilisation d'autres adaptateurs secteur peut endommager la
tablette et la batterie. Pour les utilisateurs qui démarrent l'ordinateur
tablette pour la première fois avec une alimentation par batterie interne,
veuillez vous assurer que la batterie est complètement chargée avant de
l'utiliser.
Perform the following to connect the Tablet pc to AC Power:
2.2.1 On the side of the Tablet PC, lift the I/O protective cover by pulling on the latch.
2.2.2 Securely plug the power cord fully into the AC adapter inlet.
Chapter 2
Using the Tablet