AGT INDUSTRIAL AGT-SSRPB80 User manual

https://www.agrotkindustrial.com/
AGT Industrial
Product manuals
Skid Steer Rock Picker Bucket
Model:AGT-SSRPB80
Ver.1.1.4
https://www.agrotkindustrial.com/

https://www.agrotkindustrial.com/
Directory
Product introduction 1/14
Operator 2/14
Safety precautions 3/14
Technical parameters 4/14
Installation 7/14
Handing safety 9/14
Limited Warranty 14/14
P1

https://www.agrotkindustrial.com/
sales@agrotkindustrial.com
1
Product introduction
1. The speed of moving, removing and sorting rocks from farms or work sites is very fast, and
can remove rocks as small as 2 inches or as large as 2 feet in diameter.
2. With its 1-inch-thick high-carbon steel tines and hydraulic power that can rotate 360 degrees,
the reel can quickly and easily pick up concrete, gravel, wood and other general debris.
3. Save you time and money, so as to better recover your equipment investment.
4. Designed in accordance with industry-leading standards and has heavy-duty features that can
handle the most difficult Work.
5. Quickly picks up rocks with diameters of 20 cm to 50 cm from the ground.
6. The hydraulic introducer pushes the rocks to the bottom of the bucket, separating the soil.
7. The picker is mounted on the arms of a skid steer or telescopic loader.
8. Compact design, and all materials are robust agile and very easy to handle.
9. Ideal for working in areas with low rock density.
10. Lightweight and suitable for use on all types of ground and in all spaces.
11. Easy and quick maintenance.

https://www.agrotkindustrial.com/
sales@agrotkindustrial.com
2
Operator
Congratulations on owning this Skid Steer Rock Picker Bucket! Your Skid Steer Rock Picker
Bucket are carefully designed and manufactured to provide you with years of reliable service.
Your Skid Steer Rock Picker Bucket will need some minor maintenance to keep it in excellent
working condition.
Please follow all safety precautions and maintenance procedures described in this manual.
Please read and understand the instructions in this manual carefully before operation.
Please refer to the "Safety Labels" section for all instructions noted above.
No one is allowed to operate his equipment who has not fully read and understood this
manual and has not been trained in safe deposit box operations.
Remember to use only parts replaced by the manufacturer.
Replacement parts may not meet the standards required for safe and reliable operation.

https://www.agrotkindustrial.com/
sales@agrotkindustrial.com
3
Safety precautions
BEFORE OPERATION
1. The operator must read the operation manual carefully before installation, operation or
maintenance. Improper operation will cause the machine damaged or the operator dead.
2. Read all the safe signs and safe declarations. Obey all the professional safe terms, local
laws or the professional directions.
3. Familiar with the duty Skid Steer Rock Picker Bucket about functions, specs and operation.
Replace the to-be-damaged parts in time. Make sure all the hydraulic installations and
couplings connect firmly, and all the safe signs stick on the suitable positions clearly.
ALWAYS watch for overhead power lines.
NEVER position your body or limbs under an unsupported cutter deck.
NEVER position your body or limbs under an unsupported cutter deck.
NEVER operate this rock bucket when bystanders are within 300 feet of your work area.
Flying debris could cause serious injury or death.
NEVER position your body or limbs under an unsupported cutter deck.
DO NOT allow this machine to contact buildings, utilities, large rocks or tree stumps or
you may lose control of the skid steer loader.
NEVER use drugs or alcoholic beverages while operating or servicing this machine.
ALWAYS operate this attachment during daylight or well-lit areas.
To prevent the skid steer loader and implement from rolling forward, stop the engine and
set the parking brake when exiting the skid steer loader. Inspect implement for missing
hardware prior to using this machine.
DO NOT allow children to play on or around this equipment at any time. Store this
implement in an area not frequented by children.
ALWAYS wear the proper personal protection equipment while operating or servicing
this machine.
NEVER operate or service this machine with bare feet, sandals, or other light footwear.
ALWAYS use eye protection while operating or servicing this machine.
DO NOT speed! Keep your driving speed between 2 and 5 mph. Wear appropriate safety
glasses, goggles or face masks Control Skid Steer Rock Picker Bucket work, or any
operation caused by dust, flying Debris, or any other hazardous material.
Wear appropriate safety glasses, goggles or face masks Control
rock picker work, or any operation caused by dust, flying Debris, or
any other hazardous material.

https://www.agrotkindustrial.com/
sales@agrotkindustrial.com
4
Technical parameters
P5
Model:
SSRPB80
Hydraulic circuits:
1
Working width:
78 in
Total width:
63″
Total height:
41″
Total length:
88″
Total weight:(lb)
1499
Motor:
Cycloid Motor
Working Width:
78 in
Working Pressure (MPa)
17
Flow (L/min)
60-100
Maximum Speed of Picking Up
Stones (r/min)
62
Min. Picking Stone Diameter
19/16''
Work environment:
Temperature: - 20 ~ 50 ℃
Height: 100 meters or less
Relative humidity :≤85%

https://www.agrotkindustrial.com/
sales@agrotkindustrial.com
5
Technical parameters

https://www.agrotkindustrial.com/
sales@agrotkindustrial.com
6
S/N
PART DESCRIPTION
QTYS
NOTE
1
Frame welded
1
2
Holding claw shaft welding
1
3
Sprocket guard soldered
1
4
11 tooth sprocket welding
1
5
25 tooth sprocket welding
1
6
After netting
1
7
Sprocket guard retaining rod
2
8
Sprocket tension adjusting wheel
1
9
Bearing seat baffle plate
2
10
Long clamp
2
11
Short clips
2
12
Bolt(M12*80)
5
13
Bolt(M12*130)
5
14
Spring washers(φ16)
12
15
Hexagonal nut(M16)
14
16
Bearing with square seat
2
17
Spring washers(φ12)
20
18
Hexagonal nut(M12)
19
19
Spring washers(φ10)
4
20
Hexagonal nut(M10)
4
21
Bolt(M10*30)
4
22
Spring washers(φ8)
1
23
Bolt(M8*25)
1
24
Bolt(M12*25)
1
25
Butterfly nut(M16)
2
26
Flat washer(φ12)
2
27
Bolt(M12*70)
1
28
Bolt(M12*35)
4
29
The chain
1
30
Upper sprocket locking gasket
1
31
Bolt(M12*50)
3
32
Tool shaft retaining washer
1
33
Two motors
1
34
Bolt
8

https://www.agrotkindustrial.com/
sales@agrotkindustrial.com
7
Installation
Unpack and check
Check for missing or damaged components according to the packing list.
If you have any questions, please contact the supplier. List of details
As the table above:
Machine installation
Equipment must be installed on a solid concrete floor or similar. If the ground is not firm, it will
not be able to connect to the loader. There should be a space around the device for easy
operation.
Connecting Brush Cutter
Connecting Rock Bucket Consult your skid steer operator’s manual for specific instructions on
how to connect to your rock bucket loader.
General Attachment Method
1. Make sure the hydraulic lines are clear from the front side of the rock bucket attachment
plate and that the locking pins on the skid steer mounting plate are retracted.
2. Drive forward and place top of skid steer mounting plate under the attachment mounting
flange. See Figure below.
3. 3. Slowly raise and tilt back the skid steer mounting plate untilthe brush cutter attachment
plate rests flat against the skid steer mounting plate.
4. Activate your skid steer’s lever lock switch to engage and lock the pins into the flange slots
of the brush cutter’s attachment plate. If your skid steer does not have this switch, push the
latch handles down until you can see the lock pins extend into the attachment flange.
5. Connect the attachment hydraulic hoses and the case drain hose (SBCNS model only) to
the auxiliary supply couplers located on your skid steer loader lift arm.
Skid Steer Mounting Plate to Attachment Mounting Flange

https://www.agrotkindustrial.com/
sales@agrotkindustrial.com
8
Installation
Note: this drawing does not represent the appearance of the
equipment
For actual purchase, this figure is only for installation location
reference.
Tubing connection: the rock bucket is equipped with two tubing, one is
the inlet tubing and the other is the outlet tubing. Connect the tubing
to the loader tubing connection.

https://www.agrotkindustrial.com/
sales@agrotkindustrial.com
9
Handling safety
Maintenance Overview
The maintenance procedures described in this manual should only be carried out by qualified
mechanics who have been trained to repair this machine.
Some procedures require special tools and skills to complete. DO NOT attempt to repair or
perform service work on this machine unless you have the skills and tools to do so. Contact
your local dealer for maintenance and repair services.
NOTICE
Improper maintenance or modifications to the design or performance of this
machine will void the warranty. ONLY use genuine AGT equipment manufacturing
replacement parts on this machine.
Safety Instructions
Obey the following safety instructions when servicing or repairing this machine.
Wear proper Personal Protective Equipment (PPE) while working on this machine, which
may include safety glasses, hard hats, steel toe boots, gloves, etc.
Wear a welding helmet when welding to protect your eyes, face and neck from flash burn,
ultra-violet radiation and heat.
Ensure all jack stands, lifts and hoists are in good working condition and have the rated
load capacity to support the load.
If servicing is performed while the brush cutter is attached to the rock bucket, turn engine
off, set parking brake and chock wheels to prevent skid steer from moving.
Only perform service work in a well-lit area.
Allow the machine to cool down before servicing this machine. Hot oils can burn your
skin.

https://www.agrotkindustrial.com/
sales@agrotkindustrial.com
10
Handling safety
Storage Tips
To get years of quality use out of your rock bucket, follow these storage tips:
Ensure rock bucket is free of debris, dirt, grime
and grease.
Store your rock bucket in a dry shed or garage.
When storing your rock bucket for the season,
cover with a weather proof tarp to protect it from the
elements.

https://www.agrotkindustrial.com/
sales@agrotkindustrial.com
11
Handling safety
OSHA 1910.266 Appendix A - First-aid Kits
Source:
http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=STANDARDS&p_id=9863.
Accessed: 16 Dec 09
The first-aid kit information below was directly obtained from OSHA regulations. Having a kit
available at the job site is required by OSHA for logging operations and is highly recommended by
AGT Manufacturing.
The following list lists the minimum number and type of first aid supplies acceptable
for first aid kits as required under the SOP. The contents of the first-aid kit listed should
be adequate for small work sites, consisting of approximately two to three employees.
When larger operations or multiple operations are being conducted at the same location,
additional first-aid kits should be provided at the work site or additional quantities of
supplies should be included in the first-aid kits:
1. Gauze pads (at least 4 x 4 inches).
2. Two large gauze pads (at least 8 x 10 inches).
3. Box adhesive bandages (band-aids).
4. One package gauze roller bandage at least 2 inches wide.
5. Two triangular bandages.
6. Wound cleaning agent such as sealed moistened towelettes.
7. Scissors.
8. At least one blanket.
9. Tweezers.
10. Adhesive tape.
11. Latex gloves.
12. Equipment such as resuscitation bag, airway, or pocket mask.
13. Two elastic wraps.
14. Splint.
15. Directions for requesting emergency assistance.

https://www.agrotkindustrial.com/
sales@agrotkindustrial.com
12
Handling safety
Inspection Checklist
This checklist is to be completed prior to every use of the rock bucket. DO NOT use a rock
bucket that fails inspection until it has been repaired.
Check for damaged hoses or hydraulic leaks. See hydraulic safety precautions in this manual.
Check for cracked welds.
Check for bent or damaged components.
Check for damaged cylinder pins.
Check for missing or loose fasteners (bolts, nuts, snap rings, etc.)
Inspector Name Date
* * * IMPORTANT * * *
If you are using your Skid Steer Rock Picker Bucket as part of a commercial operation it is
HIGHLY recommended that you keep a copy of all inspections performed on the machine and
the Skid Steer Rock Picker Bucket. Also maintain records of repairs that are performed as a
result of failed inspections. OSHA inspectors will likely ask for proof that you are taking steps
to mitigate risks and to comply with OSHA regulations. Refer to www.osha.gov on the Internet
and search for "1910.266" to display regulations specific to logging operations.
Handling safety

https://www.agrotkindustrial.com/
sales@agrotkindustrial.com
13
Safely Checking for Hydraulic Leaks
WARNING:
There is significant risk of injection from the high pressure spray at hydraulic leaks
The tremendous energy used to operate the machine and attachments can be stored in
the hydraulic system even when the machine engine is off.
Very serious injuries from hydraulic fluid injection can seem insignificant at first. Often it
can seem
like a pin prick or tingling, but later it may require amputation. HIGH PRESSURE LEAKS
ARE
OFTEN INVISIBLE.
Hydraulic system injuries can include:
Burns from hot fluid
Injection of hydraulic fluid
Trauma from energized components or flailing lines
DO
Always Lock Out Tag Out machine
controls before working on the machine or
attachment.
Always use the methods recommended
by the manufacturer to block loader arms and
other moving components to prevent
accidental movement.
Always use appropriate PPE (Personal
Protective Equipment) when working
on/around machinery.
Take an approved safety course related
to hydraulic systems. Local university
extension programs and equipment dealers
will offer training on hydraulic safety.
DO NOT
DO NOT use your hands, or other body
parts,
to inspect for hydraulic leaks.
DO NOT position yourself in pinch points
when the
machine has not been properly blocked,
locked out
and tagged out.
DO NOT "crack" a hydraulic fifi tting to
release
hydraulic pressure. Severe risk of injection.
DO NOT tighten or loosen hydraulic
components
when the system is pressurized.
DO NOT assume that the system is
depressurized.

https://www.agrotkindustrial.com/
sales@agrotkindustrial.com
14
Limited Warranty
The goal of agrotkindustrial.(“AGT”) warranty policy is to assure confidence, reduce
downtime and minimize cost of ownership. Should you want to verify warranty, or should
potential issues arise,please contact your authorized dealer or AGT’s Customer Service
Team at service@agrotkindustrial.com, +1 913-244-6269 and we will strive to resolve any
issues in a timely manner.
AGT Attachments (“AGT”) offers a Limited Warranty on Shear, Grapple, and Puller
Attachments delivered hereunder against faulty workmanship and use of defective materials
for a period of twenty four (24) months from the date of shipment to the original purchaser
from USA and/or USA Authorized Dealers. AGT offers a Limited Warranty on Saw
Attachments against faulty design, material, and workmanship for normal use when properly
maintained for a period of twelve (12) months from date of shipment. The Warranty for all
products listed above and delivered hereunder to Rental users is for a period of six (6)
months from the date of shipment to the original purchaser. Seller offers a Limited
Warranty for miscellaneous parts and accessories such as cylinders, hoses, switches, valves
and wiring delivered hereunder against faulty workmanship and use of defective materials for
a period of three (3) months from the date of shipment. This warranty does not include, and
there in hereby excludes, maintenance parts and consumables including but not limited to
hydraulic fluid, oil, belts, teeth, blades, filters and other similar items.
AGT offers a Limited Warranty on Auger Attachments against faulty design, material, and
workmanship for normal use when properly maintained.
Auger Gearboxes are warranted for a period of sixty (60) months from date of shipment,
Auger Motors are warranted for twenty four (24) months from date of shipment.Auger Bits,
Frames and Cradles are warranted for a period of twelve (12) months from date of
shipment.Refer to the Product Manual for proper maintenance procedures.Spare,
Replacement and After Warranty Parts including hoses and components are warranted for
three (3) months. AGT Auger Teeth, Pilots, Adaptors and Extensions are manufactured with a
patented design to interface with AGT Auger attachments extensions and adaptors.The use
of attachments other than AGT Auger Teeth, Pilots, attachments, extensions and/or adaptors,
will void all warranty on Auger Drive and Bits.The use of AGT adaptors on unapproved
attachments is not sanctioned.A “home-made”or non-standard attachment outside the
specifications for the machine will void the warranty.

https://www.agrotkindustrial.com/
sales@agrotkindustrial.com
15
This manual suits for next models
1
Table of contents
Other AGT INDUSTRIAL Farm Equipment manuals
Popular Farm Equipment manuals by other brands

Schaffert
Schaffert Rebounder Mounting instructions

Stocks AG
Stocks AG Fan Jet Pro Plus 65 Original Operating Manual and parts list

Cumberland
Cumberland Integra Feed-Link Installation and operation manual

BROWN
BROWN BDHP-1250 Owner's/operator's manual

Molon
Molon BCS operating instructions

Vaderstad
Vaderstad Rapid Series instructions