Igloohome Deadbolt 2S Metal Grey Installation and maintenance instructions

1
Installers &
User guide
Deadbolt 2S
Metal Grey.
Version 0.1 05/19

As our igloohome app is frequently updated, there may be changes to this manual.
Please refer to our website igloohome.co/support for the latest version of the manual.
Welcome!
This guide will get you up and running with your igloohome
Deadbolt 2S Metal Grey. In the meantime, you should follow
igloohome on Facebook and Youtube!
Visit our YoutubeLike us on Facebook

Table of Contents
What’s Included 4
Specifications 5
Installation Guide
Requirements 6
Prepare Door for Installation 7
Prepare Lock for Installation 9
Installation Instructions 10
Test Lock 16
Prepare the Door Frame 17
User Guide
Lock Anatomy 18
Features 19
Unlocking and Locking 21
App Onboarding 22
Managing Access in App 23
Lock Behaviour 24
9V Jumpstart 26
Airbnb Connect 27
Audio and LED Indications 28
Troubleshooting 29

4
What’s Included
Front Assembly
& Rubber Gasket
Back Assembly
Rubber Gasket
Back Assembly
AA Alkaline Batteries x4
Bolt Assembly
Keys x5
Screw Holder
Back Plate
Strike Plate Housing &
Strike Plate
Drill Sheet 43mm (1.69”)
Bolt Screw x3
5mm (0.019”)
Bolt Screw x2
15mm (0.59”)
Wood Screw x4
8mm (0.03”)
Bolt Screw x2
20mm (0.78”)
Bolt Screw
Door Sensor & Magnet
Edge of the door Face of the door
Fold this line
60mm (2-3/8”) backset
70mm (2-3/4”) backset
Centerline
10mm (Optional)
54mm
Door Thickness
Drillfor:
Drillfor:
35mm (1-3/8”)
Drillfor:
45mm (1-3/4”)
Drillfor:
60mm (2-3/8”)
Drillfor:
70mm (2-3/4”) backset60mm (2-3/8”) backset
Drillfor: Drill for:
Drill a25mm (1”)hole atthe center
of door edge based onyour
DoorThickness measurements
25mm
Drill Sheet
Version 0.2 03/18

5
Specifications
Model igloohome Smart Deadbolt 2S Metal Grey
Battery Type 4 x AA* Alkaline
Battery Life Up to 1 Year
Emergency Power 9V Alkaline Battery
Operation Temp -20°C to 50°C
Storage Temp -30°C to 60°C
IP Rating IP65
Material AI, Zinc Alloy, ABS
Weight Net: 450g, Gross: 550g
Unlock Mechanism Bluetooth, PIN code, Physical Keys, Thumbturn
Front BackSide
145mm (5.70”)
60mm (2.36”) 11mm (0.43”) 30mm (1.18”) 65mm (2.55”)
160mm (6.29”)
* DO NOT USE: Heavy Duty, Eveready, GP, or rechargeable batteries. Please note that using recommended
battery brands such as Panasonic, Duracell, or Energizer will improve the performance and lifespan of the lock.

6
Installation Guide
145mm (5.70”)
160mm (6.29”)
Requirements
Measurements
35mm (1.37”) to 60mm (2.36”)
10mm (0.39”)
20mm (0.78”)
>110mm (4.33”) for 60mm (2.36”) / >120mm (4.72”) for 70mm (2.75”) backset
50mm (1.96”)
a
b
c
d
e
a
bb
b
c
e
d
Clearance
Door Thickness

7
Please ensure that there is an existing handle on your door for push - pull access.
Not for: metal gates, glass doors or sliding doors.
If you are unsure if your door is suitable, send us web links to your door pictures to [e-mail]
Prepare Door for Installation
Items needed:
Recommended
Door and door frame material : Wood
Recommended
Gap between door and door frame: <3mm (0.01”)
DrillDrill Sheet 10mm (0.39”)
Drill Bit
54mm (2.12”)
Hole Saw
25mm (0.98”)
Spade Bit
#2 Phillips Screw Driver 20mm (0.78”)
Chisel
Hammer

8
How to use the Drill Sheet
Mark the center of the holes and then drill for accuracy.
Drilling (Door)
Make sure this is
aligned to the centre
of door edge
Door edge
Fold here
before drilling
holes for side
Chiselling
Put the bolt tongue in &
chisel around the edge
54mm (2.12”)
Hole Saw
10mm (0.39“)
Drill Bit
54mm (2.12”) 54mm (2.12”)
Deep
57mm
(2.25”)
25mm (0.98”)
25mm (0.98”)
Spade Bit
20mm
(0.78”)
Chisel
20mm (0.78”)
Chisel

9
Prepare Lock For Installation
Set Back Assembly for Left / Right Hand Installation
Remove Battery Cover from the Back Assembly
Press the button on the
top of the battery cover,
and pull outwards.
Set the toggle to ‘RH’ for
right-hand installation
Right Hand Installation
Set the toggle to ‘LH’ for
left-hand installation
* Hinge is on your left.
* Hinge is on your right.
Left Hand Installation
Top View of Battery Cover
Hinge
Outside
Outside
Hinge

10
Installation Instructions
Measure
If you are replacing your current deadbolt lock, industry standards are 60mm (2.36”) or 70mm
(2.75”) backset. To determine which backset length you should use, so measure the distance (x)
between the center of 54mm (2.12”) hole to door edge.
Prepare bolt assembly based on the distance (x)
Bolt ships with bolt assembly in 60mm (2.36”) position. If required, twist the bolt and pull to
extend (simultaneously) to 70mm (2.75”) backset position.
Twist upwards
Pull
Twist downwards
to lock backset position
X
54mm
(2.12”)
Hole

11
Insert bolt and front assembly into door edge
The ‘+ ‘ hole on the backset should be in the middle of the hole.
Screw Holder
Screws
15mm (0.59”)
Measure and cut the tailpiece if necessary
After inserting the tailpiece, measure the distance of protrusion from the door.
c
c
Please ensure that tailpiece is in vertical position.
Door thickness (mm) No. of notch to cut
60 0
55 1
45 2
40 3
35 4
Notch The recommended tailpiece protrusion
from the door is 15mm (0.6”).

12
Screws
43mm (1.69”)
Door Sensor Installation
Adjust the position of the door sensor according to the door handling (left or right hand installation).
Use the 2 x 5mm (0.19”) screws to secure the door sensor to the back plate.
Screws
5mm (0.19”)
Right-hand Installation Left-hand Installation
e
d
e
e
e
e
Secure the Front Assembly using the Back Plate.
To do this, place the Back Plate (ensuring the correct side placement).
Follow this orientation
d
d
d
5
Do not overtighten the screws

13
Right-hand Installation Left-hand Installation
Fit in the Rubber Gasket
Insert the front assembly cable through the rectangular hole on the rubber gasket.
The hole should be on the right side of the rubber gasket.
Assembly Cable
Door Sensor Cable
goes through the
arched hole on the
Rubber Gasket
6

14
Connect Assembly Cable
Connect the sensor cable to the Back Assembly then connect the assembly cable from the
Front assembly through the 54mm (2.12”) hole to the Back Assembly. Ensure that the wire
is installed properly and securely.
Fit Back Assembly to the Door Tailpiece
Ensure thumbturn position is turned to ‘unlock’ position.
Thumbturn
is in vertical
position
Thumbturn is
in horizontal
position
Door Sensor
Cable
Assembly
Cable
7
8
Right-hand Installation Left-hand Installation

15
Insert 4 AA Alkaline Batteries and push the battery case lid
inwards to close
Secure the Back Assembly
Screws
8mm (0.31”)
20mm (0.78”)
9
Do not overtighten the screws
Side View
10

16
Still experiencing issues?
Test Lock
Place hand over your lock to activate touchpad and hold ‘Unlock’ icon to lock.
Does your bolt lock?
Yes No
Congrats!
Your lock is correctly installed.
Proceed to next steps.
Bummer!
Does the bolt lock and unlock
when you turn the thumbturn?
Yes
Left-Right toggle
incorrectly set
RHLH
No
Tailpiece and/or thumbturn
incorrectly set
Troubleshoot: Try Setting the
left-right toggle on your back
assembly to the correct side.
(See Pg. 10)
Troubleshoot: Dissemble lock
and install it again.
Go to igloohome.co/support for more help

17
Prepare the Door Frame
Ensure to align the lock to the door frame
and mark it down.
Same height
Door
Frame
Mark out where the bolt tongue locks then
drill a corresponding hole on door frame.
Chisel to fit the strike plate in as well.
Mark & Drill Hole
Secure strike plate housing and strike
plate using 2x 25mm (0.98”) wood screws.
Paste the magnet opposite the door
sensor.
1mm
(0.0039”)
25mm (0.98”)
Spade Bit
20mm (0.78”)
Chisel
26mm
(1.02”)
58mm
(2.28”)
4
Door Sensor
Magnet
Door
Sensor

18
Front & Back Assembly
Touch Screen
Keypad
Unlock
Key hole Cover
(Remove cover
to access
physical key
unlock)
9V Jumpstart
Clear
Thumbturn
Multi-Function
Button
Battery Cover
Release
Battery Cover
User Guide
Lock Anatomy

19
Features
Auto Re-lock
Emergency Jump-Start
The Deadbolt 2S relocks
automatically when door is closed.
User can configure the delay or
deactivate relock if they prefer to. Do
note that function will only work when
Sensor is installed.
If battery power is drained, an
external 9 Volt battery can be used
to provide emergency power. The 2
contact points of the battery must be
aligned with the 2 contact points on
the Deadbolt 2S for 2 seconds.
Manual Locking
Hold the ‘Unlock’ button for 1 second
to manually lock the Deadbolt 2S.
Lock
Battery
Bluetooth Master Key
The igloohome Deadbolt 2S unlocks
with Bluetooth via the app.
Master PIN Code
The igloohome Deadbolt 2S unlocks
with a permanent Master PIN Code.
User PIN Code
The igloohome mobile app can
generate multiple types of User Pin
codes, e.g. One-Time, Permanent &
Duration.
PIN / Bluetooth Unlock
Bluetooth Guest Key
The igloohome mobile app can
generate and share Bluetooth keys
(based on duration with guests to
unlock the Deadbolt 2S.

20
Features
Activity Logs
Entry via PIN codes and Bluetooth Key
will be logged in the app.
Bluetooth key access logs are
updated in real-time and PIN code
access logs are updated when the
owner uses a bluetooth key or update
logs.
Keypad Security Lockout
Be assured with an additional layer
of security with the keypad lockout if
the keypad is being tampered. User
can configure number of incorrect
attempts to trigger lockout.
Keypad Disabled Mode
Masking Security Code
Disable the keypad to prevent PIN
code entry from outside via the Multi
Function Button.
Enter up to 8 digits before your PIN
Code to reduce risk of intruders
checking fingerprints.
Security / Alarms
Tamper Alarm
Passage Mode
The lock will sound if intruders try to
pry the lock from the door.
Activate Passage mode via the Multi
Function Button or turning auto relock
o via Bluetooth. Refer to Page 25.