afloia COLIN User manual

AIR PURIFIER COLIN WIFI+BLE
INSTRUCTION MANUAL

CONTENTS
Please read the instructions carefully before using the product and keep them properly
POINTS FOR ATTENTION
PRODUCT OVERVIEW
INSTRUCTION
SPECIFICATION
WIFI MANUAL
APP CONNECTION FAQ
SET UP YOUR SHEDULE
CUSTOMIZE YOUR SMART LIFE
FILTER REPLACING
MAINTENANCE
FAQ
2
1
3
4
4-5
5-6
7
7-8
9
10
10-11

Before using, please read this user manual carefully and keep it for future reference.
Danger Warning
1
POINTS FOR ATTENTION
or to clean the product.
to avoid danger.
4. Do not block the air inlet and air outlet.
5. Do not insert foreign matter into the air inlet.
relevant experience and skills.
Safety Warning
Notice
1. This product is not a substitute for normal ventilation, daily vacuuming or cooking range hoods.
3. Do not place anything on the product.
4. Ensure the product is used on a stable and horizontal level.
14. Please unplug the product before moving it.
for fuel or similar purposes.
gas or chemical fumes.
5. Please leave at least 10in space on the back and sides of the product, and at least 20in space above
6. Do not put the product directly under the air conditioner to prevent condensation from dripping
into the product.

Components
PRODUCT OVERVIEW
2
Accessories
Display
panel
Back
cover
)
Touch buttons

Timer button
Control Panel
PM2.5
display
Timer Mode
068
Wind speed button Timer button
Wind speed button
5s to eliminate the expiration prompt.
Before starting, please ensure the filter is installed in place (refer to the 9th page of the manual)
Auto Mode:
WiFi button
INSTRUCTION
Power Button
Dierent flashing speeds represent dierent connection status:
96%
3
2H-4H-6H-8H-12H-24H
Long press this button for 5s to change the flashing speed of the indicator
WiFi indicator blinks quickly: WiFi of the device is on
WiFi indicator blinks slowly: WiFi and Bluetooth of the device are on
WiFi indicator always on: Connected successfully

WIFI MANUAL
4
SPECIFICATION
Model
Dimension
Weight
Rated voltage
Noise
Colin
700x310x310mm
8.3kg
65W
56dB
Part 1. Crate Afloia Home Account
1. 2 ways to install the “Afloia home” APP: ①Scan the QR code below to download it. ②Or search “Afloia
home” in the APP store or Google Play.
Part 2. Connect the device with your phone
1. Connect Automatically
1. 1 Turn on the air purifier→ Long press the WiFi button for 5S until a beep, the indicator blinks fast→
Turn on WiFi and Bluetooth of your phone→ Enter Afloia Home app→ Click “Add Device”→ “COLIN” will
be detected automatically→ Enter WiFi name and password to finish connection (Only work with 2.4GHz
WiFi network).
1. 2 If not detected automatically→ Click “Auto Scan” on the top of the phone page→ Click “Next”→ Select
“Colin” and Click ”+”→ Enter WiFi name and password→ Click “Next” to finish connecting.
If auto connection failed, turn to manual connection
2. Connect Manually
2.1 When the WiFi indicator blinks rapidly:
Connect your phone to the 2.4G network→ Enter Afloia Home app→ Click “Add Device”→ Add Manually→
Choose “Small Home Appliances”→ Air Purifier (Wi-Fi) → Click “Next” and wait for the connection→ Add
the device (COLIN), enter the WiFi name and Password (Only work with 2.4GHz WiFi network).
2.2 When the WiFi indicator blinks slowly:
Open the Bluetooth of you phone→ Enter Afloia Home app→ Click “Add Device“ → Add Manually→
Choose “Small Home Appliances”→ Air Purifier (BLE+Wi-Fi) → Click “Next”→ Enter your WiFi name and
password (Only work with 2.4GHz WiFi network) → Go to the WLAN setting interface, connect the WiFi
network named "SmartLife_Colin"→ Return to the "Afloia Home" APP to finish connection.
2. Open the "Afloia Home" app. Log in and sign up.
3. Follow the in-app instructions to set up your own “Afloia home” account.

5
APP CONNECTION FAQ
ATION
Note:
1. It only works with 2.4G Gz WiFi Network. Please switch to 2.4G if currently under 5G Network.
2. Status of WiFi indicator & it's meaning:
★ On & no blinking--- Connected successfully;
★ Blinking fast--WiFi of the air purifier is turned on;
★ Blinking slow-- WiFi and Bluetooth of the air purifier are turned on;
★ O-- WiFi and Bluetooth of the air purifier are turned o.
* The WiFi indicator will not blink while the machine is powered on or turned on.
* The connection will be cut o when the power or network o. Please restart to connect your device and
the air purifier after the power and network get right.
You can respectively switch from blinking fast, slow and o by holding the WiFi indicator each 5 seconds.
Q1: When the WiFi indicator blinks slow, a message is displayed showing that the Smartlife network can
not be connected or found.
A: It usually takes longer time to connect the air purifier to the mobile phone for the first time. Please
exit the App and reconnect it, which should be finished within 2 minutes.
Q2: When the WiFi indicator blinks slow, password is needed for the connection to Smartlife
A: Click settings on your device, go to "Afloia Home", find the Local Network and switch it on.
Q3: It is too slow to add devices when the indicator blinks fast.
A: Please exit the App and try again. Please use a faster network, or switch to another connect mode
Q4: Why is my air purifier not working as instructed?
A: Please ensure that the machine is normally connected to the power supply and stable network
connection.

Please note:
1. This air purifier can not connected to more than 1 mobile device at the same time. If it has already
been added on one device, it can not be added directly on another Mobile devices. This will cause the
air purifier on the original mobile device to go oine.
6
You can find more FAQ details from "FAQ & Feedback" in the account profile "Me", as follows.
If you want to connect the "COLIN" air purifier to other devices, just click "Share Device" from the page
below. The same COLIN can be shared to other mobile devices.
Step 1: Connect the air purifier with your mobile device first.
Step 2:

You can set the fixed time every day and turn on/o the machine.
Steps: Setting--Schedule--Add-Save
" If a time still can be activated after removal or change, please reset the timer to update cloud APP
data, or remove the air purifier from APP, add again and reset a timer.
Enter the "Smart" page and click "+" or "Crate Scene" of "Automation" to start creating one-click execution
commands and smart setting.
" Set the operation mode of COLIN according to weather changes, which is pretty worry-free and
convenient.
" If the scene does nor work as set, please remove the air purifier fro APP and add again first, and then
retry to crate a scene.
2. When the mobile phone is connected to the air purifier, the WiFi indicator remains on. When the WiFi
indicator flashes, it means that it has been disconnected from the previous mobile phone (the air purifier
has changed Web environment or a new phone is connected to the air purifier)
SET UP YOUR SCHEDULE (AUTO SWITCH)
CUSTOMIZE YOUR SMART LIFE

8
You can find more FAQ details from "FAQ & Feedback" in the account profile "Me", as follows.
Quickly Bind Alexa
Voice control: The COLIN is compatible with Amazon Alexa, you can use your air purifier without having
to lift a finger

6. Install the back cover
9
Notice:
FILTER REPLACING

10
Notice:
Clean:
Storage:
MAINTENANCE
FAQ
Issue SolutionTroubleshooting
out?
is not installed correctly.
properly connected.
see it on the display panel
·
the machine is turned on
The air volume becomes
smaller
1. ls there any dust on the surface
deviceblocked by something?30cm of spaceon the back and
sides of the product.
· Ensure the device is unplugged before maintenance.
·
·
of the unit.
·
·
not exposed to direct sunlight.
Please stop using the product immediately if any abnormalsituation occurs in the using process.
Please do not disassemble the machine to maintain by yourself.

11
Issue SolutionTroubleshooting
Excessive noise
1.Is there anything stuck on the
fan in the air outlet?
2.Is the device tilted?
3. If notthe situation above, you
· The fan has abnormal noise,
please contact customer service
immediately via
· Please check if there is any foreign
matter at the bottom of the device
causing unevenness.
Nasty smell smell?
smell. Please clean or replace the
· If the burning smell emits from the
customer service.
The reminder of replacing
replaced been removed?
· We have gone through a series of
The phone can not
connect to the device
the mobilephone turned on?
connection?
？
the phone.
can add devices manually or
automatically.
temporarily.
· Ifnone of the above problems are
contactour customer service to
help you solve this problem.
3
4
1
Inquiry about Malfunction
In the case that
Please stop using the product.
Pleaseunplug the productand contact
Warranty
Other malfunctions occur.
2

We provide satisfying consultation and services concerning your complaints, suggestions, and
recommendations upon receiving your troubled product model name, status, and contact
information.
·
·
AIR PURIFIER COLIN WIFI+BLE
INSTRUCTION MANUAL