AIGURD F22 User manual

F22
AIGURD Fingerprint Smart Door Lock
User Manual
AIGURD

Product Introduction................................................................01
Installation Guide....................................................................04
Operation Introduction.............................................................11
Software..................................................................................17
Routine maintenance..............................................................19
Warranty..................................................................................20
Contact....................................................................................21
Contents

come true.The lockmakes operations based on visual menu
01
Thank you for choosing this fingerprint touchscreen door lock
No more worries about losing keys,you just need one touch to
unlock.This lock adopts a live semiconductor sensor and has
360 degree fingerprint recognition,which allows easy and fast
fingerprint entry
.The lock is equipped with OLED displa
y,it
’s
software allows lock owner to copy and recover the user data
and track the entry record.Double verification features increase
lock security level significantly.Enjoy the latest biomeric
fingerprint technologies that will bring you a convenient and
secure lock system.
Reset
Reset
Dot faces
the Arrow
Left
Key board
Cancel
Oled screen
Mechanical
keyhole
Up/Increase
Down/Reduce
Enter
Fingerprint
Sensor
Micro USB
charging port
Right

1.Features
UP to 200 user IDs could be registered to the lock and both finger
-print and code unlocking ways are available for each ID.
Administrator:who has the highest privilege in the locking system,
can not only unlock but also set up the lock.10 IDs maximum(ID
range:0001-0010).
Normal user:who can only unlock the lock but has no authorization
to set up the lock.140 IDs maximum(ID range:0011-0150).
Guest user:who can only unlock the door within the permitted time
period,50 IDs maximum(ID range:0151-0200).this function is speci-
ally designed for babysitters,hourempolyees,etc
Password protection:Add same quantity of 1-6 digits before and
after the real password,you can still open the lock,highly advanced
anti-peep function
Double ID combination mode to open:user A’s fingerprint+user B’
s fingerprint,user A’s password+user B’s password,user A’s finge
rprint+user B’s password,there must be 2 user IDs involved in the
unlocking process
Open mode:once you activate this function,anyone could open the
door by pushing down the handle without finger or password
verification,convenient for offices’clubs’shops’ working hours
Software Assistant:You can copy lock A’s user data to lock B via
this lock assistant, admins can also check out 10000 entry records
Low power alert:If the battery voltage is below 4.6V,after you open
the lock,a red light will blink and an alarm will ring as well.
2.Specification
Stainless steel 304 for the whole lock body,which is anti-rust
and anti-fading for 10 years
Semiconductor sensor and 360 degree fingerprint recognition
Anti-fake fingerprint technology ＆leaf core opening design,
ensuring a high security level.
Precision copper gear transmission design,ensuring a long
lifetime(600,000 times)
USA Tl code chip,preventing high-frequency pulse unlocking.
Single latch---American standard
Fitting door thickness between 1 1/5” and 2 2/5”(30-60mm)
Operation temperature from -4 F to 140 F
Powered by 4 AA Alkaline batteries(NOT included)
o o
02

Outside Chassis
F22
AIGURD
Note:Please make sure that all accessories are in the package
before installation.
Inside Chassis Base Mounting Plate Square Spindle
Mechanical Keys Door Latch USB Cable Strike Plate
Connection Rod Screw M4x12 Screw M4x30 Screw M4x20
Strike Box AIGURD Manual
Drill Holes Template

Screw M3x8
Battery
compartment cover
Inside Chassis
Screw M4x30 Base Mounting Plate
Connection Rod
Outside Chassisl
Screw M4x12
Screw M4x20 latch
Spindle

a.Drill holes according to the paper
guide inside lock package.
b.Insert the lock latch into the door.
c.Install the square iron stick & outside lock housing
d.install the inside lock housing
a.Insert the lock latch into the door and tighten up with 2pcs screws M4x20.
b.Install the strike plate and fix it with 2pcs self-tapping screws.
:The latch should face to the outside deadbolt.
:2 fixed screws in line should be parallel to the door edge.
:The previous strike plate must be removed
Strike Plate
Lock latch
60-70mm

a.Insert the square iron stick across the latch, if the door thickness is less
than 2 , the spring side should face the inside housing.(Note: If the door
thickness is over 2 , the spring side should face the opposite direction.).
b.Tighten up the 3pcs connection rods to the outside housing unit and make
the two arrowheads face each other.

c.Insert the square iron stick smoothly across the latch.Make sure the stick
edge slides into the hole on the outside handle.Get the wire on the handle
across the space.
a.Pass the wire through the rectangular hole on the base mounting plate
and then fix the plate on the door with 3pcs M4x30.

b.Connect the wire to battery.
c.Insert the square iron stick into the inside handle. Please arrange the
wire in empty space and make sure the wire is fixed.
d. Install the inside housing onto the mounting plate and fasten it with
4pcs M4*12 screws

a.Install 4 new AA Alkaline batteries
b.Slide the battery cover down and then tighten up with the screw
c. Never mix new batteries with used batteries.
a.You should be able to push down and lift up the handle.
b.You should be able to unlock the lock with mechanical keys.
c.You should be able to add users and program the lock by following
the operation instruction.
Note:You can contact our after-sales service for the installation video.

a.Administrator: who has the highest privilege in the locking system,can not only
unlock but also set up the lock. 10 IDs maximum ( ID range: 0001-0010).
b.Normal user: who can only unlock the lock but has no authorization to set up the lock.
140 IDs maximum ( ID range: 0011-0150).
c.Guest user: Who can only unlock the door within the permitted time period,
50 IDs maximum (ID range: 0151-0200).
d. Each ID can be registered with either fingerprint or password,or both.
e.Back to Factory default:under this condition, the lock can be unlocked by any fingerprint.
f.At least one Administrator should be registered for the first time use.
Enroll Master
Enroll User
Enroll Guest
Modify FP
Modify PW
Schedule
Del Master
Del User
Del AllUsers
Unlock Log
User lnfo
Language
Open mode
Combine Mode
Sound Setup
Date Setup
Time Setup
System lnit
Enroll User Modify User Delete User
Record Check
System Setup
Data Transfer
System menu

Factory default
Active the lock by
touching the screen
User Empty Enroll
Master
enter
With Master code
Active the lock by
touching the screen
enter
Verify Master
Verify OK
Master
ID 0001
4 8 enter
Enroll 3 times press
properly
Press FP #1
Press FP #2
Press FP #3
FP Enroll OK
Press to log the 6-8
password if you only
need the password
Input PW #1
Input PW #2
PW Enroll OK
Press If you only
need the fingerprint
System Menu
Modify User
Delete User
Record Check
System Setup
Date Transfer
Enroll User
4 8 enter
Enroll User
Enroll User
Enroll Guest
Enroll Master
4 8 enter
Master
ID 0002
4 8 enter
Enroll 3 times
press properly
Press FP #1
Press FP #2
Press FP #3
FP Enroll OK
Press
to log the
6-8 password if you
only need the
password
Input PW #1
Input PW #2
PW Enroll OK
Press If you only
need the fingerprint
Active the lock by
touching the screen
enter
Verify Master
Verify OK
System Menu
Enroll User
Modify User
Delete User
Record Check
System Setup
Date Transfer
Enroll User
enter4 8
4 8 enter
Enroll User
Enroll Master
Enroll Guest
Enroll User
4 8 enter
User
ID 0011
Enroll 3 times press
properly
Press FP #1
Press FP #2
Press FP #3
FP Enroll OK
Press to log the
6-8 password if you
only need the
password
Input PW #1
Input PW #2
PW Enroll OK
Press If you only
need the fingerprint
enter
Active the lock by
touching the screen
Verify Master
Verify OK
System Menu
Enroll User
Modify User
Delete User
Record Check
System Setup
Date Transfer
Enroll User
4 8 enter
Enroll User
Enroll Master
Enroll Guest
Enroll User
Enroll Guest
enter4 8
enter4 8
Guest
ID 0151
Schedule
Frm mm-dd-yyyy
To mm-dd-yyyy
4 86 7
enter
00:00-23:59
00:00-00:00
00:00-00:00
6 7 4 8
enter
Enroll 3 times press
properly
Press FP #1
Press FP #2
Press FP #3
FP Enroll OK
Press to log the
6-8 password if you
only need the
password
Input PW #1
Input PW #2
PW Enroll OK
If you only
need the fingerprint
Press

Active the lock by
touching the screen
enter
Verify Master
Verify OK
System Menu
Enroll User
Delete User
Record Check
System Setup
Date Transfer
Modify User
4 8 enter
Modify User
Modify PW
Schedule
Modify FP
4 8 enter
ID 0001
4 8 enter
Enroll 3 times press
properly
Press FP #1
Press FP #2
Press FP #3
Confirm Modify?
enter
FP Modify OK
Active the lock by
touching the screen
enter
Verify Master
Verify OK
Menu Enroll
User Modify
User Delete
User Record
Check System
Setup Date
Transfer
System
4 8 enter
enter4 8
Modify User
Modify FP
Schedule
Modify PW
enter
4 8
ID 0001
Input PW #1
Input PW #2
Confirm Modify?
enter
PW Modify OK
Active the lock by
touching the screen
enter
Verify Master
Verify OK
enter4 8
Menu Enroll
User Modify
User Delete
User Record
Check
System
Setup Date
Transfer
System
User
Modify FP
Modify PW
Schedule
Modify
4 8 enter
ID 0151
4 8 enter
Schedule
Frm mm-dd-yyyy
To mm-dd-yyyy
4 876
enter
6 7 4 8
enter
00:00-23:59
00:00-00:00
00:00-00:00
Schedule Modify OK

Active the lock by
touching the screen
enter
Verify Master
Verify OK
System Menu
Enroll User
Modify User
Record Check
System Setup
Date Transfer
Delete User
4 8 enter
Delete User
Del User
Del All Users
Del Master
4 8 enter
enter4 8
Master
ID 0002
The first master ID
is unable
to be deleted at
this mode
Confirm Del?
enter
Delete OK
Confirm Del?
enter
Delete OK
Active the lock by
touching the screen
enter
Verify Master
Verify OK
System Menu
Enroll User
Modify User
Record Check
System Setup
Date Transfer
Delete User
4 8 enter
Delete User
Del Master
Del All Users
Del User
4 8 enter
Master
ID 0011
4 8 enter
Confirm Del?
enter
Delete OK
Delete User
Del Master
Del User
Del All Users
4 8 enter
System Menu
Enroll User
Modify User
Record Check
System Setup
Date Transfer
Delete User
Active the lock by
touching the screen
enter
Verify Master
Verify OK
4 8 enter

Active the lock by
touching the screen
enter
Verify Master
Verify OK
Active the lock by
touching the screen
enter
Verify Master
Verify OK
System Menu
Enroll User
Modify User
Record Check
Date Transfer
Delete User
System Setup
System Menu
Enroll User
Modify User
Record Check
Date Transfer
Delete User
System Setup
4 enter 848 enter
System Setup
Language
Open mode
Combine Mode,
Sound Setup
Time Setup
System Init
Date Setup
System Setup
Language
Open mode
Combine Mode,
Sound Setup
System Init
Date Setup
Time Setup
4 8 enter4 8enter
Date Setup
Month-Day-Year
00-00-0000
Time Setup
Hour Minute
00-00
4 48 8
enter enter
6 67 7
Date Modify OK Time Modify OK

Active the lock by
touching the screen
enter
Verify Master
Verify OK
Active the lock by
touching the screen
enter
Verify Master
Verify OK
System Menu
Enroll User
Modify User
Date Transfer
Delete User
System Setup
Record Check
System Menu
Enroll User
Modify User
Date Transfer
Delete User
System Setup
Record Check
4 8 enter 8
88
4
44
enter
enter enter
Record Check
User check
Record Check
Unlock check
Unlock check
User check
4 8 Exit 4 8 Exit
When the lock is in the open mode, anybody could open the door by pushing down
the handle.
How to set the open mode:Login to the system, go to the menu page,press to
confirm or unlock the lock by the administrator, then press and at the same time
for 3s to 5s. How to disable the open mode: .Activate panel,press for 5s.
Combine Mode exists for the high-security needs.
Enable and disable the combine mode: login to the system, go to the menu page,
press to confirm;
When using this mode, the lock has to be unlocked by 2 IDs (fingerprint + finger-
print, fingerprint + code, code + code ); Any combinations of 2 administrator IDs
(fingerprint + fingerprint, fingerprint + code, code + code ) can login to the system.

Login to the system, go to the menu page, press to turn on or turn off the key
sound or prompt sound.
Login to the system, go to the menu page, press to confirm.
You can reset the system to manufacture default by using this function and all user IDs
will be removed after resetting.
Insert a key in the cylinder and rotate 180° counter-clockwise, push down the handle to
unlock and then rotate a key 180° clockwise to take out the key.
If the battery voltage is below 4.6V, when a user has opened the lock, a red light
will blink and the alarm will ring, reminding the user to change the batteries.
When power runs out, users can power up the system by connecting a power bank via
the included USB cable.
If you can’t login the system, the system can be reset to the factory default by pressing
the reset button. To reset the system, press the reset button until you hear a long beep.
The reset button is located on the outside handle.
Note: You can contact our after-sales service for the programming video.

Backup and Recover User Data Under Normal Mode
a.Connect the lock to the computer through the USB cable(included).
b.Login to the lock system and go to the data transfer function and then open the lock
software on the computer.
c.To back up the user data, click "User Backup" and select the user data to save the file.
The user data will be transferred to the computer.
d.To recover the user data, click "User Recovery" and select the saved user file on the
computer. The user data will be transferred to the lock.
：Any user data in the lock will be overwritten by the recovered data!
With the “lock Assistant” software, you can set up the lock, manage the user data or unlock
records.
a.Setting

a1. Firmware Version: You can check the firmware version in the lock, and update the
firmware version.
a2. Time Set: You can customize the lock time or sync the lock time with the computer time
b.Download