AG Neovo TX-10 User manual

TX-10 LCD Monitor
User Manual
www.agneovo.com

TABLE OF CONTENTS
2
SAFETY INFORMATION
WEEE...........................................................................................................................................................4
PRECAUTIONS
Notice ...........................................................................................................................................................5
Cautions When Setting Up ........................................................................................................................... 5
Cautions When Using...................................................................................................................................6
Cleaning and Maintenance........................................................................................................................... 7
Notice for the LCD Monitor........................................................................................................................... 7
CHAPTER 1: PRODUCT DESCRIPTION
1.1 Package Contents ..................................................................................................................................8
1.2 Removal and Fitting Cable Cover .......................................................................................................... 9
1.3 Installing an Open Frame Monitor with L-Brackets ..............................................................................10
1.4 Wall Mounting....................................................................................................................................... 11
1.5 LCD Monitor Overview ......................................................................................................................... 12
1.6 Wired OSD Controller........................................................................................................................... 13
CHAPTER 2: MAKING CONNECTIONS
2.1 Connecting the AC Power .................................................................................................................... 14
2.2 Connecting Input Source Signals ......................................................................................................... 15
2.3 Connecting Audio Devices ................................................................................................................... 16
2.4 Connecting the Wired OSD Controller ................................................................................................. 16
2.5 Connecting USB for Touch Screen Control .......................................................................................... 17
2.6 Ventilation Requirements for Enclosure Locating.................................................................................17
CHAPTER 3: USING THE LCD MONITOR
3.1 Turning on the Power ........................................................................................................................... 18
3.2 Displaying the OSD Menu .................................................................................................................... 18
3.3 Adjusting Monitor Brightness................................................................................................................ 19
3.4 Adjusting Monitor Contrast ................................................................................................................... 20
3.5 Using Auto Adjustment Function .......................................................................................................... 21
CHAPTER 4: ON SCREEN DISPLAY MENU
4.1 Using the OSD Menu ........................................................................................................................... 22
4.2 OSD Menu Tree ...................................................................................................................................24
CHAPTER 5: ADJUSTING THE LCD MONITOR
5.1 Picture Menu ........................................................................................................................................25
5.2 Colour Menu.........................................................................................................................................27
5.3 OSD Menu............................................................................................................................................28
5.4 System Menu .......................................................................................................................................29
CHAPTER 6: APPENDIX
6.1 Warning Messages............................................................................................................................... 30
6.2 Timing...................................................................................................................................................31
6.3 Cleaning ...............................................................................................................................................31
6.4 Troubleshooting....................................................................................................................................32
6.5 Transporting the LCD Monitor .............................................................................................................. 33

3
TABLE OF CONTENTS
CHAPTER 7: SPECIFICATIONS
7.1 Monitor Specications .......................................................................................................................... 34
7.2 Monitor Dimensions.............................................................................................................................. 35

SAFETY INFORMATION
4
Safety Information
WEEE
Information for users applicable in European Union countries
The symbol on the product or its packaging signies that this product has to be disposed
separately from ordinary household wastes at its end of life. Please kindly be aware that
this is your responsibility to dispose electronic equipment at recycling centers so as to help
conserve natural resources. Each country in the European Union should have its collection
centers for electrical and electronic equipment recycling. For information about your recycling
drop o󰀨 area, please contact your local related electrical and electronic equipment waste
management authority or the retailer where you bought the product.

5
PRECAUTIONS
PRECAUTIONS
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Symbols used in this manual
This icon indicates the existence of a potential hazard that could result in personal injury
or damage to the product.
This icon indicates important operating and servicing information.
Notice
• Read this User Manual carefully before using the LCD monitor and keep it for future reference.
• The product specications and other information provided in this User Manual are for reference only. All
information is subject to change without notice. Updated content can be downloaded from our web site at
www.agneovo.com.
• To protect your rights as a consumer, do not remove any stickers from the LCD monitor. Doing so may
a󰀨ect the determination of the warranty period.
Cautions When Setting Up
Do not place the LCD monitor near heat sources, such as a heater, exhaust vent, or in direct
sunlight.
Do not cover or block the ventilation holes in the housing.
Place the LCD monitor on a stable area. Do not place the LCD monitor where it may subject to
vibration or shock.
Place the LCD monitor in a well-ventilated area.
Do not place the LCD monitor outdoors.
Do not place the LCD monitor in a dusty or humid environment.
Do not spill liquid or insert sharp objects into the LCD monitor through the ventilation holes.
Doing so may cause accidental re, electric shock or damage the LCD monitor.
Precautions

6
PRECAUTIONS
Cautions When Using
Use only the power cord supplied with the LCD monitor.
The power outlet should be installed near the LCD monitor and be easily accessible.
If an extension cord is used with the LCD monitor, ensure that the total current consumption
plugged into the power outlet does not exceed the ampere rating.
Do not allow anything to rest on the power cord. Do not place the LCD monitor where the
power cord may be stepped on.
If the LCD monitor will not be used for an indenite period of time, unplug the power cord from
the power outlet.
To disconnect the power cord, grasp and pull by the plug head. Do not tug on the cord; doing
so may cause re or electric shock.
Do not unplug or touch the power cord with wet hands.
WARNING:
Unplug the power cord from the power outlet and refer to qualied service personnel under
the following conditions:
• When the power cord is damaged.
• If the LCD monitor has been dropped or the housing has been damaged.
• If the LCD monitor emits smoke or a distinct odor.
Ceiling mount or mount on any other horizontal surface overhead are not advisable.
WARNING:
Installation in contravention of the instructions may result in undesirable consequences,
particularly hurting people and damaging property. Users who have already mounted the
monitor on the ceiling or any other horizontal surface overhead are strongly advised to
contact AG Neovo for consultations and solutions to help ensure a most pleasurable and
fullling monitor experience.

7
PRECAUTIONS
Cleaning and Maintenance
Do not attempt to service the LCD monitor yourself, refer to qualied service personnel.
Opening or removing the covers may expose you to dangerous voltage or other risks.
Notice for the LCD Monitor
In order to maintain the stable luminous performance, it is recommended to use low brightness setting.
Due to the lifespan of the lamp, it is normal that the brightness quality of the LCD monitor may decrease
with time.
When static images are displayed for long periods of time, the image may cause an imprint on the LCD
monitor. This is called image retention or burn-in.
To prevent image retention, do any of the following:
• Set the LCD monitor to turn o󰀨 after a few minutes of being idle.
• Use a screen saver that has moving graphics or a blank white image.
• Switch desktop backgrounds regularly.
• Adjust the LCD monitor to low brightness settings.
• Turn o󰀨 the LCD monitor when the system is not in use.
Things to do when the LCD monitor shows image retention:
• Turn o󰀨 the LCD monitor for extended periods of time. It can be several hours or several days.
• Use a screen saver and run it for extended periods of time.
• Use a black and white image and run it for extended periods of time.
There are millions of micro transistors inside the LCD monitor. It is normal for a few transistors to be
damaged and to produce spots. This is acceptable and is not considered a failure.

CHAPTER 1: PRODUCT DESCRIPTION
8
1.1 Package Contents
When unpacking, check if the following items are included in the package. If any of them is missing or
damaged, contact your dealer.
Chapter 1: Product Description
Wired OSD Controller
LCD Monitor
DisplayPort Cable
MENU
SELECT
Power Adapter(*)
Note:
• Use only the supplied power cord.
• The above pictures are for reference only. Actual items may vary upon shipment.
• (*) Must use only the supplied power adapter:
- Vendor: DELTA ELECTRONICS, INC.
- Model no.: ADP-36PH BBE
- Rating: DC 12V, 3A
Power Cord
Quick Start Guide Warranty Card
VGA Cable
Side Bracket Package
TX-10_Quick Guide_V010
Quick Start Guide
TX-10 LCD Monitor
displays.agneovo.com
USB Cable
(Touch Function)
Screw Package
M4 x 8pcs

9
PRODUCT DESCRIPTION
1.2 Removal and Fitting Cable Cover
1. Remove the screw securing the cable cover. Then remove the cable cover from the monitor.
Cable Cover
2. Connect the cables and route them through the slots on the cable cover.
3. Install the cable cover and secure it using a screw.

10
PRODUCT DESCRIPTION
4. Secure the cables to the cable cover using the cable ties.
Cable Tie
1.3 Installing an Open Frame Monitor with L-Brackets
To install an open frame monitor with L-brackets, you need the following items:
Bracket 1 X 2pcs Bracket 2 X 2pcs Screw M4 X 8pcs
1. Install the two Bracket 1 to the rear of the monitor. Then secure the brackets using the four
screws.
Bracket 1
2. Install the two Bracket 2 to the customer’s cabinet. Then secure the brackets using the four
screws.
Bracket 2

11
PRODUCT DESCRIPTION
3. Align the screw holes of the Bracket 1 with the screw holes of the Bracket 2. Then
assemble the L-bracket by securing the brackets using the screws.
1.4 Wall Mounting
To wall-mount the LCD monitor, screw the mounting bracket to the VESA holes at the rear of the LCD monitor.
100 mm
10
0 mm
Note: Take measures to prevent the LCD monitor from falling down and lessen possible injury and damage
to the monitor in case of earthquakes or other disasters.
• Use only the 100 x 100 mm wall mount kit recommended by AG Neovo. All
AG Neovo wall mount kits comply with VESA standard.
• Secure the LCD monitor on a solid wall strong enough to bear its weight.
• It is suggested to wall mount the LCD monitor without tilting it facing
downward.

12
PRODUCT DESCRIPTION
1.5 LCD Monitor Overview
RJ45USBVGAHDMIDP DC IN
Audio-Out
Front Rear
1 2 3 4 5 6 7
1Audio OUT:
Connect audio signals output (3.5 mm Stereo Audio Jack). Only applicable for DisplayPort or
HDMI input signal.
2DC IN:
Connect with the supplied power adaptor.
3DisplayPort IN:
Connect DisplayPort signals input.
4HDMI IN:
Connect HDMI signals input.
5VGA IN:
Connect VGA signals input.
6USB Type-B Port (Touch):
Connect USB for touch screen control.
7Wired OSD Controller Port (RJ45):
Connect the wired OSD controller.

13
PRODUCT DESCRIPTION
1.6 Wired OSD Controller
MENU
SELECT
1
2
3
4
5
1MENU:
• Press to display OSD menu.
• When OSD menu is ON, press to hide OSD menu or return to the previous menu.
2UP (p):
• Press to display the Brightness quick menu. Press the p/qkey to adjust the brightness level.
• When OSD menu is ON, press to select a main item, select sub-item function, or adjust the
settings.
3DOWN (q):
• Press to display the Contrast quick menu. Press the p/qkey to adjust the contrast level.
• When OSD menu is ON, press to select a main item, select sub-item function, or adjust the
settings.
4SELECT:
• For VGA input signal source, press to perform auto adjustment.
• When OSD menu is ON, press to conrm the selection or select sub-item function.
5POWER ( ):
Press to turn the power on or o󰀨.

CHAPTER 2: MAKING CONNECTIONS
14
CAUTION:
Make sure that the LCD monitor is not connected to the power outlet before making any
connections. Connecting cables while the power is ON may cause possible electric shock or
personal injury.
2.1 Connecting the AC Power
1. Connect the power cord to the power adapter.
2. Connect the power adapter to the DC power input at the rear of the LCD monitor.
3. Connect the power cord plug to a power outlet or a power supply.
DC IN
CAUTION:
When unplugging the power cord, hold the power cord by the plug head. Never pull by the
cord.
Chapter 2: Making Connections

15
MAKING CONNECTIONS
2.2 Connecting Input Source Signals
Input source signals can be connected with either of the following cables:
VGAHDMIDP
VGAHDMIDP
• DP
Connect one end of a DP cable to the DP connector of the
LCD monitor and the other end to the DP connector of the
computer.
• HDMI
Connect one end of an HDMI cable to the HDMI connector
of the LCD monitor and the other end to the HDMI
connector of the computer.
• VGA
Connect one end of a D-Sub (VGA) cable to the D-Sub
(VGA) connector of the LCD monitor and the other end to
the D-Sub (VGA) connector of the computer.

16
MAKING CONNECTIONS
2.3 Connecting Audio Devices
• Audio Output
Connect a headphone to the headphone jack of the LCD monitor.
Audio-Out
2.4 Connecting the Wired OSD Controller
Connect the wired OSD controller to the RJ45 connector of the LCD monitor.
RJ45
MENU
SELECT

17
MAKING CONNECTIONS
2.5 Connecting USB for Touch Screen Control
Connect one end of a USB cable to the USB connector of the LCD monitor and the other end to the USB
connector of the computer.
USB
USB
2.6 Ventilation Requirements for Enclosure Locating
To allow heat to disperse, avoid installing the LCD monitor directly on the cabinet wall and make sure the
operating/storage temperature/humidity requirements are met as described below:
• Operating temperature (independent of altitude): 0°C-50°C (32°F-122°F)
• Non-operating temperature (independent of altitude): -20°C-60°C (-4°F-140°F)
• Operating humidity (non-condensing): 20%-80%
• Non-operating humidity (38.7°C (101.7°F) maximum wet bulb temperature): 10%-90%

CHAPTER 3: USING THE LCD MONITOR
18
3.1 Turning on the Power
1. Connect the power to the LCD monitor. Refer to page 14.
2. Connect the wired OSD controller to the LCD monitor. Refer to page 16.
3. Press the key on the wired OSD controller to turn the LCD monitor on.
MENU
SELECT
Power Key
When the LCD monitor is turned on, press the key on the wired OSD controller to turn o󰀨 the LCD
monitor.
Note: The LCD monitor still consumes power as long as the power cord is connected to the power outlet.
Disconnect the power cord to completely cut o power.
3.2 Displaying the OSD Menu
Press the MENU key to open the OSD menu. Press the MENU key again to close the OSD menu.
For more information on adjusting settings, refer to page 22.
MENU
SELECT
Contrast
Brightness
H-Position
V-Position
Phase
Clock
Auto Adjust
<Select>=Enter, <▲,▼>=Move, <Menu>=Exit
50
80
50
50
14
50
Picture Colour OSD System
MENU Key
Chapter 3: Using the LCD Monitor

19
USING THE LCD MONITOR
The following menu appears on the screen:
Contrast
Brightness
H-Position
V-Position
Phase
Clock
Auto Adjust
<Select>=Enter, <▲,▼>=Move, <Menu>=Exit
50
80
50
50
14
50
Picture Colour OSD System
3.3 Adjusting Monitor Brightness
Press the pkey to open the Brightness quick menu.
MENU
SELECT
Brightness
Press<▲,▼> to Adjust and <Menu> to Exit
50
UP Key
The following menu appears on the screen:
Brightness
Press<▲,▼> to Adjust and <Menu> to Exit
50
Then press the p/qkeys to adjust the LCD monitor brightness level.

20
USING THE LCD MONITOR
3.4 Adjusting Monitor Contrast
Press the qkey to open the Contrast quick menu.
MENU
SELECT
Contrast
Press<▲,▼> to Adjust and <Menu> to Exit
50
DOWN Key
The following menu appears on the screen:
Contrast
Press<▲,▼> to Adjust and <Menu> to Exit
50
Then press the p/qkeys to adjust the LCD monitor contrast level.