AiAiAi H10 User manual
elp · Product manuals
10 headband product manual
General
Power on: Push middle button (3 sec)
Power off: Push middle button (3 sec)
Change Wireless mode: Slide switch (White: W
+
Link, Blue: Bluetooth)
Enter pairing mode: Push top and bottom button (3 sec)
ard reset: Push and hold middle button (7 sec)
Playback controls
Play/pause: Push middle button (single press)
Next track: Push middle button (double press)
Previous track: Push middle button (triple press)
Volume up: Push top button
Volume down: Push bottom button
Call/Assistant (Bluetooth mode only)
Answer incoming call: Push middle button (single press)
End current call: Push middle button (single press)
Reject incoming call: Push and hold middle button (1.5 sec)
Activate assistant: Push top and bottom button (1.5 sec)
LED indicator for W
+
Link mode:
Connected: Static white
Idle (not connected): Blinking white
(1s off, 1s on)
Idle (battery level below 10
%
): Blinking red (1s off, 1s on)
Charging (0-50
%
): Blinking red (1s off, 1s on)
Menu Log in Cart
0
Charging (51-99
%
): Blinking green (1s off, 1s on)
Charging complete (100
%
): Static green
Pairing mode: Fast blinking white (300ms off, 300ms on)
LED indicator for Bluetooth mode:
Connected: Static blue
Idle (not connected): Blinking blue (1s off, 1s on)
Idle (battery level below 10
%
): Blinking red (1s off, 1s on))
Charging (0-50
%
): Blinking red (1s off, 1s on)
Charging (51-99
%
): Blinking green (1s off, 1s on)
Charging complete (100
%
): Static green
Pairing mode: Fast blinking blue (300ms off, 300ms on)
ow do I firmware update the 10 headband?
What is the warranty for Remixed products?
Can I trade-in any type of AIAIAI product?
ow can I return a product to trade-in?
ow do I firmware update the S10 speaker units?
Related questions
Related products
Menu Log in Cart
0
Other AiAiAi Headphones manuals
