Aiphone IX-DVF-PR User manual

1
The IX-DVF-PR is an IX Series video door station with a built-in AC-PROX-1G proximity card reader. The card reader uses a standard
Wiegand interface to connect to a compatible access control system.
IX-DVF-PR
INSTALLATION GUIDE
IX-DVF-PR Dimensions: 11-11/16" H x 7" W x 1-15/16" D
Back Box Dimensions: 10-7/16" H x 5-13/16" W x 2-3/8" D
For ush mounting, recess the supplied back box into the wall,
then attach the mounting bracket using the four provided bracket
screws.
For surface mounting, use the SBX-IDVFRA surface mount box.
This box can mount to a standard single-gang box or to any at
surface.
The IX-DVF-PR is congured as an IX-DVF door station using
the IX Support Tool or IXG Support Tool. Refer to the appropriate
Quick Start Programming Guide for instructions.
Installation and Conguration
• Camera with manual vertical adjustment +15º, 0º, or -8º
• Two contact outputs, six trigger inputs
• Built-in RFID proximity reader
• Stainless steel faceplate
• SIP and ONVIF® Prole S compliant
• MicroSD™ card slot
• 802.3af PoE
Features
1. Camera
2. Microphone
3. White LED for low light illumination
4. Speaker
5. Function Indicator
6. Call Button
7. Card Reader
Names and Functions
Package Contents
1
2
6
4
3
7
IX-DVF-PR
5
Security Driver
Flush mount backbox
and tamper-resistant screws
IX-DVF-PR
Door Station

For more details about the features and information above, please contact Technical Support.
205/23
Aiphone Corporation | www.aiphone.com | [phone]
Wiring Diagram
FCC WARNING:
This device complies with Part 15 of the FCC rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference that may cause undesired operation.
For proper regulatory compliance, the drain wire should be disconnected at the power supply end of the cable.
Changes or modications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Specications
Card Reader
Reader Type: 125-kHz Proximity Reader
Reader Model: AC-PROX-1G
Power Source: 5 ~ 16V DC
Current: 30mA (average); 75mA (peak)
Terminations: Color-coded pre-wired pigtail
Wiring Distance: 500'
Operating Temp: -31°~150°F (-35°~66°C)
Operating Humidity: 0% to 90% relative humidity
non-condensing
Door Station
Power Source: PoE (IEEE 802.3af class 0) or
24V DC (PS-2420UL)
Power Draw: 5.28W
Camera Unit: 1/3" CMOS 1.23 megapixel
Min. Illumination: 5 Lux
Terminations: RJ45 jack for audio/video
Pigtail for door release
Operating Temp: -40°~140°F (-40°~60°C)
Wiring Distance: 330'
Dimensions: 11-11/16" H x 7" W x 1-15/16" D
w/ SBX-IDVRA: 11-11/16" H x 7" W x 3-5/16" D
Connect theConnect the
reader to thereader to the
access controlaccess control
host accordinghost according
to the host'sto the host's
installation guide.installation guide.
Wiegand Wiring
Conductor Function
Red 5 ~ 16V DC
Black Ground
Green Data 0
White Data 1
Brown Red LED
Orange Green LED
Yellow Card Present
Blue Beeper
Violet eaPower
Drain Shield Ground
Access
Control Host
PoE Switch
Cat-5e/6Cat-5e/6
IX-MV7-*IX-DVF-PR