Aircast Airselect Elite User manual

AIRSELECT ELITE
PATIENT GUIDE
Your healthcare professional will advise you on how to fit the Aircast
AirSelect correctly. The steps outlined in this booklet will ensure you are
able to fit the boot so that it fits correctly and comfortably, but please
contact your healthcare professional in the event of any queries.
CLEANING INSTRUCTIONS
• The shell of the boot can be wiped with a damp cloth and a mild soap.
• The socks supplied with the AirSelect Elite can be hand or machine
washed up to 60°C and tumble dried if required.
©  DJO - -EN - Rev C
AIRSELECT ELITE
PATIENT GUIDE
PATIENT NOTES
Always consult your healthcare professional if you intend to make changes to the
walker boot or its use.
This product is to be used under the supervision of a medical professional and is
not intended for unsupervised public use.
If you experience any pain, swelling, sensation changes or any unusual reaction
while using this product, consult your healthcare professional.
DJO Global |a Guildford Business Park |Guildford
Surrey |GU XG |UNITED KINGDOM
UK Tel:    |ROI Tel:    
www.DJOglobal.co.uk

FITTING THE AIRCAST
AIRSELECT ELITE
•Please ensure you are seated when fitting the AirSelect Elite.
•For comfort and hygiene, we recommend using the sock provided with
the walker boot.
1. Prepare Walker Boot:
•Check aircells are deflated
(See Step 1 of ‘Removing the Aircast AirSelect Elite’).
•Unfasten straps, remove front panel and open liner.
2. Position heel against back of the boot, then wrap foot flaps over
the foot and toe cover over the toes.
3. Replace front panel. Position so that:
•Aircast logo is over the toes.
•Foot panel is positioned inside the boot.
•Upper part of front panel remains outside the boot.
4. Secure straps from bottom to top (A, B & C).
Tighten until the boot feels snug and comfortable.
5. Adjust Aircell compression:
Begin inflation on injured side first. Turn the selector dial located on
right-side of the boot to the appropriate number
•Number 1 inflates right-side aircell.
•Number 2 inflates left-side aircell.
•Number 3 inflates back aircell.
6. To inflate aircell, press and slowly release LARGE inflation pump
located on top right-side of boot.
•Ensure you cover the tiny hole with your finger when pressing the pump.
•Pump until aircell feels snug but comfortable.
•Repeat process to inflate other aircells, inflating Number 3 last.
•In the event of over-inflation, deflate aircells
(see instructions on next page).
•Once all aircells are inflated, turn selector dial to
“lock” position. This prevents accidental deflation.
REMOVING THE AIRCAST
AIRSELECT ELITE
•Deflate aircells before removing boot for proper fit when reapplying.
1. To deflate aircell Number 1, turn the selector dial to Number 1.
Press and hold finger on SMALL release button located on top right-
side of boot. Deflate until pressure is comfortable.
2. Repeat deflation process for aircells 2and 3, by turning selector dial to
appropriate number.
3. Undo the 3 straps (the order is unimportant).
4. Remove front panel and open liner, before removing leg from the boot.
PRECAUTIONS
•Do not over-inflate aircells.
•Check your skin frequently for “hot spots” and skin irritation. If you see
any skin changes or feelings of discomfort, reduce the aircell compression.
•Consult a medical professional if you are concerned about
any symptoms.
•Do not use the boot if you cannot feel sensations, whether due to
post-op anaesthesia, nerve, skin or other conditions.
NOTES
•Higher pressure provides more support when walking, lower pressure is
more comfortable when sitting or reclining. Pressure can also be
adjusted by tightening or loosening the straps.
•If on an airline flight, deflate cells and loosen straps.
•Use caution when walking on slippery or wet
surfaces to avoid injury.
For further information,
see product Instructions For Use.
FOOT AND ANKLE
 
 
 
C
B
A