AeroGarden PRO100 Guide

Remove Lamp Hood from Lamp Arm:
Unplug AeroGarden; remove Bowl from Base.
Disconnect Lamp Cord from Lamp Hood
socket and remove Grow Bulbs from
Lamp Hood. CAUTION – Grow Bulbs
may be hot!
Turn AeroGarden around so the back
is facing you.
Press in on Locking Tab 1 located on
Lamp Hood vent.
At the same time, use other hand to
push up on silver ring (where Lamp Hood
attaches to Lamp Arm).
Remove Lamp Hood from Lamp Arm:
Unplug AeroGarden; remove Bowl from Base.
Disconnect Lamp Cord from Lamp Hood
socket and remove Grow Bulbs from
Lamp Hood. CAUTION – Grow Bulbs
may be hot!
Turn AeroGarden around so the back
is facing you.
Press in on Locking Tab 1 located on
Lamp Hood vent.
At the same time, use other hand to
push up on silver ring (where Lamp Hood
attaches to Lamp Arm).
Locking
Tab 1
Lamp Arm
Base
Lamp
Hood
Locking
Tab 1
Lamp Arm
Base
Lamp
Hood
REPLACING LAMP HOOD
(For AeroGarden Classic, AeroGarden Deluxe, AeroGarden PRO10 0 and AeroGarden PRO200)
REPLACING LAMP HOOD
(For AeroGarden Classic, AeroGarden Deluxe, AeroGarden PRO10 0 and AeroGarden PRO200)
© 2008 AeroGrow International, Inc.
300417AA 6/3/08
© 2008 AeroGrow International, Inc.
300417AA 6/3/08
1 1
2 2
3 3
To install Lamp Hood:
Push Lamp Cord rmly into socket in new
Lamp Hood.
Center hands over Lamp Arm and push
Lamp Hood down until you hear a “click.”
Insert Grow Bulbs; return Bowl to Base; and
plug in AeroGarden.
Refer to your Quick Start Guide for more help or
nd it online at www.aerogardensupport.com.
To install Lamp Hood:
Push Lamp Cord rmly into socket in new
Lamp Hood.
Center hands over Lamp Arm and push
Lamp Hood down until you hear a “click.”
Insert Grow Bulbs; return Bowl to Base; and
plug in AeroGarden.
Refer to your Quick Start Guide for more help or
nd it online at www.aerogardensupport.com.
1 1
2 2
3 3
4 4
5 5