Agreto AgriCounter Load User manual

© AGRETO electronics GmbH
User Manual
AGRETO AgriCounter Load
12.7.2019

AGRETO AgriCounter Load
© AGRETO electronics GmbH page:2
Content
1Introduction........................................................................................................... 3
2Scope of delivery .................................................................................................. 3
3Intended use......................................................................................................... 3
4Security................................................................................................................. 3
4.1 Safety instructions for the buyer......................................................................................3
4.2 Safety instructions for the operator .................................................................................4
4.3 Personal protective equipment .......................................................................................4
4.4 Residual risks..................................................................................................................4
5Technical specifications ....................................................................................... 5
6Configuration ........................................................................................................ 5
6.1 Selection of the operating mode.....................................................................................5
6.2 Operating Keys ...............................................................................................................6
6.3 Setting the operating mode ............................................................................................6
6.4 Process of detecting a load ............................................................................................7
6.5 Setting the parameters....................................................................................................8
6.6 Zeroing the counter.......................................................................................................12
7Assembly ............................................................................................................ 13
7.1 Positioning of the meter ................................................................................................13
7.2 Fixing the mounting plate.............................................................................................13
7.3 Fastening the counter ...................................................................................................14
7.4 Attaching the seal .........................................................................................................14
8Working with the device...................................................................................... 15
8.1 Reading the loads.........................................................................................................15
8.2 Reading the hours ........................................................................................................15
8.3 Symbols on the display.................................................................................................16
9Maintenance and cleaning ................................................................................. 17
10 Troubleshooting.................................................................................................. 17
10.1 The battery symbol lights up .....................................................................................17
10.2 Loads are not counted completely............................................................................17
10.3 Too many loads are counted.....................................................................................17
10.4 Operating hours are not counted completely............................................................18
10.5 Too many operating hours are counted ....................................................................18
10.6 Damage to the device ...............................................................................................18
11 Warranty ............................................................................................................. 19
12 Disposal.............................................................................................................. 19
13 Imprint................................................................................................................. 20

AGRETO AgriCounter Load
© AGRETO electronics GmbH page:3
1Introduction
Thank you for choosing an AGRETO AgriCounter Load. You have acquired a
robust tool for daily use.
Please read this manual carefully before using the equipment.
2Scope of delivery
1 Display unit
1 Mounting plate
2 AAA batteries
5 Seals
Mounting parts
Manual
3Intended use
The AGRETO AgriCounter Load is designed for the counting of loads on slurry
tanks with level indicators and transport vehicles with moving parts.
The activation takes place by the determination of sequences of position
changes of the counter. Depending on the setting, the operating hours are also
determined.
4Security
4.1 Safety instructions for the buyer
Important!
Make sure that every person who works for the first time with the
AGRETO AgriCounter, has read and understood this manual.

AGRETO AgriCounter Load
© AGRETO electronics GmbH page:4
4.2 Safety instructions for the operator
DANGER!
The AGRETO AgriCounter may only be operated by persons who
are familiar with the operation of the device.
CAUTION!
Keep the work area clean! Soiled areas contributes to accidents.
RISK!
Risk of injury from tip-over / fall and inattention while working with
the measuring instrument during getting on and off the tractor.
4.3 Personal protective equipment
WARNING!
For individuals who work with the device or reside in the working
area the wearing of safety shoes are required.
4.4 Residual risks
When using the device residual hazards for persons and objects may occur that
can‘t be prevented by design or technical protection measures.
WARNING!
The AGRETO AgriCounter must not be operated in explosive
areas.

AGRETO AgriCounter Load
© AGRETO electronics GmbH page:5
5Technical specifications
Packaging dimensions: 220x160x50 mm (LxWxH)
Package weight: 450 g
Device dimensions: 73 x 52 x 33 mm (WxHxD)
Weight: 230 g
Dust and waterproof plastic housing
3 internal control buttons for configuration
Six-digit display with 11 mm digit height
Icons for displaying additional information
Powered by 2 x AAA batteries
Battery life approx. 3 years
6Configuration
6.1 Selection of the operating mode
The AGRETO AgriCounter Load has 2 operating modes. In the first mode, only
the amount of loads are counted, in the second mode additionally the working
hours are counted.
First, decide which operating mode is suitable to your application, set the
required settings if necessary, and then mount the counter on your machine!
Overview of the modes:
Operating mode
Output
Activation by
3 A (default)
Loads
Location / sequenz
3 B
Loads
Operation hours
Location / sequenz
Vibration / movements