Aiphone RX-JA User manual

- INSTRUCTIONS -
WIRING DIAGRAM:
RX-JA
Flush Mounted Door Station for the RAX/RCX Systems
Special
Order
Products
1
2
3
4
RA-B
RAX or RCX
CEU1
2
3
4
1
2
3
4
1
2
3
4
NOTES:
1.In this example the RX-JA is shown connected
to station 10. Any open station number can be
used.
2. When the call button is pressed on the RX-JA
the external bell will activate, alerting internal
master stations that there is a call from the
door.
3. Any master station can call the RX-JA.
4.Only wiring concerning the RX-JA is shown
here. For complete installation and wiring
information, please refer to the standard RAX/
RCX instructions.
The RX-JA is a weather resistant door station for use with the RAX or RCX Microprocessor-
based intercom system.
#10
#11
#12
1
2
3
4
RA-D
Aiphone Communication Systems
1700 130th Ave. N.E.
Bellevue, WA 98005
[phone]
FAX [phone]
TOLL FREE TECHNICAL SUPPORT:
[phone]
TOLL FREE FAX LINE:
[phone]
E-MAIL: [email protected] RX-JA Instr. 1198bkjd
RX-JA
1
2
3
4
BELL
To Power
for Bell
BLACK
SPECIFICATIONS:
Power Source: Supplied by master station
Call Button: Single pole, single throw, normally open
Call Annunciation: Pressing call button at sub activates external device
Call Button Contacts: 24V DC, 1A (Max.)
Mounting: 2-gang electrical box
Wiring: 2 twisted pair homerun to RAX/RCX CEU,
plus 2 wires to external signaling device.
Use Aiphone #832204 for homerun wiring,
#812202 for bell connection.
Wiring Distance: RAX: 2,000' with 22AWG
RCX: 6,500' with 22AWG
Dimensions (H x W x D): 4-1/2" x 4-9/16" x 3/8" (outer depth)
NOTE:
Call-in signal from RX-JA will
not be heard at the master
stations. An external doorbell or
sounding device must be used.