Airlink101 Golden N AWLL6075 User manual

Golden N Wireless Mini USB Adapter
Model # AWLL6075
User’s Manual
Rev. 1.2

1
Table of Contents
1. Introduction ..............................................................................................................................2
1.1 Package Contents................................................................................................................2
1.2 Features...............................................................................................................................2
2. Install the Wireless Adapter .....................................................................................................3
3. Connect to the Wireless Network.............................................................................................8
4. Configure Wireless Monitor...................................................................................................15
4.1 General..............................................................................................................................15
4.2 Profile Settings .................................................................................................................16
4.3 Available Network............................................................................................................18
4.4 Status ................................................................................................................................19
4.5 Statistics............................................................................................................................20
4.6 Wi-Fi Protected Setup (WPS)...........................................................................................21
4.7 Configuring Wireless Security .........................................................................................26
4.8 Ad-hoc and Peer-to-Peer Wireless Networks...................................................................31
4.9 About................................................................................................................................33
Appendix A - Specification........................................................................................................34
Technical Support.......................................................................................................................35

2
1. Introduction
Congratulations on your purchase of the Golden N Wireless Mini USB Adapter. The
super compact mini design gives you more flexibility and its high bandwidth combined
with extended wireless coverage delivers fast and reliable connection for all of your
networking applications. The adaptor will yield a higher throughput is it is used with
other Airlink101® Wireless N products.
A full range of security features such as WEP, WPA-PSK, and WPA2-PSK will provide
you the highest level of wireless network security. The bundled wireless utility allows
you to set up the adapter with an easy-to-use user interface. The Golden N Wireless
Mini USB Adapter works with 802.11g and 802.11b network devices ensuring
compatibility with your existing wireless products.
1.1 Package Contents
Before you begin the installation, please check the items of your package. The
package should include the following items:
•Golden N Wireless Mini USB Adapter
•Quick Installation Guide
•Installation CD (Driver/Utility/Manual)
1.2 Features
•Higher data rate and broader coverage with Wireless N technology
•Built-in Easy Setup Button for easy connection to the existing wireless network
•WPA2, WPA, and WEP enhanced security to provide a full protection for your
wireless connection
•Great for environments that need higher wireless data traffic
•Fully backward compatible with 802.11b/g
•Light-weight, super compact mini design
•RoHS compliant

3
2. Install the Wireless Adapter
This section provides instructions on how to install the Golden N Wireless Mini USB
Adapter. The driver is installed along with the utility. For Windows 7, only driver will be
installed.
For Macintosh users, you can find the software and installation instructions for MAC
under the MAC folder on the provided CD.
Step 2.1 Insert the USB adapter into an available USB port of the computer.
Step 2.2 Click Cancel to quit the wizard.
Windows 2000/XP Users:
Windows Vista/7 Users:

4
Step 2.3 Insert the Installation CD into your CD drive. When the autorun screen pops
up, select Install Utility and Driver from the menu.
Windows 2000/XP Users:If the Autorun screen doesn’t appear automatically, go to
Start, Run, and type D:\Utility\Setup.exe (where D is the letter of your CD drive) and
click OK.
Windows Vista/7 Users:When you get a warning message make sure you click
Allow to give permission to continue with the installation of the driver software.

5
Step 2.4 The Airlink101 WLAN Monitor screen will popup. Click Next at the screen.
Step 2.5 Click Install to begin the installation.

6
Step 2.6 Give Permission to Windows to install the driver software.
Windows Vista/7 Users:Click the Install this driver software anyway button.
Windows 2000/XP Users:Click Continue Anyway at the Windows Logo Screen.

7
You will see the following screen when Windows is installing the driver for Airlink101
Wireless Adapter and the Airlink101 Wireless Monitor.
Step 2.7 Click Finish to complete the installation.

8
Step 2.8 Select Yes, I will restart my computer now. Click Finish to reboot the
computer.
The driver and utility have been installed successfully. Please continue to the
next chapter.

9
3. Connect to the Wireless Network
This section describes how to connect your wireless adapter to a wireless network.
For Windows 7 Users:
You will need to use the utility built in Windows 7 to manage this wireless USB adapter.
Currently, Airlink101 Wireless Monitor does not support on Windows 7.
Step 3.1 Click on the wireless icon in the system tray at the bottom right-hand corner
of your screen. A list of available network will pop up. Select the one you want to
connect to and click Connect.
Step 3.2 Enter the network security key if the wireless network you are attempting to
connect to has wireless encryption enabled. Click OK. The connection should be now
established.

10
For Windows Vista/XP/2000 Users:
Step 3.1 Open the Airlink101 Wireless Monitor utility by double clicking on the icon in
the system tray at the bottom right-hand corner of your screen.

11
Step 3.2
The Easy Setup Button (Wi-Fi Protected Setup) is a new and easy way to configure
the encryption for your wireless network clients. In order to use it, you need to have a
router that supports this feature.
Note: If your router doesn’t support Easy Setup Button function (Wi-Fi Protected
Setup), please go to Step 3.3.
1. Push the Easy Setup Button of the Adapter.
The ‘Wi-Fi Protected Setup – PBC method’ window will popup to acknowledge you
the Adapter is starting to establish a connection.
2. Within the following 2 minutes, push the Easy Setup Button (WPS Button) on the
back of the Router. The picture shows Airlink101 AR675W Wireless N Green Router.

12
3. The router will now start to synchronize the encryption settings with the wireless
adapter. The connection will be established in few seconds. Continue to Step 3.5.
If the connection is not able to establish, continue to Step 3.3.
Step 3.3 Click the Available Network tab of the Wireless Monitor, select the wireless
network that you wish to connect to, and click Add to Profile.
If the network that you are attempting to connect does not have encryption enabled,
you will receive a warning about connecting to an unsecured network. Click OK to
complete the connection. Go to Step 3.5.
Step 3.4 Enter the wireless security key into the Network Key and Confirm Network
Key boxes. The wireless adapter will automatically detect the type of Network
Authentication and the Data encryption, so it is recommended to keep these settings
as they are. Click OK after you finished.

13
Please refer to the User’s Manual on the provided CD for instructions on configuring
the wireless network security settings.
Step 3.5 The connection should be now established. Under the utility Airlink101
Wireless Monitor, go to General tab to check the status of the connection. Verify that
IP Address, Subnet Mask and Gateway have valid numbers assigned to them
(instead of all 0’s). The Status should be Associated, and there should be green bars
next to Signal Strength and Link Quality.

14
Congratulations! You have now connected to the wireless network successfully.
Troubleshooting
1. If you cannot open the wireless monitor utility, make sure that the USB adapter is
inserted firmly into the USB port.
2. If you cannot connect to the wireless router, you may want to double check the
wireless security settings on the router. The network key you entered in Step 3.4 must
match with the settings on the wireless router.
3. If you are experiencing problems with the connection such as low signal strength,
slow connection speed, or unstable wireless connection, you can try to tune your
router’s signal by changing the channels on the router and/or by adjusting the direction
of the antenna(s). You do not need to change the channel on the Adapter; it will
automatically pick up the new channel after you reboot the router. Your router has 11
different channels to choose from. Keep going through the channels until you find one
that gives you a stable connection. For instructions on changing channels, refer to the
documentation that comes with the router.

15
4. Configure Wireless Monitor
This section describes the various functions of the Airlink101 Wireless Monitor that
you can configure, including the settings of wireless encryption.
4.1 General
The General tab provides you with the status of the current connection, including
signal, network name (SSID) and IP Address.
At the bottom you have options for controlling the utility and adapter.
Show Tray Icon allows you to show or hide the tray icon for the utility.
Radio Off disables the wireless function of the adapter.
Disable Adapter will completely disable the wireless adapter.

16
4.2 Profile Settings
The Profile tab lists the current profiles and allows you to create new profiles.
The Available Profile(s) box lists all the profiles that you’ve created for your network.
Profiles are automatically created and added to this list when you connect to new
networks. You can also manually add the profiles.
To modify an existing profile, select the profile from the Available Profile(s) box
and click on Edit.
To create a new profile, click on Add.
The Profile box will appear allowing you to specify the settings for your new profile or
to change settings for your existing profile.

17
Enter a Profile Name and SSID. Enter the encryption settings for the profile. Click
OK to save the changes.
The Configuring Encryption section (section 4.7) will give you the information of how to
set the different options of the wireless network encryption settings.

18
4.3 Available Network
The Available network tab lists all of the networks that the adapter detects in your area.
Clicking Refresh will refresh the list. To connect to a network, select a network from
the list and click Add to Profile.

19
4.4 Status
The status section provides you with a list of information about the current status of
the adapter.