Aerospace Innotech HT-PW361-S User manual

HT2.008.008SS
1
HT-PW361-S Active Anti-Tamper Wristband Tag User Manual
1 Product overview
HT-PW361-S active tags are working in the 125KHZ and 2.446GHz-2.454GHz band in
accordance with the requirements of the Telecommunications Authority in the public frequency band.
The schematic diagram of the tags is as follows:
Picture 1 HT-PW361-S Active Tamper Wristband Tag
1.1 Application
The 2.45 GHz active RFID tag is wore on person's wrist, is used to identify and track personnel
monitoring system. It is integrated with reader, incentive, computer and other components of active RFID
application system. This product is mainly used in personnel positioning and monitoring management.
1.2 Model description
HT-PW361-S is an active tamper wristband tag with LF wake up function, this user manual is used
for HT-PW361-S only
1.3 Working environment
A complete RF identification data collection is the first prerequisite for the normal operation of
HT-PW361S active tamper wristband tag. Its application is shown in picture 2.

HT2.008.008SS
2
Typic RFID application for wristband
2 Performance
2.1 Function
HT-PW361-S active tamper wristband tag is accordance with the requirements of
the Telecommunications Authority in the public frequency ban, the main function is below:
①Work frequency band 2.446GHz-2.454GHz；
②Communication conforms to Aerospace Innotech Active Communication Protocol
Standard；
③Low voltage detection, battery low voltage alarm function；
④125KHz low frequency excitation and physical wake-up function；
⑤Batteries are rechargeable and support charging status indicator lights.
2.2 Main technical indicator
2.2.1 General requirements
1) Work temperature：-10℃～50℃
2) Storage temperature：-20℃～60℃
3) Working humidity：5%～95%（25℃）
4) Battery parameter：DC 4.2V/500mAh ，Polymer rechargeable battery
5) Work current：Standby<100uA，transmit<20mA（Peak value）
6) Dimension：248mmX46mmX19mm
7) Weight：50g
2.2.2 Technical indicator
Microwave（2450MHz）send and receive info
1) Frequency Band：2.4GHz～2.4835GHz，default value is 2.45GHz

HT2.008.008SS
3
2) RF output power：0dBm±1.0dB （Set as fixed value）
3) Frequency accuracy：No less than ±20ppm
4) Void rate: 1Mbps
5) Modulation: GFSK
6) Reading range：No less than 50m @EIRP=2.0dBm（SAAT-F527A reader with 5dBi
external antenna，receiving attenuation value is 0dB）
7) Anti-confliction：Random Number Delay Algorithms
8) Max Simultaneous Tag Detection：No less than 200pcs
9) Identification rate: read 50pcs/3s
LF（125KHz）receiver
1) Frequency band: 125KHz
2) Frequency accuracy: ≦±120ppm
3) Activating range: 0.3~6m no obvious direction.（SAAT-E221B activator）
4) Debugging method and coding: OOK/ Manchester encoding
3 Structural feature
HT-PW361-S active tamper wristband is made of PC plastic mould, which is divided into four parts:
upper and lower box, wristband and tamper buckle. The outer shell material is made of PC+15% glass
fiber plastic material. The parts of the wristband are closely connected by sol, and the shell has
good structural strength.
3.1 Dimension
Picture 3 HT-PW361-S active tamper wristband tag dimensional sketch

HT2.008.008SS
4
3.2 Volume and weight
HT-PW361-S active tamper wristband tag size is 248mmX46mmX19mm，weight is：50g。
3.3 Software interface
HT-PW361-S active tamper wristband 2.4G software interfaces conform to 《Q/HT
1006-2011 2450MHz active RFID air interface parameters V13》regulations and standards.
4 Wear and test
Before wearing HT-PW361-S wristband tag, please read this manual carefully.
4.1 Wear condition
Before wearing HT-PW361-S wristband tag, please carefully check whether the product is in
good condition. If there is a shortage of damage, please contact and replace it in time.
4.2 Select wear position
HT-PW361-S wearing mainly has the following requirements:
1) Wear on the wrist of a person with the wristband facing upward and no shield affecting the
wireless signal.；
2) Choosing appropriate wrist band hole according to wrist size；
3) Fasten the anti-disassembly buckle to ensure that it cannot be disassembled by hand.
4.3 Active wristband tag debug
HT-PW361S active wristband tag debug：125KHz activating range 和2.4G communication range test
4.3.1 Activating range test
Our activator test is used to test the activating range of the wristband tag. The activating range test
can be carried out from near to far, or from far to near.
4.3.2 Communication range test
Our 2.4G reader test is used to test the 2.4G reading range of the wristband tag. 2.4G reading range
test can be carried out from near to far, or from far to near.
5 Use and operate
The reading operation of the wristband tag is carried out with a matching reader. The specific
operation process can be referred to the SAAT-F527 reader instruction.
6 Day-to-day maintenance

HT2.008.008SS
5
Tag maintenance includes the following two aspects:
2) Check installation for looseness.
3) Read and confirm the power of the wristband tag with activator and reader at regular time.
7 Battery charging
The battery charging steps are as follows：
1) Remove the anti-detachment buckle by using the matching strong magnetic base；
2) Remove the wristband and place it on the desktop with back facing up.；
3) Touch the USB magnetic suction charging wire to the wristband tag charging port according to
the mode of picture 4, pay attention to the direction of magnetic suction, otherwise it can not be
contacted.；
4) Observe the charging indicator. The charging state is red and after filling the charging state is
green.
Picture 4 Charging schematic diagram
8 Tag fault and maintenance
Common faulty: Received information indicates low power.
Please contact our company for further processing.
9 Package instructions
HT-PW361-S active tags are packaged in cutter card format, and can also be customized according
to customer requirements.

HT2.008.008SS
6
10 Transport and storage
10.1Transportation requirement
HT-PW361-S active tags meet the requirements of relevant standards such as highway, railway,
air and sea transport.
Attention in transportation: It must be guaranteed not to be eroded by severe collision, rain, chemical
corrosive drugs and harmful gases.
10.2Storage requirement
HT-PW361-S active tags long-term storage shall have the following conditions:
Environmental temperature：0℃~+50℃；
Relative humidity：≤80%；
No sharp temperature changes, no acid and other harmful gases in the surrounding air.
11 After-sale service
When users encounter unsolvable problems when using the active tags, please contact our customer
service center.
Contact:
Aerospace Innotech Co., Ltd
Address: F9, Block D, SZAAT Building,10th
Road Kejinan, Hi-Tech Park, Nanshan District,
Shenzhen City, Guangdong Province of China.
Post Code：518057
Telephone：[phone]
Fax：[phone]
Website：http://www.htrfid.com
FCC Statement
This device complies with part 15 of the FCC rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
•Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure
requirement. The device can be used in portable exposure condition
without restriction.