AET EagleRac AE/MSC-40 User manual

EagleRac – Collector Installation
Produced by

Parts Required:
M106 – EagleRac U Bracket
M505 – SS Hex Bolts 1” Length
AE-RM/MSC-FRM – AET/MSC Collector Rack Mount Clips
M509 – 3/8”-16 SS Nut
1. Using M106, slide M505 into rail and attach to preassembled triangles as
shown below. (Triangles not to exceed 6’ O.C. spacing)
When attaching rails to triangle, be sure the on center spacing of the rails
does not exceed the required L/5 rule (Collector length divided by 5 is the
distance of the rack mounts from the top and bottom of collectors) of the
collectors.

2. Attach AE-RM/MSC-FRM to collector using the L/5 rule. (See table
below for L/5 distance)
COLLECTOR DISTANCE OF CENTEROF MOUNT FROM
TOP AND BOTTOM OF COLLECTOR (L/5)
AE/MSC-40 2’ 0”
AE/MSC-32 1’ 7-1/4”
AE/MSC-28 1’ 4-3/4”
AE/MSC-26 1’ 3-5/8”
AE/MSC-24 1’ 7-1/4”
AE/MSC-21 1’ 4-3/4”

3. Slide M505 bolts in horizontal rails and attach the collectors using M509
as shown below.

Available EagleRac Manuals
(Available upon request)
• EagleRac Parts List
• EagleRac Triangle Assembly
• EagleRac Splice
• EagleRac Collector Installation
• EagleRac Metal Seam Roof Installation
• EagleRac Base Mounting Options