Agora Outdoor Living PC-15000 Quick start guide

Assembly Instrucons and
Owner’s Manual
Dimensions: 10’ W x 13’ L x 10’ H
Item Number: PC-15000
(Actual canopy top colors may vary)
Heritage Gazebo
Agora Outdoor LivingTM
Design and Manufacture by
Pacific Currents Inc.

22012 PC-15000
First, compare the parts in the box with the parts list on the following pages and
make sure that none are missing. If you discover any missing parts, please visit
www.pacificcurrentsinc.com or call [phone].
Save your sales receipt as you
will need this to obtain service.
Choose and measure the final locaƟon where you would like to place the prod-
uct and ensure that it will fit a 10’ x 13’ rectangle with 10’ height clearance. Then,
choose an assembly area as close as possible to this final locaon and large enough
to layout and pre-assemble all the parts for this Gazebo.
It is highly recommended that you cover the work surface with a tarp or other fabric
to prevent scratches to the finish or other damage during assembly.
You will need these addional tools: a ladder and an adjustable wrench.
You may also need these addiontal tools (oponal): work gloves, waterproofing
spray.
Prepare the work area:
General Notes:
Pre-Assembly Steps
Thank you for choosing a Pacific Currents Product.
Please make sure you have carefully read and understood
these assembly instructions before you begin.
1. You will need the help of another person to assemble this product. Please ask a
friend or neighbor for assistance!
2. Once a unit has been pre-assembled in each step, please set it aside unl further
instrucons.
3. For all customers, we highly recommend that you remove your canopy top in
cases of severe inclement weather such as thunderstorms. Damage due to acts of
nature are not covered in the warranty.
4. You do not need to disassemble the gazebo during winter months. However, to
prevent damage to the frame and canvas top due heavy snow loads, remove the
canvas top and store it in a dry locaon unl spring.

PC-15000 2012 3
Parts Idenficaon
C
E
D
AB
F
G
(Note: Not drawn to Scale)
x 4 x 2
x 2
x 2
x 2
x 1
x 4

42012 PC-15000
Kx 4 Jx 4
Ix 4
Lx 1
Mx 1
Wx 8
Xx 8

PC-15000 2012 5
***Important***
For missing or defecƟve parts, Do NOT return to the place of purchase. Call our toll free
number below or visit www.pacificcurrents.com. Please have your sales receipt ready
when you call.
888-474-2770
O
N
x 1
x 1

62012 PC-15000
Hardware Idenficaon
[x 16]
M6 x 15mm Length Bolt
Bolt Set
Q
[x 8]
[x 16]
M6 x 50mm Length Bolt
M6 x 40mm Length Bolt
Bolt Set
Bolt Set
S
R
How to use Hardware
Bolt and Washer Assembly
(Parts Q and R)
Bolt and Washer Assembly
(Part S)
Snap on Nut Cap
Snap on Bolt Cap
Washer
Washer Washer

PC-15000 2012 7
Assembly Instrucons
Step 1
Assemble the Main Beams [x 4]
[x 8]
[x 2] [x 2][x 2] [x 2]
S
B DC E
S
S
V
V
E
E
T
T
D
D

82012 PC-15000
Step 2
Assemble the Four Main Beams to Poles [x 4]
[x 16]
R
[x 4] [x 2] [x 2]
AB & C D & E
A A
D + E
B + C
A
B + C
D + E
R

PC-15000 2012 9
Step 3
Assemble the Corner Bars to Top and Main Beams [x 4]
[x 8]
Q
[x 4] [x 4] [x 2]
F G J
OK!
Push the snap lock into the tube
using the ground stake. Step 1:
Step 3:
Step 2:
OK!
Push in the snap lock using a
ground stake.
Install new snap lock using
ground stake.
Push the damaged snap lock into
the part using ground stake.
NOTE: Before performing Step 3, make sure all
instances of Part X are in place. See Part X replace-
ment instrucons below:
The original locations & Desc of Snap lock
Location Desc Picture Description
Tool Description
Ground stake
(In the
hardware kit for
original
Gazebo)
Top connector
1. If snap lock is missing, please
install it as shown:
2. If snap lock is damaged, please
replace it as shown.

10 2012 PC-15000
J
G
J
F
Step 4 Connued
Assemble Corner Bars to Top and Main Beams [x 4]

PC-15000 2012 11
Step 4 Connued
Assemble Corner Bars to Top and Main Beams [x 4]
F
F
G
G
Q
Q

12 2012 PC-15000
K
I
I
Step 5
Assemble the Top Middle Link Rod to Top Connector [x 4]
[x 4] [x 4]
Q
I K
Q
[x 8]
F
I
I
K
K

PC-15000 2012 13
L
W
Step 6
Step 7
Stake the Poles [x 4]
AƩach the Cover [x 1]
[x 8]
[x 1]
W
L

14 2012 PC-15000
Step 8
AƩach Top Cover to Cover [x 1]
L
L
M
M
[x 1]
M
Aach air vent neng
onto canopy with velcro

PC-15000 2012 15
Unzip UnzipUnzip
Step 9
Unzip Bug Screen Neƫng into 4 Pieces
[x 1]
N
N
N

16 2012 PC-15000
Inside Outside
Inside
N
Step 10
Aach and Secure Bug Screen Neng
(Oponal) Install bug screen and/or sun shade
Tie neng onto
colums using
cords.

PC-15000 2012 17
Unzip UnzipUnzip
Step 11
Unzip Sun Shade to 4 Pieces
[x 1]
O
O
O

18 2012 PC-15000
Inside
Outside
Outside
Step 12
Aach and Secure Sun Shade
(Oponal) Install bug screen and/or sun shade
O
Tie neng onto
colums using
cords.

PC-15000 2012 19
Outside
Outside
Step 13
Zip Sun Shade Pieces Together
Zip 2 pcs neng
together
Slide neng
to corners if
desired.
O
O

20 2012 PC-15000
N
Inside
OPTION A
Zip Up Bug Screen, Tie Back Sun Shade
If desired, use straps to
keep Sun Shade open
Zip 2 pcs neng
together
N