AG Neovo M-17 User manual

1
TABLE OF CONTENT
PRECAUTIONS ..............................................................................................................2
INSTALLATION ................................................................................................................2
POWER CONNECTION ..................................................................................................... 2
USING THE BRACE .........................................................................................................2
MAINTENANCE ...............................................................................................................3
TRANSPORTING THE MONITOR .........................................................................................3
GETTING STARTED.......................................................................................................4
PACKAGE CONTENTS ......................................................................................................4
INSTALLATION OF FIRST USE ...........................................................................................5
IDENTIFYING PARTS AND CONTROLS..................................................................................6
FUNCTIONS OF THE BUTTONS AND INDICATOR: ...................................................................6
SETUP ..........................................................................................................................9
CUSTOMIZING YOUR MONITOR....................................................................................... 11
Working with OSD Group ..................................................................................... 11
Hotkey and the Characteristic Functions Introduction........................................... 13
OSD Icon List ....................................................................................................... 16
TROUBLESHOOTING.................................................................................................. 20
LCD PANEL DISPLAY TECHNICAL FEATURES AND SPECIFICATIONS ....................... 22
INTERFACE FREQUENCY ...............................................................................................23
REGULATIONS.............................................................................................................24
FCC COMPLIANCE .......................................................................................................24
INFORMATION FOR USERS APPLICABLE IN EUROPEAN UNION COUNTRIES ............................25
INFORMATION FOR USERS APPLICABLE IN UNITED STATES OF AMERICA .............................. 25
TCO’99......................................................................................................................26

2
Precautions
Installation
• Do not cover or block the ventilation ports on the rear of the monitor.
• Do not install the monitor close to heat sources such as radiators or air ducts, or in a location
exposed to direct sunlight, excessive dust, mechanical vibration, or shock.
Power connection
• Use the correct power cord for your local voltage.
• Use an accessible outlet close to the monitor.
• Do not allow anything to rest on the power cable.
• Only use the power adapter attached to the monitor.
• Disconnect the power cable from the power supply if:
 You will not use the monitor for an extended period.
 The cable is damaged or frayed.
 The monitor has been dropped or the cabinet damaged.
 A distinct change in performance indicates a need for servicing.
Using the Brace
• Adjust the brace on the back of the monitor so as to obtain a desired angle.
+30 ﾟ
+10 ﾟ

3
Maintenance
• Clean the cabinet and controls with a soft cloth lightly moistened with a mild detergent
solution. Do not use any abrasive materials or solvents such as alcohol or benzene.
• Do not rub, touch, or tap the surface of the screen with sharp or abrasive items such as pens
or screwdrivers, as the screen may scratch.
• Do not insert objects or spill liquids into the ventilation ports on the monitor’s rear, as fire,
electric shock, and / or unit failure may result.
Transporting the monitor
When transporting the monitor for repair or shipment, press the button which is the salient on the
axle of the brace and at the same time turn the brace until it tightly touches the back of the
monitor. Then wrap the monitor and its attachments with the original carton and packing
materials.

4
Getting Started
Package contents
Before beginning, ensure that the carton contains the following items:
• Monitor
• Power cord
The power cord set shall be approved according to IEC 60227 and relevant national
standard with conductors providing a cross-sectional area of 3 x 0.75min, type H05VV-F or
H03VV-F.
• Power Adapter
Must use one of the following adaptors: Li Shin LSE9901B1250 and Cable API1AD53
• Signal Cable
Analog: D-SUB Cable
Digital: DVI Cable
• USB extension line
• Audio extension line
• The driver of the monitor, the user manual and other information are contained in the
CD-ROM.
• Quick Guide

5
Installation of First Use
The installation of the monitor is very simple. What you need to do is to take the monitor from the
packing box and remove all the packing materials, and then put the monitor on the desk carefully,
rotating the brace on the back of the monitor to a fixed angle according to the arrowhead
indication. Then the monitor can be settled very well. Next, adjust the monitor to a desired
position according to the seat and other factors.

6
Identifying parts and controls
This monitor has a bran new OSD menu: The control buttons as following:
Functions of the buttons and indicator:
Button Item Function Detail
Show / Hide OSD Press this key to activate or deactivate
the OSD menu.
ON / OFF Switch
When power off, press this key; the
monitor will power on.
When power on, press this key
continuously; it will show countdown for
three seconds, and then it will power off.
Function Selection Key
Press this key once; the OSD menu will
be activated anticlockwise one by one.
Press the key continuously; the OSD
menu group will be activated
anticlockwise very quickly.
Up
Hotkey: Volume + / Mute Off
Press the key constantly; you can
increase the volume of the speaker. (If
in the state of mute, press the key
continuously, the sound will be regained
automatically.)

7
Function Selection Key
Press this key once; the OSD menu will
be activated clockwise one by one.
Press the key continuously; the OSD
menu group will be activated clockwise
very quickly.
Down
Hotkey: Volume - / Mute On
Press the key constantly; you can
reduce the volume of the speaker.
(Press the key continuously; it will mute
on.)
Setting Key Press this key; you can reduce the value
of the option.
Left Hotkey: Luminance Press this key; you can reduce the value
of the luminance.
Setting Key Press this key; you can increase the
value of the option.
Right Hotkey: Luminance Press this key; you can increase the
value of the luminance.
Light continuously (Green) Indicate that the monitor is in “on” mode.
Turn Bright and Dark Slowly
(Orange)
Indicate that the monitor is in “sleeping”
mode.
Operating
mode
indicator Extinguish Completely Indicate that the monitor is in “off” mode.
avMode Press this key, you can change the
show mode quickly.

8
Auto
Press this key; you can adjust the image
automatically.
Automatically adjust the picture and
performance. The AUTO function
should be used the first time you use the
monitor and after changing the
resolution, and /or refresh rate of the
input signal.
*To avoid others to alter the setting values of the monitor, the lock function of the OSD menu has
been designed.
Lock: When the monitor is power-off, press the and buttons at the same
time and turn on the monitor. Keep pressing the Up and Down buttons for about 5 seconds until
the words “Key Lock” appear. It indicates that the OSD menu has been locked.
Unlock: The process is the same as the above

9
Setup
Follow these directions to correctly set up your monitor.
USB Port
DC 12V
Audio In
DVI Port
VGA Port

10
1. Please turn off PC power.
2. To connect the signal cable to the VGA or DVI port on your PC. Make sure connection is
secure.
3. To connect the DC 12V plug of the power adapter to the Monitor DC 12V socket.
4. Connect the other plug of the power adapter to a power source.
5. Connect one end of the audio extension line to the interface of the Audio In, and another
end is connected to the PC Sound Card’s Audio Out jack.
6. Connect one end of the USB extension line to the USB Port, and another end is
connected to the USB Port on the back of the computer (which usually lies near the
keyboard port).
7. Turn on the computer.
8. Press the soft power switch on the monitor.
9. The display should appear. If no display appears, check Troubleshooting in the following
part of the manual.
10. Ensure that your computer display is set at 1280×1024 pixels and 60Hz. Press the AUTO
button exceeds 1 second. The monitor optimizes the display automatically.

11
Customizing your Monitor
The On Screen Display (OSD) system provides a full range of customizable tools to optimize your
display.
Important: While full customization is available, we strongly recommend using the AUTO settings,
which are preset to fully optimize your monitor’s performance. Simply presses the
AUTO button to engage the AUTO settings. It is also recommended that you execute
the AUTO function following any change made to your display from your computer.
Working with OSD Group
Press Menu to activate the OSD menu.
1. Select the icons from the OSD menu with the or .
(Press the keys continuously; the icons will move and rotate quickly.)

12
2. Press or to adjust the setting values.
(Press the keys continuously, when the setting value is number type, the value will increase
or reduce 10 every time.)
3. The usage of the rest keys can be deduced from analogy.
4. Select , and then press the key or to deactivate the OSD
menu.

13
Hotkey and the Characteristic Functions Introduction
Volume Control
Press or to change the volume.
Press the key continuously; it will mute on.
(Press the key or again; the sound will be resumed.)
Luminance
The contrast and luminance are two setting values that users adjust most frequently.
However, it is not easy for users to set the proportions of these two values properly to
acquire the best quality pictures. In view of this, ten group values of contrast and luminance
which have been tested professionally are stored in the monitor, so that the users only need
to choose from the list, and can acquire the satisfactory pictures.
Press the left or right key; set the value of the luminance.

14
avMode
Doing official work, surfing on the internet, playing computer games, seeing films and so on
are the common functions of computer. But during these activities, the factors such as the
content of displaying, the distance from the user to the monitor, etc. are different and in order
to obtain the best effect, different contrast and luminance, even color temperature are
needed to adapt to the situations, especially when environment light of day and night differs
so greatly. Now only pressing avMode Button, you can quickly and easily switch among the
text, game and film modes in two environments of day and night, to meet different
requirements.
It can be found from the picture that the avMode has two environment modes. One is the
day mode (the above line) and the other is the night mode (the below line). Every
environment mode has three options --- text mode , game mode and film mode
.
iRelax Eye Reliever
According to the rankings of American Occupational Disease during the last three years,
Computer Visual Syndrome (CVS) and Carpal Tunnel Syndrome (CTS), etc. which caused
by overtime using of the computer have risen up to the top one to sharply affect people’s
health. Our iRelax Eye Reliever, the function of protecting users’ health, can smartly remind
you to rest to keep good health according to the time of your using computer. The use of the
function is very simple. You only need to choose between 15 minutes and 60 minutes to set
the frequency of eye relax.
* You can remove the signals of the iRelax Eye Reliever or the Eye Blink at any time by
selecting the option from the OSD menu.

15
Advanced Power Saving Mode
The traditional monitors have the function of electricity-saving dormancy. But the interval of
dormancy is difficult to decide. If the interval is too long, the purpose of saving electricity can
not be achieved. While the interval is too short, after you answer a phone call, your monitor
becomes dormant and you must press the keys to awake your computer. When the LCD
monitor becomes dormant, the back lights will be turned off immediately. The frequent
turn-on and turn-off of lights will result in the lightness uneven and even shortening the life of
the lights. In view of that, we have designed the function of Smart Life Extension of Lights.
Under this mode, you only need to select the option of in the OSD menu and then you
can not only save electricity, but extend the life of the lights.
Smart USB Power Connection
Seeing that the electronic equipment such as MP3 Player, cell-phone charger, desk light and
so on, which uses the USB to supply power, has increased day by day, we have designed
the USB port which supplies power with independent power source, so that even your
computer power off, you can still use this port to supply power for your USB equipment. It is
surely convenient for you.
Standard USB Port
This monitor also has a standard USB port so that you can use the equipment which is
frequently connected. You just need to connect the USB port on the back of the monitor to
that of the computer with the attached USB extension line. Then, you can conveniently plug
the USB flash disk, USB hard disk and other equipment in the USB port on the front of the
monitor.


16
OSD Icon List
Function Detail Icon
Brightness
Contrast
Light
Sharpness
Clock
Phase
H-position
Screen
V-position
Warm
Cold
Color
Color Temperature
Normal
Auto Color

17
English
Français
Deutsch
Español
Italiano
Nederlands
РУССКИЙ
Română
繁體中文
简体中文
OSD Language
日本語
Standard Power Saving Mode
Power Manager
Advanced Power Saving Mode
User Define
Recall Factory
VGA Select input
DVI

18
iRelax Set Timer
Off, 15, 30, 45, 60 (minutes)
Left_Upper
Right_Upper
Left_Buttom
iRelax
iRelax set Position
Right_Buttom
Graphic Mode
Text Mode
ON
Power Port
OFF
Exit
Text Mode
Movie Mode
Normal Mode
Game Mode
Hot Key
Dark Mode Text Mode

19
Movie Mode
Game Mode
Volume +
Speak On
Volume –
Volume
Mute
(Speak Off)
Luminance
Power Power On / Off