AICKSN MA1-A400 User manual

USER MANUAL
U.S. AICKSN Technology Co.,Ltd.
Address:250 w clifton st tampa,FL.33614
Fujian Aicksn Environmental Technology Co., Ltd.
F4, No. 5, Fangshan South Road, Xiang'an Dist.,
Xiamen, Fujian, China
Tel:[phone]
0086 0592-5569172
www.aicksn.com
[email protected]
(AICKSN Large Flow Water Filtration Systems )
(MA 400 Standard System)

(MA 400 Standard System）
Introduction
System Includes
Products Specifications
Installation Requirements
Installation Tools
Main Components
Installation Steps
Special Notes
Warranty
1
1
2
2
3
3-7
7
7-8
9
Contents

Welcome to use AICKSN commercial large flow filtration systems. Users must
strictly follow the installation specifications explained in this User Manual and all
installation or maintenance should be performed by professional staff. Any
economic and legal responsibilities for all property losses caused by failure in
accordance with the instructions would be not within the warranty.
AICKSN commercial large flow filtration systems is a water filtration solution
developed for commercial catering applications, as well as commercial occasions
with large flow water demand. The filtration systems could quickly and efficiently
provide safe and high quality filtering water in a short time, meeting the demand
for drinking water in small commercial places, and provide customers with a better
water experience.
Notes:
1.The MOSO filtration systems requires to use municipal tap water or other
centralized water supply.
2. Outlet water should be released for 10-15minutes to keep water quality when
the systems stops working for long time (generally not more than one week,
shorter in summer time).
3. When the systems is working, please ensure that every inlet and outlet pipes are
unblocked.
4. The filtration systems is only suitable for room temperature water. Do not install
the product on the hot water pipe, and ensure that there is no heat source around.
4 Regularly check the filtration systems and water pipe accessories to avoid water
leakage.
5.For maintenance or replacement, you need to use the components provided by
AICKSN. Problems caused by non -authorized components are not within the
warranty.
Introduction System Includes
12
MA1-A400
1 Stage Manifold 1set
Packing Kit 1set including:
1/2” Connector 2pcs
Red Buckle 2pcs
ACF Filter 20” 1pc
MA2-2A400 MA4-4A400MA3-3A400
Silicone Oil 1 pack
Straight Valve 1pc
User Manual 1pc
2 Stages Manifold 1set
Packing Kit 1set including:
1/2” Connector 2pcs
Red Buckle 2pcs
ACF Filter 20” 1pc
Silicone Oil 1 pack
Straight Valve 1pc
User Manual 1pc
3 Stages Manifold 1set
Packing Kit 1set including:
3/4” Connector 2pcs
Red Buckle 2pcs
ACF Filter 20” 3pcs
Silicone Oil 1 pack
Straight Valve 1pc
User Manual 1pc
4 Stages Manifold 1set
Packing Kit 1set including:
3/4” Connector 2pcs
Red Buckle 2pcs
ACF Filter 20” 4pcs
Silicone Oil 1 pack
Straight Valve 1pc
User Manual 1pc
Product Specification
Product Specification
Water Inlet Pressure
Water Inlet Requirement
Water Inlet Temperature
Water Inlet
Water Outlet
Rated Flow
Rated Capacity
ACF Filter Service Life
Dimension
Net Weight
0.15-0.4Mpa
Municipal Water
5-45℃
1/2”
1/2”
10L/M
15,800G/60,000L
8-12 months
20x13x62cm
4Kgs
0.15-0.4Mpa
Municipal Water
5-45℃
1/2”
1/2”
20L/M
31,600G/120,000L
8-12 months
32x13x62cm
5.2Kgs
0.15-0.4Mpa
Municipal Water
5-45℃
3/4”
3/4”
30L/M
47,400G/180,000L
8-12 months
43x13x62cm
7Kgs
0.15-0.4Mpa
Municipal Water
5-45℃
3/4”
3/4”
40L/M
63,200G/240,000L
8-12 months
56x13x62cm
9Kgs
MA2-2A400MA2-2A400 MA3-3A400 MA3-3A400

1. Please reserve the installation location for the filtration system and the neces-
sary operation and maintenance space around it.
2. The quality of the incoming water must comply with the municipal tap water.
The temperature of the incoming water must be controlled between 5 and 38°C.
Temperature too low or too high may cause damage to the filtration system and
affect its life.
3. Use a pressure gauge to measure the tap water pressure (the suitable range is
0.1MPa~0.4MPa), and confirm whether the pressure of the installation site meets
the specified pressure range. If the pressure is lower or higher than the specified
pressure, a booster pump or a pressure reducing valve needs to be installed to
ensure safe operation. Shut off the main water supply switch before installation.
4. All new filtration system, or new cartridge should be flushed for 10 minutes.
During this process, the drained water cannot be used, and you should observe
whether there is water leakage or seepage in the whole filtration system. If so, you
need to shut off the water, and carry out the filtration system to do the inspection.
The flushing needs to be continued after operation is normal.
1.Wrench
2.Thread Seal Tape
3.Electric drill (10mm drill bit)
4.Hammer
5.Phillips Screwdriver
6.Knife
Installation Requirements
Installation Tools Needed
34
MA1-A400
Main Components
1 2 3
4 5 6
1.1 Stage Manifold 1set
2.ACF Filter 20” 1pc
3.1/2” Connector 2pcs
4.Red Buckle 2pcs
5.Silicone Oil 1 pack
6.Straight Valve 1pc

6
5
MA2-2A400
Main Components
12 3
4 5
MA3-3A400
Main Components
12
3 4 5
1.2 Stages Manifold 1set
2.ACF Filter 20” 2pcs
3.1/2” Connector 2pcs
4.Red Buckle 2pcs
5.Silicone Oil 1 pack
6.Straight Valve 1pc
1.3 Stages Manifold 1set
2.ACF Filter 20” 3pcs
3.3/4” Connector 2pcs
4.Red Buckle 2pcs
5.Silicone Oil 1 pack
6.Straight Valve 1pc
66

1. After open the carton, handle out components with care to avoid hitting the
pressure gauge.
2. Apply silicone oil to the connection position on top of cartridge, and then screw
it into the manifold.
3. Use a 6mm drill bit to drill a hole on the wall, then knock in the expansion screw,
and screw the system screws. The position of the nut should be kept about 5mm
away from the wall.
5. Hang up the filtration system.
6. Finally, connect the water inlet and outlet with 1/2” or 3/4”connector, and use
pipes to connect to the equipment.
Please read the "User Manual" repeatedly before using this filtration system, and
strictly follow the requirements in the manual for installation, use and mainte-
nance. If the user fails to install, use and maintain as required and cause an
accident, our company will not bear any responsibility for this.
1. The main connecting parts of this machine are plastic products. The user must
always observe its integrity during use to ensure safe use. When the user goes out
for a long time or does not use the machine, be sure to close the water inlet valve,
disconnect the power supply, and discharge all the pure water from the pressure
tank.
2. The machine should not be placed in an excessively humid place, otherwise it
will cause spots on some metal parts of the machine.
3. The recommended replacement cycle of various filter elements in this machine
is calculated by referring to the average index of tap water in the scope of use that
meets the national standard. If the water quality at the user's actual use differs
greatly from the average index, there will be a significant difference between the
actual use state and the estimated period (such as premature clogging of the filter
87
MA4-4A400
Main Components Installation Steps
Special Notes
12
3 4 5
1.4 Stages Manifold 1set
2.ACF Filter 20” 4pcs
3.3/4” Connector 2pcs
4.Red Buckle 2pcs
5.Silicone Oil 1 pack
6.Straight Valve 1pc
6

element, premature failure, etc.). At this time, filter elements replace should be
based on the actual use state.
4. The estimation of the life cycle is based on ordinary household water. Users with
a large water consumption such as units will quickly reach the total water intake.
Please replace the filter as soon as possible.
1. The warranty period starts from the date of issuing the invoice.
2.Warranty period: The whole machine is guaranteed for five years, the consum-
ables are not within the scope of the warranty.
3. Please keep the warranty card properly. The warranty requires the purchase
invoice and warranty card to take effect.
4. If there is no invoice, the machine number is altered, the user disassembles and
replaces the machine by himself, or the operation is not in accordance with the
instructions, all these man-made damages are not covered by the warranty.
5. If your machine appears abnormal, please unplug it immediately, turn off the
water source and contact with us at www.aicksn.com or email your request to
[email protected]
9 10
Special Notes
Warranty