Airflow 7005A User manual

F1763/02
FOR SERVICE
Please contact the installer if service is required for this product. If the installer is not known contact
Clipsal National Customer Service on the following numbers:
Tel 1300 2025 25
Fax 1300 2025 56
WARRANTY
The benefits conferred by this warranty are in addition to all other rights and remedies in respect of the
product which the consumer has under the Trade Practices Act and similar State and Territory laws.
The original purchaser of this Airflow Window Exhaust Fan is provided with the following warranty,
subject to the following conditions. Clipsal Australia Pty Ltd warrant this product for a period of three
years from the date of purchase for all parts defective in workmanship or materials. All defective
parts will be replaced free of charge. The following exclusions do not preclude the purchaser from
those statutory rights consumers have under the Trade Practices Act or similar State and Territory laws.
WARRANTY CONDITIONS
1. This warranty is only valid for appliances installed according to the manufacturer’s instructions.
2. This appliance must not be modified or changed in any way.
3. All wiring must be carried out by a licensed electrician or similarly qualified person and must be
connected to the voltage requirements as specified in the ratings label.
4. The manufacturer does not accept liability for any direct or consequential damage, loss or
other expense arising from misuse or incorrect installation and operation of the appliance.
5. Warranty will only be given on appliances where proof of purchase date is provided eg. original
invoice or copy.
As a record of your purchase, please fill out the following details and file this information with your
purchase invoice.
Airflow Model Number: ______________________________________________________________
Serial Number:_____________________________________________________________________
Purchased From: ___________________________________________________________________
Date of Purchase: __________________________________________________________________
Installation Instructions
MaxAir Window
Exhaust Fans
7005A
7007A
CLIPCOM18998
Clipsal Australia Pty Ltd reserves the right to change specifications,
modify designs and discontinue items without incurring obligation
and whilst every effort is made to ensure that descriptions,
specifications and other information in this catalogue are correct, no
warranty is given in respect thereof and the company shall not be
liable for any error therein.
© Clipsal Australia Pty Ltd.The identified trademarks and copyrights
are the property of Clipsal Australia Pty Ltd unless otherwise noted.
Product of Clipsal Australia Pty Ltd
A member of Schneider Electric
Contact us: clipsal.com/feedback
National Customer Care Enquiries:
Tel 1300 2025 25
Fax 1300 2025 56
clipsal.com

• Cutholeinglass212mmØ±2.0mm.
• Locateinternal clamp sub-assembly
“A”, slide over your arm as shown.
• Locateexternal clamp sub-assembly
“B”, fold and insert through the hole in the
window pane.
“A” Internal clamp
sub-assembly
“B” External clamp
sub-assembly
• Makesuretheexternalsealisagainstthe
glass, align and insert the bolts.
• Brassnutssuppliedshouldbeconnected
and finger tightened only.Finger
tighten
only
Apply soap to
the foam seal
Fan assembly
• Ifrequired,applyliquidorsimilarsoap
tofoamsealoninsideofexternalclamp
sub-assembly.
• Carefullyslidecylindricalwindow
grille outlet end of fan assembly
through opening.
• Withscrewsprovided,attachfanassembly
to window clamp assembly (four places).
Break tab for
cable access
Screws labelled 1, 2, 3 retain the
terminal cover to the chassis
• Removeterminationcover(screws
labelledwith1,2,3).Electriciantomake
electricalconnection.(3coreex,
7mmØ[17/64”]specied).
• Strippedendstobekepttoaminimum.
• Cable(3coreex)tobeplacedasshown
below in wiring diagram.
• Replaceterminationcover.
• Placecoverassemblyasshown.
• Tightenretaining screw.
• Test.Readytogo.
Retaining
screw
• Thisapplianceisnotintended
for use by children or infirm
persons without supervision.
• Childrenshouldbesupervised
to ensure they do not play with
the appliance.
• Fanshouldbemounted2.3m
abovetheoor.
• Applianceintendedforexterior
window mounting only.
1.
2.
3.
4.
5.
7005A & 7007A MaxAir Window Exhaust Fan Installation Instructions
© Clipsal Australia Pty Ltd © Clipsal Australia Pty Ltd
7005A & 7007A MaxAir Window Exhaust Fan Installation Instructions