Air Oasis iAdaptAir S User manual

For use with iAdaptAir®S, M, L Models
For safety and to ensure proper use carefully
read the contents of this manual before
operating or installing the unit.
Due to continuous improvements, the picture included
within this owner’s manual may differ slightly from the
actual product.
R2019.05.20

Thank You for Choosing The iAdaptAir®
Congratulations, you own the smartest, most effective, user-friendly air purier.
Before operating the iAdaptAir®, please read this manual in its entirety. Doing so
will give you important information to keep you safe from harm and ensure you get
the most benets from your device. For additional information please contact us:
Mail: Air Oasis, LLC
Attn: Customer Service
3401 Airway Blvd.
Amarillo, TX 79118
web: www.airoasis.com
e-mail: [email protected]
phone: [phone]
Lifetime Warranty..…………………………..............…………………….………...Page 1
Important Safety Instructions………………………………….…….............…....Page 2
Base Installation………………………………….…….............…......................... Page 3
Operation/Control Panel……………………………………………………............Page 4
How To Connect To Wi-Fi/Wi-Fi Functionality….………………………….. Page 5 - 9
Maintenance..................................……..………………..…............…….....Page 10 - 11
Filter Replacement......................……..………………..…................….......Page 12 - 13
UVC Lamp Replacement......................………..…...................…..…................Page 14
Troubleshooting Guide………….………………………………..............…........ Page 15
Specications..………………………………………….…................…................Page 16
Table of Contents

1
Lifetime
Warranty
We proudly manufacture the highest quality products and test each one individually
before it leaves our facility. We are pleased to offer the following warranties:
The following products have a lifetime warranty: iAdaptAir® (S, M, L), 1000G3,
3000G3, 3000XG3.
If you purchased a product from Air Oasis or an authorized Air Oasis reseller,
process warranty and repair requests using the RMA Form at www.airoasis.com/
rma.
The Air Oasis warranty has the following requirements:
• Purchases made and received within the USA.
• Non-transferable.
• Product Registration or proof of purchase may be required.
• Excludes lters and parts intended for regular replacement.
• Normal recommended usage, has not been subjected to physical abuse,
chemical exposure, water damage, damage caused by acts of God, the use of
voltages other than indicated on the label displayed on this product or service
of this product by anyone other than Air Oasis or an Air Oasis authorized dealer.
• Filter and AHPCO®Cell replacements have occurred as recommended.
• Warrantied products may be replaced with new or refurbished units of the
same or similar model.
Air Oasis’ liability for damages to you for any costs whatsoever arising out of this
statement of warranty shall be limited to the amount paid for this product at the
time of original purchase, and Air Oasis shall not be liable for any direct, indirect,
consequential or incidental damages arising out of the use or inability to use this
product.
NOTE: An RMA# is required for any warranty service work. All returned
packages that do not have an RMA# will be refused.

Important Safety Instructions
When operating any electrical appliance, basic precautions should always be
followed for safety.
WARNING: To reduce the risk of re, electric shock or injury:
• Carefully read the entire contents of this manual.
• Do not use outdoors or on wet surfaces.
• Do not use the unit in areas of extreme heat or in the presence of ammable gas.
• This unit should only be serviced by a licensed professional. The warranty
will be void and serious injury could occur if serviced by anyone other than a
licensed professional.
• Do not handle the wires or appliance with wet hands.
• Do not use damaged or uninsulated wires. If appliance is not working properly
call a customer service representative at 1-800-936-1764.
WARNING: RISK OF ELECTRICAL SHOCK. CAN CAUSE INJURY OR DEATH.
DISCONNECT UNIT FROM POWER SUPPLY BEFORE SERVICING.
Store and transport -4˚ F ~ 180˚ F, humidity 10% ~ 90% (Non Condensing).
Do not operate unit in ambient temperatures above 150˚ F.
KEEP OUT OF REACH OF CHILDREN
Use the unit on a at surface and keep out of direct sunlight.
To prevent electrical shock, please remove the power plug before maintaining or moving
the appliance.
Please do not clean the appliance with any type of acid-base solutions to prevent damage
and electric shocks.
Do not block the air inlet & outlet.
Make sure the unit is used within the voltage of 110~240V/50~60Hz.
Please do not use a wet hand to insert or remove the power plug to prevent electrical
shock.
It is strictly prohibited to rinse the appliance with water. Do not use the appliance near
water sources or volatile ammable items to prevent electrical shock.
The product is not a toy, hence it is prohibited for children to play with the appliance in
order to prevent damage.
Do not sit or stand on the appliance. Do not use the appliance when it is shaking or tilting.
It is prohibited to obstruct the air outlet to prevent reducing the purifying efciency.
If unit is operating abnormally, please unplug the power, and contact the manufacturer.
If the air purier is damaged, immediately disconnect the power and contact the
manufacturer.
When cleaning, use a soft, dry cloth to gently wipe the air purier. Use a small brush to
softly clean the air outlets.
2

3
Base Installation
1. Using the four included screws, attach the base. This will prevent injuries by
ensuring the unit is stable and will not fall over.

4
Operation
1. After connecting the power supply, you will hear one beep and the control
panel will illuminate for two seconds before entering standby mode.
2. Power button:
1st press turns on the unit, ionizer, UV light and low fan speed.
2nd press turns off the ionizer.
3rd press turns off the UV light.
4th press keeps the UV light off and turns ionizer on.
5th press switches the unit to standby mode.
3. Fan Speed: will cycle the fan speed to Low, Medium, or High.
4. Timer: Sets an auto off timer for two, four, or eight hours.
5. Child Lock/Sleep Mode: Press for three seconds until you hear a single
beep, signifying Child Lock/Sleep Mode has been activated. Once activated,
all settings will be locked and control panel lights will dim. Tap any button to
temporarily illuminate status icons to view locked settings. Pressing the Child
Lock/Sleep Mode button for three more seconds will unlock the control panel.
6. Smart Mode: Press to activate Smart Mode. While in Smart Mode, the fan
speed will automatically adjust according to your air quality. If the iAdaptAir®
senses a reduction in air quality, the fan speed will automatically increase.
When the air quality improves, the fan speed will automatically decrease to
extend lter life.
Control Panel
• Feather touch controls are operated with a light touch of the nger.
• The backlit controls allow for easy operation even in dark conditions.

5
How To Connect To WiFi (Optional)
1. Open the WiFi settings on your smart phone and connect to your WiFi (must
be 2.4GHz, as the iAdaptAir® cannot connect to 5GHz).
2. Plug in your iAdaptAir®.
3. Keep the iAdaptAir®, router and your smart phone within a ve ft. circle.
4. Click +NEW PLACE if you have not previously connected the app to a WiFi
network.
Select a picture or
take a photo.
Click ADD after all
info is filled in.
Enter the password
for your WiFi.
Name your new place.
Re-enter the password
of the WiFi router for
verification.

6
5. Click +NEW DEVICE and scan the device QR code. It’s located on the bottom
right corner of the quickstart guide and under the lter cover.
Personalize the name
of your device.
Click ADD after
completing all fields.
You can use the default
image or take your own
photo.
If you have other
places on the same WiFi
network, you can select
between them.
or
or

7
9. If connecting the device fails, check the following...
• Do you have a WiFi signal?
• Did you enter the correct WiFi password?
• Is the iAdaptAir®plugged in?
• Is your smart phone connected to the same WiFi network as your
iAdaptAir®?
• Is the iAdaptAir®connected to another router? If it is, turn that router off and
wait for 5 minutes; or reset the iAdaptAir’s®
WiFi settings (see next page)
6. Step 1/3: writing the router information to the device.
7. Step 2/3: connecting the device with the cloud server.
8. Step 3/3: updating the device information into the app.

Wi-Fi Functionality using the Control Panel
Viewing Wi-Fi Status
1. Press Smart Mode button once at standby (power plugged-in but not
operating). It will show the status of the Wi-Fi connection.
Green Flashing Happy Face = not connected
Solid Green Happy Face = connected
Red Frowning Face = Wi-Fi turned off
2. Hold the button for more than 3 sec., it will reset the Wi-Fi network name and
password.
3. The status will show for 1 min. and then return to normal automatically.
IMPORTANT: Don’t reset the device by step 2 if device is still registered
in the APP. You will need to delete the device from APP before restarting.
Turn Wi-Fi On/Off
Hold Fan Speed button for more than 3 sec. at standby mode. The Wi-Fi will turn
off. The Wi-Fi status will be shown by the red & green LED for one min. Unplug
the unit for 5 seconds and the Wi-Fi will automatically restart after the unit is
plugged back in.
8

9

10
Dust Guard Maintenance
Maintenance
• Pivot the dust guard outwards and lift up to remove it from the air purier.
Ensure the iAdaptAir®is disconnected from its’ power source before
performing any maintenance.
• Use a vacuum to remove any debris. Wipe down the dust guard with a damp
rag. Dry before replacing in the iAdaptAir®.

11
• Bi-Polar Ion Brushes: Using a pipe cleaner or a 0.2” or less diameter dowel
rod to insert in to the 2 holes in front of the brushes to knock off any debris
buildup. Clean the brush heads periodically for optimal effectiveness.
• Use a soft cloth to clean the exterior surfaces. (Do not use chemicals or
alcohol)

12
Filter Replacement
1. Open the lter cover by sliding it to the right.
2. Take out the old lter & replace with a new lter
When the lter replacement reminder turns red, the lter is
nearing the end of its’ useful lifespan & needs to be replaced
soon.

13
3. Close the lter cover.
4. Press and hold the “Filter Replacement Reminder” for 3 seconds to reset it.

Release
lever Connectors
14
3. Squeeze the release lever on the back of the lamp connector while pulling
connector apart.
2. Slightly rotate and move the UV Lamp forward to remove it from the clips.
UV Lamp Replacement
1. Remove the lter cartridge and dust guard. (See instructions on pages 10-
Ensure the iAdaptAir®is disconnected from its’ power source before
performing any maintenance. UV Lamp may be hot. Allow time for the lamp
to cool before removing it.
4. Reverse the steps from (3-4) to install the new UVC lamp.
WARNING
OPTICAL RADIATION EXPOSURE HAZARD
DO NOT ATTEMPT TO OPERATE UNIT WITHOUT
ALLUMINUM SHELL COVERINGAHPCO CELL.
DO NOT ATTEMPT TO REPLACEAHPCO
CELL WITHOUT DISCONNECTING POWER.
PERMANENT EYE AND SKIN DAMAGE MAY RESULT.
Hg lamp contains mercury. Manage in accord with disposal laws. Find disposal
centers at www.earth911.org.
For optimal performance and maximum eciency of your iAdaptAir®, ensure
all UV Lamps are replaced annually.

15
Troubleshooting Guide
Malfunction Checked Items Solving Measures
The Machine is
Not Working
Is the power switched on? Press the power button
Is the power adapter loose
or broken?
Connect or change the power adapter
Odors from the
Air Outlet
The lter cartridge has too
much debris.
Replace the lter cartridge
Filter lifespan has expired. Replace the lter cartridge
Poor
Performance
Is the iAdaptAir™ placed
in an unventilated area or
is something obstructing
the inlet or outlet.
Change its location and remove the
obstructions.
No Air Flow Foreign items blocking the
air inlet or outlet.
Remove foreign items

16
Specications iAdaptAir-S iAdaptAir-M iAdaptAir-L
Warranty: Lifetime Warranty Lifetime Warranty Lifetime Warranty
Voltage: 100-240VAC 100-240VAC 100-240VAC
Rated Power: 8 WATTS 24 WATTS 32 WATTS
Dimensions: 5.4in x 8.5in x 9.7in 11.2in x 11.2in x 28.3in 11.2in x 11.2in x 37in
Weight: 7 lbs. 15.5 lbs. 20 lbs.
Fan Speed: Low 700rpm, Medium
1000rpm, High
1200rpm
Low 700rpm, Medium
1000rpm, High
1200rpm
Low 700rpm, Medium
1000rpm, High
1200rpm
Timer Settings: 2hr, 4hr, 8hr 2hr, 4hr, 8hr 2hr, 4hr, 8hr
Ozone: 0.00 PPM 0.00 PPM 0.00 PPM
Replacement Filter
Cartridge:
Model #: AOIA-SF
HEPA, carbon and
AHPCO
Model #: AOIA-MF
HEPA, carbon and
AHPCO
Model #: AOIA-LF
HEPA, carbon and
AHPCO
Ion Output: 20,000,000 positive
and negative
20,000,000 positive
and negative
40,000,000 positive
and negative
Noise Level: 25dB low speed to
52dB high speed
25dB low speed to
52dB high speed
25dB low speed to
52dB high speed
iAdaptAir® Specications

Copyright © 2019 Air Oasis, LLC. All Rights Reserved.
We Care
About
Your Air