Air Oasis iAdaptAir S User manual

For use with iAdaptAir™ S, M, L Models
For safety and to ensure proper use carefully read the
contents of this manual before operating or installing the unit.

Thank You for Choosing The iAdaptAir™
Congratulations, you own the smartest, most effective, user-friendly air purier.
Before operating the iAdaptAir™, please read this manual in its entirety. Doing so
will give you important information to keep you safe from harm and ensure you get
the most benets from your device. For additional information please contact us:
Mail: Air Oasis, LLC
Attn: Customer Service
3401 Airway Blvd.
Amarillo, TX 79118
web: www.airoasis.com
e-mail: [email protected]
phone: [phone]
Limited Warranty..…………………………..............…………………….………... Page 1
Important Safety Instructions………………………………….…….............…....Page 2
Base Installation………………………………….…….............…......................... Page 3
Operation/Control Panel……………………………………………………............Page 4
How To Connect To WiFi….…………………………………..….............….....Page 5 - 7
Maintenance..................................……..………………..…............…….........Page 8 - 9
Filter Replacement......................……..………………..…................….......Page 10 - 11
UVC Lamp Replacement......................………..…...................…..…................Page 12
Troubleshooting Guide………….………………………………..............…........ Page 13
Specications..………………………………………….…................…..........Back Cover
Table of Contents

iAdaptAir™ Limited Warranty
Air Oasis gives you the following limited warranty for this product only if it was
originally purchased directly from Air Oasis or an Air Oasis authorized dealer.
Air Oasis will repair or replace, free of charge to the original purchaser, any part
that is found to be defective in material or workmanship within one (1) year of the
date of purchase.
This limited warranty does not apply to any part subjected to accident, abuse,
alteration, misuse, lack of reasonable care, the afxing of any attachment not
provided with the product, loss of parts, damage caused by acts of God, the use
of voltages other than indicated on the label displayed on this product or service
of this product by anyone other than Air Oasis or an Air Oasis authorized dealer.
Air Oasis does not authorize any person or dealer to assume or grant any other
warranty obligation with the sale of this product.
To obtain service, the customer must rst register this unit by returning the enclosed
Warranty Card. If you purchase this product from any source other than Air Oasis
or an Air Oasis dealer, your purchase is “AS IS”, which means Air Oasis grants you
no warranty, and that you, not Air Oasis, assume the entire risk of the quality and
performance of this product, including the entire cost of any necessary servicing
or repairs of any defects.
Air Oasis’ liability for damages to you for any costs whatsoever arising out of this
statement of limited warranty shall be limited to the amount paid for this product
at the time of original purchase, and Air Oasis shall not be liable for any direct,
indirect, consequential or incidental damages arising out of the use or inability to
use this product.
ALL EXPRESS AND IMPLIED WARRANTIES FOR THIS PRODUCT, INCLUDING
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO THE WARRANTY
PERIOD, AND NO WARRANTIES, WHETHER EXPRESS OR IMPLIED, WILL
APPLY AFTER THIS PERIOD.
Some states do not allow limitations on the duration of implied warranties, so the
above limitation may not apply to you. This warranty gives you specic legal rights,
and you may also have other rights which vary from state to state.
To obtain a Return Merchandise Authorization (RMA) number, please complete
the form at www.airoasis.com/rma
NOTE: An RMA# is required for any warranty service work. All returned
packages that do not have an RMA# will be refused.
1

Important Safety Instructions
When operating any electrical appliance, basic precautions should always be
followed for safety.
WARNING: To reduce the risk of re, electric shock or injury:
• Carefully read the entire contents of this manual.
• Do not use outdoors or on wet surfaces.
• Do not use the unit in areas of extreme heat or in the presence of ammable gas.
• This unit should only be serviced by a licensed professional. The warranty
will be void and serious injury could occur if serviced by anyone other than a
licensed professional.
• Do not handle the wires or appliance with wet hands.
• Do not use damaged or uninsulated wires. If appliance is not working properly
call a customer service representative at 1-800-936-1764.
WARNING: RISK OF ELECTRICAL SHOCK. CAN CAUSE INJURY OR DEATH.
DISCONNECT UNIT FROM POWER SUPPLY BEFORE SERVICING.
Store and transport -4˚ F ~ 180˚ F, humidity 10% ~ 90% (Non Condensing).
Do not operate unit in ambient temperatures above 150˚ F.
KEEP OUT OF REACH OF CHILDREN
Use the unit on a at surface and keep out of direct sunlight.
To prevent electrical shock, please remove the power plug before maintaining or moving
the appliance.
Please do not clean the appliance with any type of acid-base solutions to prevent damage
and electric shocks.
Do not block the air inlet & outlet.
Make sure the unit is used within the voltage of 110~240V/50~60Hz.
Please do not use a wet hand to insert or remove the power plug to prevent electrical
shock.
It is strictly prohibited to rinse the appliance with water. Do not use the appliance near
water sources or volatile ammable items to prevent electrical shock.
The product is not a toy, hence it is prohibited for children to play with the appliance in
order to prevent damage.
Do not sit or stand on the appliance. Do not use the appliance when it is shaking or tilting.
It is prohibited to obstruct the air outlet to prevent reducing the purifying efciency.
If unit is operating abnormally, please unplug the power, and contact the manufacturer.
If the air purier is damaged, immediately disconnect the power and contact the
manufacturer.
When cleaning, use a soft, dry cloth to gently wipe the air purier. Use a small brush to
softly clean the air outlets.
2

3
Base Installation
1. Using the four included screws, attach the base. This will prevent injuries by
ensuring the unit is stable and will not fall over.

4
Operation
1. After connecting the power supply, you will hear one beep and the control
panel will illuminate for two seconds before entering standby mode.
2. Power button:
1st press turns on the unit, ionizer, UV light and low fan speed.
2nd press turns off the ionizer.
3rd press turns off the UV light.
4th press keeps the UV light off and turns ionizer on.
5th press switches the unit to standby mode.
3. Fan Speed: will cycle the fan speed to Low, Medium, or High.
4. Timer: Sets an auto off timer for two, four, or eight hours.
5. Child Lock/Sleep Mode: Press for three seconds until you hear a single
beep, signifying Child Lock/Sleep Mode has been activated. Once activated,
all settings will be locked and control panel lights will dim. Tap any button to
temporarily illuminate status icons to view locked settings. Pressing the Child
Lock/Sleep Mode button for three more seconds will unlock the control panel.
6. Smart Mode: Press to activate Smart Mode. While in Smart Mode, the fan
speed will automatically adjust according to your air quality. If the iAdaptAir™
senses a reduction in air quality, the fan speed will automatically increase.
When the air quality improves, the fan speed will automatically decrease to
extend lter life.
Control Panel
• Feather touch controls are operated with a light touch of the nger.
• The backlit controls allow for easy operation even in dark conditions.

5
7. Filter Replacement Reminder: The smart iAdaptAir™ takes into
consideration fan speed, air pollutant levels, and run time to automatically
determine the optimal time to replace the lter. The button will change colors
to alert you of remaining lter life. The colors will cycle from green, to blue, to
red, as the lter life decreases. Once the light is red, the lter is nearing the
end of its’ lifespan and should be replaced soon. Once the lter is replaced,
press the button for three seconds to reset the reminder.
Additional controls can be found in the Air Oasis® phone app.
How To Connect To WiFi (Optional)
1. Verify that your smart phone is connected to WiFi.
3. Create an account
or go to Try without
creating account.
To create an account
enter your email and
create a password.
2. Download the Air Oasis app.
Scan QR code
with your smartphone
to get the Air Oasis
app FREE.
App Store
https://itunes.apple.com/us/app/air-oasis/
id1331579715?mt=8
Google Play
https://play.google.com/store/apps/
details?id=com.airoasis.android&hl=en_US

6
6. Adding a new device - Part 1
Press
+NEW DEVICE
Input QR Code by
using the camera or
input the QR Code
manually. (QR
Code is located
on the Quick Start
Guide and attached
on the air purier.)
4. After your account has been created, you will receive an
email. Press the “Activate” button to activate your account.
5. Adding a new place
Press
+NEW PLACE
Click on the camera
icon to take a photo
of the room or place
where you will be
using the air purier.
Enter a name for the
new place, select
a WiFi network,
and enter the WiFi
password if required.
Next, click the “Add”
button.

7
6. Adding a new device - Part 2
Press ADD to add
new device.
Device is connect-
ing to router.
After pressing OK
setup is complete.
You can now
control your new
device.

8
Dust Guard Maintenance
Maintenance
• Pivot the dust guard outwards and lift up to remove it from the air purier.
Ensure the iAdaptAir™ is disconnected from its’ power source before
performing any maintenance.
• Use a vacuum to remove any debris. Wipe down the dust guard with a damp
rag. Dry before replacing in the iAdaptAir™.

9
• Bi-Polar Ion Brushes: Using a pipe cleaner or a 0.2” or less diameter dowel
rod to insert in to the 2 holes in front of the brushes to knock off any debris
buildup. Clean the brush heads periodically for optimal effectiveness.
• Use a soft cloth to clean the exterior surfaces. (Do not use chemicals or
alcohol)

10
Filter Replacement
1. Open the lter cover by sliding it to the right.
2. Take out the old lter & replace with a new lter
When the lter replacement reminder turns red, the lter is
nearing the end of its’ useful lifespan & needs to be replaced
soon.

11
3. Close the lter cover.
4. Press and hold the “Filter Replacement Reminder” for 3 seconds to reset it.

12
3. Squeeze the release lever on the back of the lamp connector while pulling
connector apart.
2. Slightly rotate and move the UV Lamp forward to remove it from the clips.
UV Lamp Replacement
1. Remove the lter cartridge. (See instructions on pg. 9)
Ensure the iAdaptAir™ is disconnected from its’ power source before
performing any maintenance. UV Lamp may be hot. Allow time for the lamp
to cool before removing it.
Release
lever Connectors
4. Reverse the steps from (3-4) to install the new UVC lamp.
WARNING
OPTICAL RADIATION EXPOSURE HAZARD
DO NOT ATTEMPT TO OPERATE UNIT WITHOUT
ALLUMINUM SHELL COVERING AHPCO CELL.
DO NOT ATTEMPT TO REPLACE AHPCO
CELL WITHOUT DISCONNECTING POWER.
PERMANENT EYE AND SKIN DAMAGE MAY RESULT.
Hg lamp contains mercury. Manage in accord with disposal laws.
Find disposal centers at www.earth911.org.

13
Troubleshooting Guide
Malfunction Checked Items Solving Measures
The Machine is
Not Working
Is the power switched on? Press the power button
Is the power adapter loose
or broken?
Connect or change the power adapter
Odors from the
Air Outlet
The lter cartridge has too
much debris.
Replace the lter cartridge
Filter lifespan has expired. Replace the lter cartridge
Poor
Performance
Is the iAdaptAir™ placed
in an unventilated area or
is something obstructing
the inlet or outlet.
Change its location and remove the
obstructions.
No Air Flow Foreign items blocking the
air inlet or outlet.
Remove foreign items

Copyright© 2018 Air Oasis LLC.
iAdaptAir™ Specications
Specications iAdaptAir-S iAdaptAir-M iAdaptAir-L
Warranty: 1 Year 1 Year 1 Year
Voltage: 100-240VAC 100-240VAC 100-240VAC
Rated Power: 8 WATTS 24 WATTS 32 WATTS
Dimensions: 5.4in x 8.5in x 9.7in 11.2in x 11.2in x 28.3in 11.2in x 11.2in x 37in
Weight: 7 lbs. 15.5 lbs. 20 lbs.
Fan Speed: Low 700rpm,
Medium 1000rpm,
High 1200rpm
Low 700rpm,
Medium 1000rpm,
High 1200rpm
Low 700rpm,
Medium 1000rpm,
High 1200rpm
Timer Settings: 2hr, 4hr, 8hr 2hr, 4hr, 8hr 2hr, 4hr, 8hr
Ozone: 0.00 PPM 0.00 PPM 0.00 PPM
Replacement Filter
Cartridge:
Model #: AOIA-SF
H14 99.97% HEPA,
0.8lbs carbon and
AHPCO
Model #: AOIA-MF
H14 99.97% HEPA,
2.1lbs carbon and
AHPCO
Model #: AOIA-LF
H14 99.97% HEPA,
2.8lbs carbon and
AHPCO
Ion Output: 20,000,000 positive
and negative
20,000,000 positive
and negative
40,000,000 positive
and negative
Noise Level: 25dB low speed to
52dB high speed
25dB low speed to
52dB high speed
25dB low speed to
52dB high speed