Blossom LED M3 R24 User manual

LED M3 R24/LED M3 R32
LED M3 R24/LED M3 R32

LED M3 R24/LED M3 R32
LED M3 R24/LED M3 R32
SCREW
(x2)
WALL PLUG
(x2)
WIRE CONNECTOR
(x2)
Electrical Drill 1/8” Drill Bit Pencil Phillips
Screwdriver Tape Measure Level

LED M3 R24/LED M3 R32
LED M3 R24/LED M3 R32
Live / Black
Field Wire
Ground / Green
Neutral / White
Neutral to white
Live to black
Ground to green.
• 5mm copper free silver mirror
• High output LED lighting:
CRI 90+, 2700-6400K CCT, IP44
• Colour changing and dimmable touch
switch for surface LED
• Vertical and horizontal mount options
• Defogger

LED M3 R24/LED M3 R32
SUPPORT LOCATION
Measure the center of the holes and mark the
drilling locations ensure marking are leveled.
INSTALL SCREWS
screw and the wall.
PLACEMENT
Place the mirror against the wall and slide down as
shown in image B.
A
B
TOP
BOTTOM
PLACEMENT
Select the desired position of the mirror.
Mark the curve at the top of the mirror.
A
B
A
B
A
B
C
2 - 3mm
A
B

[email protected]
www.BlossomUS.com
Please visit our website for more information.
Touch to turn the task light and defogger on or off.
Press and hold to change the colour temprature of task light.
Press and hold to dim or brighten the task light.