Airlink101 AGIGACB User manual

Gigabit Cardbus Adapter
Model # AGIGACB
User’s Manual
Ver. 1A

2
Table of Contents
1. Introduction ..............................................................................................3
1.1 System Requirements.........................................................................3
2. Installing Hardware ..................................................................................3
3. Installing Driver ........................................................................................4
3.1 Windows 98SE....................................................................................4
3.2 Windows Me .......................................................................................7
3.3 Windows 2000 ....................................................................................9
3.4 Windows XP......................................................................................12
4. Verifying Installation...............................................................................14
5. Specifications.........................................................................................15
6. Technical Support..................................................................................15

3
1. Introduction
The Gigabit Cardbus Adapter comes with a 32-bit bus architecture and full-duplex
capability which allows for an unmatched high-speed network performance. By
providing smooth connections to 10 Mbps, 100 Mbps and Gigabit Ethernet
environments, the Gigabit Cardbus Adapter is the ultimate solution for the Cardbus
equipped laptops.
1.1 System Requirements
•Drivers provided with this product
•Cardbus PC Card compliant Card Services and Socket Services
•Gigabit, 100Base-TX Fast Ethernet, or 10BaseT Ethernet connectivity to your
local area network.
•Windows 98SE, Windows 2000, Windows Me, or Windows XP.
2. Installing Hardware
Step 1 Turn on the computer and wait for Windows to boot up.
Step 2 Insert the Cardbus firmly into the Cardbus slot with the LED indicators facing up.

4
Step 3 Connect one end of the Ethernet cable into an available switch/router port and
connect the other end of the cable into the RJ-45 port of the Cardbus.
Step 4 Follow the instructions in the next section to install the drivers.
3. Installing Driver
3.1 Windows 98SE
Step 1 At the Add New Hardware Wizard, click Next.

5
Step 2 Insert the provided Driver CD into the CD-ROM drive.
Step 3 Select Search for the best driver for your device (Recommended) and click
Next.
Step 4 Select Specify a location and click Browse. Browse to the CD-ROM drive and
select the Win98 folder. Click Next to continue.

6
Step 5 Click Next to install the driver.
Step 6 Insert the Windows 98SE CD and click OK to continue.
Step 7 Click Finish.
Step 8 Click Yes to restart the computer and complete the driver installation.

7
3.2 Windows Me
Step 1 At the Add New Hardware Wizard, select Specify the location of the driver
(Advanced) and click Next.
Step 2 Insert the provided Driver CD into the CD-ROM drive.
Step 3 Verify Search for the best driver for your device (Recommended) is selected.
Select Specify a location and click Browse. Browse to the CD-ROM drive and select
the WinMe folder. Click Next to continue.

8
Step 4 Click Next to install the driver.
Step 5 Click Finish to complete the installation.

9
3.3 Windows 2000
Step 1 At the Found New Hardware Wizard, click Next.
Step 2 Insert the provided Driver CD into the CD-ROM drive.
Step 3 Select Search for a suitable driver for my device (recommended) and click
Next.

10
Step 4 Select Specify a location and click Next.
Step 5 Browse to the CD-Rom drive and select the Win2000 folder and click OK.