Aiphone TD-H Series User manual

ox, D AIPHONE
TD-H Series
SELECTIVE CALL INTERCOM
TD-1H/B (1-call)
TD-3H/B (3-call)
Models: TD-6H/B (6-call)
TD-12H/B (12-call)
TD-24H/B (24-call)
INSTALLATION & OPERATION MANUAL
CONTENTS
1 SYSTEM OUTLINE & COMPONENTS 1.00... .cccccccccccccecceccceccecccceccusscesecccccuceussuuuseusevsusuausaccsceceeveeueerresanees 1
2 NAMES TEAPIUIRES о Diar eeu eate о ince ute DR EP атоо сі 2
3 PRECAUTIONS ON INSTALLATION & МАІМ... 3
SER VALET tee esata ama TEE 4~9
MOUNN "c a Rie IO a EY ee Ce а ен 10
NES UNION TT IMBPMeT"—E———————————— 11
7 CBEBANING THE ЕООІРМЕМТ Ын имамын ы Nue eoe Uaec a ааны кыы EE Qoae odio rio oe ноа оаа 12
8 TECHNICAL PREGAUTIONS а.о si eor dee Revera cu bene te ыны etu а е аа оао охоо, 12
S scc uU e c нарын ыргылдык AE кы аа АНЫ Мыр иы Аны а КАЙ ны ш ны а 12
SYSTEM OUTLINE & COMPONENTS
Ш System outline
TD-H/B is a multi-channel selective-call intercom. On loop-wiring, five TD-H station models,
intermixable, can be configured to all-master, master-selective system or mixed. Additionally, using a
potential station(s), PanTilt MY and/or audio IE/IF door stations (2 max.) and paging zone(s) may be
incorporated.
All-master network Master-selective network
Ш Package contents
* TD-H phone station
e Packet of screws
--*
-
wo
=”
т
il leer"
| «=
e Installation & Operation Manual
Maa
=
|o ed ee |
r 8. 7»
se me
wi
TD-12H/B,
TD-24H/B,
etc.
Intermixed network
--- Communication
= Cable
Ш Components available
e Intercom master stations: Intermixable PS-12A or
TD-1H/B
TD-3H/B
TD-6H/B
TD-12H/B
TD-24H/B
PS-12C
Terminal box with 1.5m, 5 feet cord for connecting TD-nH for desktop use,
or surface wall mounting.
Pd:

Ш Optional accessories
DE-UR
Door station
adapter
IF-DA
Door station
MY-DC/A
PanTilt video
* MYH-CU
PD-2
RY-AC/A
Call extension
relay
A
• |E/IF Series • MY Series e PD-1,
IE-JA, IE-NC, MY-DG/A, MY-EA Sub-monitor no talkback
IE-DC, etc. MY-FA, MY-CA,
etc.
NAMES & FEATURES
Ш
Names
&
functions
B
Features
*
Wall cradle
Fill in directory
—
1,7 "
2,8
3,9 Station-select х=
4, 10 a
5,11 x
6, 12 x
i
g
"i
Tam
ҮП
d
А
ECCE
|
_/
Piezo-speaker
for call tone
|
ГЛИНИ НА
ЗЕМЕ РЕ RESI
| CALL *
CALL A to select *
and ring A1-A12
stations
Press on bottom edge
of cover
TD-24H/B
Ш Handset cradle
Reversely attach wall-mount cradle for desk use. -
Wall-mount X
cradle
Ш Cable clamp
Two cable clamps (parts) are included on every TD-nH
chassis. See page 10.
B Directory card
For TD-24H/B, fill in names on 2 lines, aligning with the
right sample.
Intercom communication among 25 stations
(max.) in all-master configuration.
Single-master system, with TD-1H/B
station, or intermixed.
Intermixable five TD-H station models in a
system
Multiple talk paths for intercom (and paging)
Station-select break-in call
Max. 28 conductor cable, station to station
PanTilt video or audio door station (2 per
system)
Incorporates a zone(s) for paging (with
talkback)
Call extension buzzer or light
AIPHONE TD-24H
President
A Conf. 1
1
Heception
A Conf. 2
11
[roi
a.
CALL А CALL
eA ed

PRECAUTIONS ON INSTALLATION & WIRING
/N CAUTION
* Do not connect any terminal on any unit to AC power lines to prevent fire or unit damage.
* Do not install more than one power supplies PS-12A (or PS-12C) for an entire TD-H system,
including adaptors for door station and/or paging.
* Do not attempt to install or connect wires on TD-H equipment while system's power supply is
plugged in.
* TD-H masters and related equipment, except door station, are designed for indoor use only. Do not
install outdoors.
* Do not connect any other power source than specified on terminals +, —. Doing so can damage the
TD-H equipment.
IMPORTANT
* For system's installation, there is no need to disassemble the equipment. Do not open any TD-H
system components unless properly qualified.
* Any other manufacturer's products installed with this system (power supply, external signalling device,
etc.) are not covered under Aiphone's warranty.
* Do not mount TD-H equipment in the following places, as it may cause the system to malfunction:
e High or extreme cold temperature areas: under direct sunlight, near equipment that varies in
temperature, in front of air-conditioner, inside a refrigerated area, etc.
* Places subject to moisture or humidity extremes.
• Places subject to environmental conditions, such as dust, oil, chemicals, etc.
ж TD-H is an electrical device, which must пої be subjected to water, or any other liquid.
* Weather conditions, such as lightning storms, may cause damage to TD-H equipment. We
recommend that power surge protection be installed as follows: (However, this does not guarantee
that no damage will occur).
* When using a power supply
that has no GROUND terminal, S ADATTA
install a surge arrester near the etsy
output as shown.
E DC power
Supply -
Surge-arrester
"d | Grounded
Install a surge-arrester =
(discharging voltage:
100~180V)at a point
close to the output,
taken to earth ground.
= Ifthe power supply has a GROUND terminal, take it to an earth ground. In
this case, a separate surge arrester is not necessary.
Ш Before actually installing the TD-H system, the contents on pages 4 ~ 10 must be thoroughly read
and understood.
us

WIRING
Ш All-master system configurations
TD-H is basically designed for making all-master system on looped trunk cable, as per table below;
Models Station capacity Cable required (*)
TD-3H/B 4 stations 7-conductor cable
TD-6H/B 7 stations 10-conductor cable
TD-12H/B 13 stations 16-conductor cable
TD-24H/B
25 stations 28-conductor cable
(*) Includes a conductor for D terminal required for a DE-UR(s)
TD-1H/B, 1-call sub providesTD-3H/B ~ 24H/B all-master network with own communication points
(intermixed system).
Ш Cable requirements
Use multiconductor cable (non-twisted), 0.65 ~ 0.8mm dia., 22~ 20AWG, to accommodate maximum
number of intercom stations, and featured audio or PanTilt video door station(s) and/or page to a
zone(s), each of which uses one potential wire.
Ш Terminal - blocklayout — x*Two cable clamp tips are attached on chassis. (See page 10)
ejl
Kodo ee eet
jel
hogg
TDW-1/A TDW-3/A
© со ч обо (ою -— (0С) 1! +
{шг дд] Ф]®
i ЫЫ Юю m O
TD-12H/B TDW-12/A TD-24H/B TDW-24/A
Ш Power supply
TD-6H/B TDW-6/A
Meaning of terminal symbols
No. 1 ~ 24 are selective station
points, providing selective calling
and communication for master-
to-master communication.
C terminal is a call tone signal
receive terminal.
D terminal is a door station call
tone line.
+, — terminals are 12V DC
power supply lines.
Entire TD-H intercoms can be powered by a single PS-12A(12C) power supply, and locate it in the
center of the trunk cable. It can also power directly such adaptors as DE-UR, PD-1 & PD-2, which
must be all located within 5m, 16' distance from PS-12A(12C).

Ш
TD-H
single-master
system
|
TD-6H/B
TD-1H/B
(w/ TDW-6/ )
TD-3H/B - TD-24H/B makes a single-master network,
using TD-1H/B 1-call station to call the master station.
TD-1H/B with CALL button only, is allowed to call
TD-H master station only. |
T
ges
HH
PS-12A/12C
Ш TD-H all-master system
TD-H all-master system can be made by running parallel conductors from station to station.
No. of conductors required is: 2 common (or 3 with D line) plus number of TD-H stations installed.
As
shown,
one
more
TD-H
station
(the
last
#)
may
be
added
on
each
own
No.
button.
TD-6H/B
TDW-6/A
TD-3H/B TD-6H/B
+
1
2
3
4
1 2
3
4
5
6
7
TD-3H/B
(w/
TDW-3/A)
Ше
12EB;
2
3 4
5
6 7
8
9 10
11
12
13
TD-12H/B
(w/ TDW-12/A)
ENPTENN ID.
А(ПИП Jj
a= у == = fi
ОЮ) |
ш ЖЕ =
EE 1 1 1 1
2 2
et zt et et to
C 4 4L 4 4 4 ЕЕ
5|— Же. 5 1—15 1—15. 151—15]
б 6 Ty Төн ae aL ng E
Eime тее ү | pg =,
| | 88 sre =. :
СА!
ч
qe
#
9|
e
9
[9]
10 H10H 10H I 10 10|!
от
тет
не
от
ра
ы
|
(11) jid H BR 11 11 ieee C 11 11
12 H2H— 12—12—512| 12 21171210 42
[11
H—M(21
+{3+—4}—
EE
185—9]
не
—
inm
12-—
Rs
[D] [D | [D] je [D | m |5 [D] [D |
+ tee 01У

Ш TD-H all-master system
TD-24H/B
1
2 3
ГЕ
lh
i
il =
EN
БЫ.
Es
Б
^
HTH tH
Э 5
] poi TE
аттатат |
12
3
КЕРТ i
ши X "i m
T. н
HOUT! |
1H Eg 1 1
CAEL H H ШЕГИН HATH
KTH анин HHT
Serre e Е e
нй Д 2] e К АЛ
SEI I| [5 119-1 119) ium En
С 6
үе е iE
TM ài sor
го
|
9
С
9)
9
T moe
mi ЖШТ
12 С
a) i
LATERI
CALL A |
ПАКТ
MIT
_ = Е
А5 рар T.
ГЫ ТА A
а AST T ас ЕН ЕЙ
; 9
| paar SEE Aer AS до a А9
ot} Ца — Lia a А RRA Па АП
an HHn Ана Lara fara} Hato ТА | tarot | eral | Тат
Halm 221 zi [im -lH o NE
—— е) UY] уу путу еу леу те =] [DJ
Ш TD-H intermixed system TD-6H/B
TD-6H/B
TN
EE BE
TD-1H/B
TD-1H/B
TD-1H/B
Intermixed system is an all-master & single-
master combined within a system.
. Each TD-H master station may have additio-
nal contacts with TD-1H/B, 1-call station (s).
TD-1H/B stations can be wired to the TD-6H/B
master station, using unused conductors in
the trunk cable
(w/ TDW-6/A)
к]
=
2 {= PS-12A/12C
Cable requirements
Wiring distance
+
EN
Use a multi-conductor (non-twisted) cable 0.65 ~ 1.0 mm dia., 22 ~ 18AWG for TD-H intercoms.
TD-H intercoms (any communication)
0.65mm | 0.8mm
Distance

13 14 15
TD-24H/B (w/ TDW-24/A).
ub j | i
ы
Г
THAT
ЖЕ
ШЕН
Лү
HA
=
|
SEE
2
2
2 2
a
е
е
te
LES
EC
3
3
'3
3
EE
Rode
gl
4
a
ра
Er
—_
151
HEEL
TTT
554
eH
—
pe
HsH
1—18]
i
©
Г
UL
ү
nea
ett
ed
Шш
18-18
i
5
9
|
|9
|
|
—
popoia
10
“Hol
11
TH
А
11)
|11]
11
Н
H2H—
112)
1214—12)
12)
[D] [D]
I
[D]
[D]
[D]
D]
[D]
кз
E
ШЕ
eH
C
A1
‘All
-
—
C
Ha
AD
-
[5
Jaz
—
А2
H
AD
A2
EE
=
C
=
A3
=
АЗ
АЗ
E-
E
IE
E
ГАД
d
Ho
cde
e
E
HN
NN
т
БИ
[үр
Ааа
PAS
ee
Ат
AA
[A5
АБ
С
А5
А5
ш
ош
ы
шыш
ш
Pr
ки
ш
|
А7
H—
А7
А7
А7
А7
[e
A7
A7
А7
|
дё
ast
—
Ав-ав,
Ав
ASH
—
Ав
e
[—
a8
as
—
дв
А9
А9
A9
A9 A9
A9
A9
A9
C
A9
A9
A9
A9
8.318.
i
IM
ше
шш
ш
—
9
—
ши
иш
шш
шш
Ar
[—
Tn
T
Dat
ГИ
DELTA
DET
TA
TAI
TER
1B]
a
[A12
A12
А12
А12
NN
BE
A12 A12
E
A12
C
[A12]
‘All
Lag
AS;
HAT
Ab
E
|
Fl
‘AQ
AIH
ЕЯ
А12
——
1
2
4
5
6
TD-6H/B = ==
(w/ TDW-6/A) | i 5
1]
H
i
3
TD-H system may have one or two audio door
station
IE/IF
series,
using
a
potentia!
station.
4
Intermittent
tremolo
rings
at
max.
12
TD-H
C
phones.
For
2nd
door
station,
change
SW.
to
rg]
B
position
on
DE-UR,
to
change
cali
tone
faster.
ЕЕ
р
• From DE-UR to IF-DA, etc.
+
0.8mm
|
1.0mm
Em
E
|
360m
22AWG | 20AWG | 18AWG
1,100
* From DE-UR to power supply
AWG | 22AWG | 20AWG | 18AWG
20m 55
Sre

Ш PanTilt video integration to TD-H
When MY-DC/A calls in, TD-6H/B stations
receive an intermittent call tone, with an image
on video-monitors. Pick up and select the
assigned # station to reply.
3 common + No. of TD-H
stations/ adaptors installed
MY-DC/A
А
ATH TAT
* Strictly observe that DE-UR
is adjacently installed to the
PS-12A/12C, so as to be
powered
from
it.
To
EL-9S
&
d
AC trans.
MY-CU cable requirements & power supply
2 conductors (non-twisted) from MY-CU to MY-DC/A.
6 conductors (non-twisted) from MY-CU to MYH-CU sub-
monitors with no extra conductors in the cable.
Wiring distance
e From MY-CU to power supply • From MY-CU to PanTilt door MY-DC/A
Diameter | 065mm | 0.8mm
Distance | 50m
18AWG AWG . | 22AWG |20AWG | 18AWG
Distance | 165
• Between TD-H intercoms (any pair)
0.65mm
Diameter
| Distance 650m
Distance
e From DE-UR to power supply
08mm | Lomm
т | Bom —
AWG 22AWG |20AWG | 18AWG
30 | 50 | 65
* From MY-CU to MYH-CU #1 (2 monitors)
атт | 1.0mm
35m | S0m | 75m
AWG 22AWG |20AWG | 18AWG
150 | 250
« From MY-CU to MYH-CU #2 (3 monitors)
0.65mm | 0.8mm | 1.0mm
20m | 30m | 50m
AWG 22AWG | 20AWG | 18AWG
6$ | 100 | 150

Ш Paging adaptors PD-1 and PD-2
TD-H phones
= eee
n !
* PD-1 paging adaptor
Paging speakers
0222 100V or 70.7V line
ЕГЕР
[OW ©
Paging SP
Paging SP
33 Talkback SP
To PS-12A/12C
BE
ELE
e PD-2 paging adaptor w/ talkback
Paging
speakers
(of TD-H phone)
Ш Call extension relay RY-AC/A
(w/ TDW-G/A)| |
oj» ©
s]
Talkback speaker
z
En
0
* PD-1 or PD-2 controls each paging zone,
using an amp. & paging speakers.
* Multiple paging zones and channels.
* One PD-2 for paging with talkback.
* Must be powered by TD-H's power supply
PS-12A/12C.
* Use paging speakers SP-3NA (SP-5N in
USA).
* Connection to background music source.
e
um
E;
PS-12A/12C
TD-6H/B
(w/ TDW-6/A)
1
a
li
n
«I
ШИ
| d БЕРЕ
g~-
BE
RY-AC/A
will
activate
when
station
#3
receives
a
call
from
a
handset
station.
It
lasts
as
long
as
that
TD-H
station
is
ringing.
Buzzer ratings:
0.3A 240V AC or
1.0A 24V DC,
mechanical type
only

* When drawing out a TD-H station's wires from trunk
cable, connect each junction with secured insulation.
Or use TDW-n terminal box, allowing plug-in to TD-nH
MOUNTING
* Make sure PS-12A/12C is unplugged while makin
wiring connections. |
ire-nut,etc.
on 1.5m cord end. | TD-H trunk cable
Ш TD-nH wall-mounting (on gang box) CN connectors: CN-1 on TD-1H/B, 3H/B
CN-1, 2 on TD-6H/B, 12H/B
1. Loosen a front bottom screw. CN-1 - 3on TD-24H/B
2. Lift the front case off the chassis, and unplug CN1 -
3 connectors (varies by model) to disconnect TD-24H/B Unplug
; Unplug CN-1.2
intercom. ‚коп! саге CN-3 ^ A
3. Mount the chassis to single-gang box with 2 screws
supplied. Single-gang box
4. Make wire termination on each screw terminal DT
inside the chassis.
5. Plug in CN connectors back to each socket.
6. Hemount front case to chassis, fastening bottom
screw. |
Chassis
* Puttogether the connector leads to avoid pinching Screw(2)
by
hook
knob
or
front
case.
supplied
Ш TD-nH desk or surface wall mounting
Use TDW-n box for either desk-top * Anchor TDW-n cord on the
or surface wall mounting. chassis
||
ОЧ ДН |
| Вел ea. Fasten with
Же
с
a
screw
3X6,
EN "2 | self supplied
1.5m,5' ER m
long
TDW-n cord
d
Chassis
Cable protector TD-24H/B Chassis Inside
* Install TDW-n and cable in
non-trapping
manner.
*
Fasten
TDW-n
cord
or
Loosen a screw
station
cable
with
a
clamp
:
:
(Cut
off
the
parts
from
*
The
CN-1,2
and
CN-4,5
TD-1-12H/B chassis).
connectors, becoming,
inutilized, should be folded
neatly, and not be cut off.
TDW-24/A
:
g
TDW-24/A
box
TD-3~12H/B
(3-5/16")
А 83.5mm
Or - P4 |
0009909999909)
Front case
Cable clamp © Chassis
e CN2 : TD-6H/B & TD-12H/B only
Attach 1.
cd