Aiphone AI-NVP-RA User manual

- INSTRUCTIONS -
The AI-NVP-RA sub station is vandal proof, and can be used with the AI-900 system. Designed for Rescue
Assistance applications and ADA compliance, this unit features Emergency and Braille signage, a large red call
button, and "Call Placed/Call Answered" LED indicator. A remote indicator can be added for better visibility of a
station's status. The AI-NVP-RA can be flush mounted to a 3-gang box or mud ring, or surfaced mounted into the
SBX-NVP surface mount box. Tamper proof screws are provided, along with a tool for installation.
NAMES & FUNCTIONS
Vandal Proof Sub Station for AI-900 System
Optional surface mount box
SBX-NVP ADA
Americans with
Disabilities Act
WIRING DIAGRAM:
Pg. 1
Speaker
Braille signage:
“Emergency – Call For Help”
FLASHING:
CALL PLACED
STEADY:
CALL ANSWERED
PRESS
FOR HELP
EMERGENCY
Call Placed Sounder
Braille signage:
“Push Button. Tone Indicates Call Placed.”
Call Status LED Indicator
Flashing = call placed
Steady = call answered
Call Button
H
L
OFF
2 cond. shielded cable
A
B
C
BLACK
BROWN
ORANGE
Open collector output
BLUE (HOT)
WHITE (COM)
A
B
C
AI-900RS
-+
relay +24VDC
GND
BLUE
WHITE
diode
“Call Placed” Tone
Volume Control
H = Loud tone
L = Standard tone
Off = No tone
AIPHONE

SPECIFICATIONS:
Power Source: Supplied by Main Frame
Speaker: 20 ohms, 3" diameter, water proof and puncture resistant, 2.5 oz. ceramic magnet
Call Button: Single pole, single throw (SPST), normally open (N/O)
Faceplate: 11 gauge carbon steel with powder-coated white baked epoxy finish
Call Annunciation: Pressing call button at sub calls assigned AI-MS900 master station
Communication: Hands free at sub. Master is push-to-talk or VOX handset.
Open Collector Output: 24V DC, 30mA
Mounting Hardware: Tamper proof screws
Terminations: Color-coded pre-wired pigtails
Wiring: 2-conductor, shielded wire is homerun to AI-900RS card, shield is used as 3rd conductor
Shielded wire is required.
Use Aiphone series wire 822202, or 821802
Wiring Distance: 2,625' with 22 AWG; 4,265' with 18 AWG.
Dimensions (H x W x D): AI-NVP-RA alone: 7-1/2" x 5-1/2" x 2". With SBX-NVP: 8-5/8" x 6-5/8" x 2-1/4"
Pg. 2
AI-NVP-RA Instr.
1105PHJS
OPERATION:
1. When a sub station places a call, the "Call Placed/Call Answered" LED on the sub station
will flash, and a repetitive tone will be heard.
2. When the call is answered, the "Call Placed/Call Answered" LED on the sub station
changes states from flashing to steady. The repetitive tone stops.
3. When the master station terminates the call, the “Call Placed/Call Answered” LED will
extinguish.
4. The open collector output will provide a closure when a call has been placed and remain
closed until the call is terminated.
BRAILLE SIGNAGE:
The AI-NVP-RA is equipped with Braille signage for the visually impaired.
ON TOP OF UNIT:
EMERGENCY
"EMERGENCY - CALL FOR HELP"
ON BOTTOM OF UNIT:
"PUSH BUTTON. TONE INDICATES CALL PLACED."
Plating material is .012" aluminum with 5 letter spacing.
Aiphone Communication Systems
1700 130th Ave. N.E.
Bellevue, WA 98005
[phone]
FAX [phone]
TOLL FREE TECHNICAL SUPPORT:
[phone]
TOLL FREE FAX LINE:
[phone]
TECHNICAL SUPPORT E-MAIL:
[email protected]
NOTE:
Only information regarding the connection and
operation of the AI-NVP-RA is shown here. Please refer
to the AI-900 Installation and Operational literature for
additional information on the AI-900 system.