4. Insert the Airaid Premium Filter into
the factory housing. The filter must be
fully inserted into the bottom of the
housing. Install the factory filter using
with the Airaid Premium Filter in the
reverse order. Double check your work
to insure that all connections are tight
there are no foreign objects in the
intake system.
3. Remove the element from the filter
housing and discard the element.
Remove all remaining glue from the
inside surface of the housing and clean
surface using a rag.
Synthamax Air Filters do not require oil. Service air filter as needed b
cleanin
with common non-petroleum all-purpose household cleaner and water. Simple
Green®, Formula 409® or equivalent works
reat. Appl
cleaner to outside of air
filter and allow to soak. Then flush filter clean from the inside out with a
arden
hose and repeat steps if necessary. Do not apply high pressure water or air to clean
filter. Allow filter to air dry and reinstall.
Airaid Filter Co. 2688 E Rose Garden Ln. Phoenix AZ 85050
800
498-6951 AiraidInfo
airaid.co
www.airaid.co
