AEG A18FHTR14 User manual

AHT1852B
A18FHTR14
Original instructions

2
2
Important!
It is essential that you read the instructions in this manual before
assembling, operating, and maintaining the product.
Subject to technical modifications.

33
AHT1852B
x 1
x 1
x 1

4
4
A18FHTR14
x 1
x 1
x 1
x 1 x 1

55
FRONT
HANDLE
FRONT
GUARD
BLADES
BLADE
SAFETY TIP
BLADE
SHEATH
TRIGGER
REAR HANDLE
LOCK TRIGGER FOR
ROTATING HANDLE
BATTERY
OPERATOR
PRESENCE SWITCH

6
6
START
STOP
8
12
9
10
14
19
15
17
20
OPERATING THE PRODUCT
REMOVING THE BLADE
CLEANNG THE PRODUCT
REPLACING THE BLADE
REMOVINGINSTALLING THE BLADE SHEATH

77
START
STOP
8
12
9
10
14
19
15
17
20
STARTINGSTOPPING THE PRODUCT INSTALLINGREMOVING THE BATTERY PACK
ROTATING THE REAR HANDLE
STORING THE PRODUCT

8
8
1
2
2
1
click
START
STOP
INSTALLINGREMOVING THE BATTERY
PACK
STARTINGSTOPPING THE PRODUCT

99
1
2
2
1
click
START
STOP
NOTE: The product will only start if
both triggers are squeezed.
STARTINGSTOPPING THE PRODUCT

10
10
2
1
OPERATING THE PRODUCT

11 11
2
1
STOP
4
3

12
12
90°90°
click
3
1
2
ROTATING THE REAR HANDLE

13 13
90°90°
click
3
1
2
6
5
4

14
14
REMOVINGINSTALLING THE BLADE
SHEATH
1
2
4
3
2
1

15 15
1
2
4
3
2
1
NOTE: Blades should be regularly
sharpened or replaced to ensure the
best cut quality and performance of the
product.
NOTE: Replacement blades can be
ordered through the AEG Customer
Service Line or Bunnings Special Orders
Desk.
REMOVING THE BLADE

16
16
7
6
2
1
5
12
4
3
2
1
REPLACING THE BLADE

17 17
7
6
2
1
5
12
4
3
2
1
NOTE: Blades should be regularly
sharpened or replaced to ensure the
best cut quality and performance of the
product.
NOTE: Replacement blades can be
ordered through the AEG Customer
Service Line or Bunnings Special Orders
Desk.
REPLACING THE BLADE
NOTE: Do not overtighten the bolt. The
torque setting is 1.6-2.2 Nm.

18
18
1
2
7
6
5
NOTE: Do not overtighten the bolt. The
torque setting is 0.8-1.8 Nm.
1
2
3
4
CLEANING THE PRODUCT

19 19
1
2
7
6
5
1
2
3
4
NOTE: Regularly apply lubricant
to the blades to extend the life and
performance of blades.
CLEANING THE PRODUCT
NOTE: Use only plant-friendly
lubricants.

20
20
1
2
3
4
20
20
STORING THE PRODUCT
NOTE: Always store the product in a
cool, dry, well-ventilated area.
BATTERY AND CHARGER
Model AHT1852B A18FHTR14
Battery pack - A18FB4
Charger - BL1218
Compatible
battery
packs
L1815G, L1815R, L1820R, L1820S, L1820SHD, A18FB2, L1825R,
L1830R, L1830RHD, L1830R-X5, L1840R, L1840S, A18B4,
L1840SHD, A18FB4, L1850R, L1850R-X5, L1850SHD, A18FB5,
L1860R, L1860RHD, L1860B, L1860R-X5, L1890R, L1890RHD
Compatible
chargers BL1218, BLK1218, BL18DP-X5, AL1218G, AL18G, BL18S
REPLACEMENT PARTS
Blade AAHT18B
INTENDED USE
The cordless hedge trimmer is intended only for outdoor use. For safety
reasons, the product must be adequately controlled by using a two-handed
operation. It should be used in dry, well-illuminated conditions.
The product is intended to cut and trim hedges, shrubs, and similar vegetation.
It is not intended to cut grass, trees, or branches. Do not use the product for
any other purpose.
TECHNICAL DATA CORDLESS HEDGE TRIMMER AHT1852B/A18FHTR14
Rated voltage 18 V d.c.
No-load speed 2700 min-1 (SPM)
Blade length 550 mm
Cutting capacity 26 mm
Weight (without battery back) 3.0 kg
Weight with heaviest battery pack 4.2 kg
Noise emission values determined according to EN 60745-1 and EN 60745-2-15
Sound pressure level at operator’s position LpA= 79.0 dB(A)
Uncertainty K= 2.5 dB
A-weighted sound power level LWA= 89.4 dB(A)
Uncertainty K= 2.2 dB
Vibration total values determined according to EN 60745-1 and EN 60745-2-15
Vibration emission value
Front handle ah= 2.3 m/s2
Rear handle ah= 4.3 m/s2
Uncertainty K= 1.5 m/s2
*SPM (strokes per minute) is the number of strokes the connecting rod completes in one minute.
WARNING!
The declared vibration value has been measured with a standard test method and may be used to compare one tool with another.
The declared vibration value may be used in a preliminary assessment of exposure.
The vibration emission during actual use of power tool can dier from the declared total value depending on the ways in which the tool is used.
Identify safety measures to protect yourself based on an estimation of exposure in the actual conditions of use, taking account of all parts of the operating cycle
such as the times when the tool is switched o and when it is running idle in addition to the trigger time.