felton industries FELEPG5T6 User manual

DESCRIPTION Qty
FELEPG5T6_BASE FRAME 5
FELEPG5T6_GROUND CHANNEL 3
FELEPG5T6_PLANK L3075 18
FELEPG5T6_PLANK L4975 4
FELEPG5T6_SKIRTING BOARD L3000 10
FELEPG5T6_SKIRTING BOARD L1510 6
FELEPG5T6_STAIR PLANK L1432 4
AS-NZS 2465 Bolt - 1/4" x 1" 244
AS-NZS NYLON Nut - 1/4" 244
AS-NZS 2465 Bolt - 1/2" x 3.5" 37
AS-FLAT WASHER - 1/2" 98
AS-NZS NYLON Nut - 1/2" 49
AS-Screw-ST4.5x25 84
AS 1112 Bolt - 3/8" x 3" 16
AS 1112 Nut - 3/8" 16
Page 1 of 2
ITEM
1
2
3
4
5
6
7
8
9
10
11
12
14
15
13
6mtr ELITE PORTABLE GRANDSTAND
[Code No: FELEPG5T6]
2
WARNING: This assembly required two or more people as lifting is involved. Please ensure bolts and nuts are only finger-
tightened throughout assembly for flexibility in
lining up components. Bolt and nuts should be securely tightened in place when instructed to do so. Please check all components are included before proceeding with the
assembly
ASSEMBLY INSTRUCTION
Thank You
FOR CHOOSING FELTON INDUSTRIES
1800 22 00 55
[email protected]
www.felton.net.au
1800 05 91 58
Felton Industries Pty Ltd | ABN: 17 130 687 240
1
3
4
Attach five base frames
to three ground channels by using bolts , washers and
nuts as illustrated.
Attach four stair planks onto base frames by using bolts and nuts as illustrated.
Attach eighteen short planks
and four long planks onto five base frames by using
bolts and nuts as illustrated. Note that all planks should be attached from top to bottom.
Fasten ten long skirting boards and six short skirting boards firmly onto virtical tubes on
all base frames by using self-tapping screws . Ensure that boards & are fastened
from joining points as inllusrated towards outer ends to avoid length shortage.
3
4
5
6
"This product has been
manufactured in Australia to the
highest quality standard,
guaranteeing proven quality,
durability and low maintenance"

DESCRIPTION Qty
FELEPG5T6_MAIN UPRIGHT BAR 3
FELEPG5T6_AL TUBE 25x25xL3210 4
FELEPG5T6_BACK RAILING 2
FELEPG5T6_ LEFT SIDE RAILING 1
FELEPG5T6_RIGHT SIDE RAILING 1
AS-NZS 2465 Bolt - 1/2" x 4.5" 6
AS-NZS 2465 Bolt - 1/2" x 5.5" 4
AS-NZS 2465 Bolt - 1/2" x 6.5" 2
Page 2 of 2
ITEM
16
17
18
19
20
21
22
23
6mtr ELITE PORTABLE GRANDSTAND
[Code No: FELEPG5T6]
6
WARNING: This assembly required two or more people as lifting is involved. Please ensure bolts and nuts are only finger-
tightened throughout assembly for flexibility in
lining up components. Bolt and nuts should be securely tightened in place when instructed to do so. Please check all components are included before proceeding with the
assembly
ASSEMBLY INSTRUCTION
Thank You
FOR CHOOSING FELTON INDUSTRIES
1800 22 00 55
[email protected]
www.felton.net.au
1800 05 91 58
Felton Industries Pty Ltd | ABN: 17 130 687 240
5
7
8
Attach three upright bars to the back of base frames by using bolts , washers , and
nuts as illustrated. Ensure all fasteners are attached at the right positions on upright bars.
Attach four tubes 25x25
onto base frames and upright bars to support the assembly
structure by using bolts , bolts , washers , and nuts as illustrated.
"This product has been
manufactured in Australia to the
highest quality standard,
guaranteeing proven quality,
durability and low maintenance"
22
23
Attach back railing , left side railing , and right side railing to base frames by using
bolts , washers and nuts as illustrated.
Tighten completely all bolts and nuts with spanners and appropriate tools.
The grandstand is now ready to be used.