AirLive WLAN-64GM Installation and operation manual

Ver. 1.0
Web Manual
WLAN-64GM
Enterprise Wireless Controller & Gateway
WLAN-128GM
Enterprise Wireless Controller & Gateway

2
CONTENTS
Chapter
1
Product Introduction
1
1.1
Package Contents WLAN
-64GM and WLAN-128GM
1
1.2
Product Specification WLAN
-64GM
2
1.3
Product Specification WLAN
-128GM
4
Chapter
2
Hardware Installation
6
2.1
WLAN
-64GM and WLAN-128GM Port description
6
2.2
WLAN
-64GM, WLAN-128GM Hardware installation
7
Chapter
3
Quick Installation Guide
8
3.1
WLAN
-64GM, WLAN-128GM , Web login Management
8
3.2
Initial Setup in the Web UI
8
3.3
Wizard
8
3.4
Wizard Wireless
9
3.5
Wizard Network WAN
9
3.6
Wizard Network LAN
10
3.7
Wizard Network Other
10
3.8
Starting Setup in the Web UI
11
Chapter
4
Configure the Wireless Controller
12
4.1
Main Home Page
12
4.2
Reboot and Password Change
13
4.3
Device
–AP List
14
4.3.1
AP List
- Position
14
4.3.2
AP List
-IP
14
4.3.3
AP List
- SSID
14
4.3.4
AP List
- Users
14
4.3.5
AP
–List Channel
15
4.3.6
AP List
–Config and Batch Config
15
4.3.7
AP List
–Config
16
4.3.8
AP List
–Config –Device Info
16
4.3.9
AP List
–Config –Wireless
17
4.3.10
AP List
–Config –Advanced
19
4.3.11
AP List
–Config - Other
20
4.3.12
AP List
–Batch Config
21
4.3.13
AP List
–Batch Config –Apply Template
21
4.3.14
AP List
–Batch Config –Country Code
22
4.3.15
AP List
–Batch Config –Reboot
22
4.3.16
AP List
–Batch Config –Reset
22
4.3.17
AP List
–Batch Config –Web Password
22
4.3.18
AP List
–Batch Config –Delete
22
4.4
Device
–Template
23
4.4.1
Device
–Template –Wireless
23
4.4.2
Device
–Template –Advanced
25
4.4.3
Device
–Template –Other
26
4.4.4
Device
–Template –List
26

4.5
Device
–Upgrade
27
4.6
Device
–Service
28
4.6.1
Device
–Service –IP List
28
4.6.2
Device
–Service –Static Binding
29
4.7
Device
–IPTV Settings
29
4.8
Device
–Auto Roaming
30
4.9
Network
31
4.9.1
Network
–LAN Setting
31
4.9.2
Network
–LAN Setting –IP List
32
4.9.3
Network
–LAN Setting –Static Binding
32
4.9.4
Network
–WAN Setting
33
4.9.5
Network
–WAN Setting - DHCP
33
4.9.6
Network
- WAN Setting - Static IP
34
4.9.7
Network
- WAN Setting - PPPoE
35
4.9.8
Network
–WAN Setting - Bypass
36
4.9.9
Network
- Cloud
37
4.10
User
38
4.10.1
User
- UserList
38
4.10.2
User
–Speed Limit
38
4.11
Firewall
40
4.11.1
Firewall
–IP Filter
40
4.11.2
Firewall
–MAC Filter
41
4.11.3
Firewall
–URL Filter
42
4.11.4
Firewall Port Map
43
4.11.5
Firewall
–DMZ
44
4.12
System
45
4.12.1
System
- Upgrade
45
4.12.2
System
–Maintain - Telnet
46
4.12.3
System
–Maintain –Reboot Regularly
46
4.12.4
System
–Maintain –DHCP Conflict Detection
47
4.12.5
System
–Maintain –Capture Packet
47
4.12.6
System
–Maintain - Ping
48
4.12.7
System
–Reboot
48
4.12.8
System
–System Log
49
4.12.9
System
–Manage –Backup Information
50
4.12.10
System
–Manage –Restore Settings
50
4.12.11
System
–Manage –Factory Settings
50
4.12.12
System
–Manage –DHCP Cache Cleanup
50
4.12.13
System
–System Time
51
4.12.14
System
–IP Group
52
4.12.15
System
–Time Group
53
4.12.16
System
- Accelerate
53

Userguide for WLAN-64GM, WLAN-128GM
1.1
Package Contents ofWDAP-C7210E
Package Contents ofWDAP-W1200E
Chapter 1. Product Introduction
PackageContents WLAN-64GM and WLAN-128GM
Before using this Wireless Controller, please check if there is anything missing in the package, and contact your dealer
of purchase to claim for missing items:
⚫WLAN-64GM or WLAN-128GM Wireless Controller
⚫Power Adapter (WLAN-6GM)
⚫Power Cable (WLAN-128GM)
⚫Mounting Ears
⚫InstallationGuide
-1-

-2-
1.2 Product Specification WLAN-64GM
Userguide for WLAN-64GM, WLAN-128GM
Model WLAN64GM Enterprise Gateway & Wireless Controller
Device Interface
•Main Chip: MTK MT7621
•Flash:16MB
•SSD:256MB
•Ethernet (LAN): 4 x RJ45 10/100/1000mbps
•WAN: 1x RJ-45 10/100/1000mbps
•Network Protocol: IEEE 802.3, 802.3u, 802.3ab,
TCP/IP, DHCP, ICMP, NAT, PPPoE, SNTP, HTTP,
DDNS, IPsec, PPTP, L2TP, CAPWAP Protocol
•Heat Dissipate: Super silent ball fan
•Power Input: 1 x 12VDC
•Power:AC:100-240V,50HZ
WAN
•WAN: PPPoE, DHCP, Static IP, Bypass mode
Firmware features
•AP Management:
Max to manage 64 PCS wireless AP
Centrally and remotely to manage/configure
wireless AP
AP Template deploy
View user’s status
Wireless Country Code
Reboot/Reset
Web Password
Delete AP
Online User List
AP Configure
•AP Template:
Device Add
Device Configure
Wireless Device
Wireless Frequency: 2.4G/5.8G
Encryption
VLAN ID
Virtual AP1~4
Country Code
Max Station
User Isolation
Short GI
Beacon Interval
Coverage Threshold
Fragment Threshold
RTS Threshold
Reboot Regularly
Device Web Password
Device Upgrade
Online upgrade
Local Upgrade
Firmware Upgrade
Device Service
AC Enable\Disable
DHCP Enable\Disable
Server IP Address
Address Count
Lease Time
Allocated IP
IP List
Static Binding
IPTV Setting
Enable IPTV mode
IPTV tags
Topology Graph
Device Auto Roaming
Auto Roaming
5G priority
Network
Lan Setting
IP Address
Subnet
DHCP Service
Start/End IP
Primary/Secondary DNS
DHCP Lease Time
DHCP Allocation Number
WAN Setting
Internet Access: DHCP/Static IP/PPPoE/Bypass
MTU
Line Detection
Cloud
Cloud Enable/Disable
Cloud Server
Latitude/Longitude
Binding State
User
User List
Link
Blacklist

-3-
Userguide for WLAN-64GM, WLAN-128GM
Model WLAN64GM Enterprise Gateway & Wireless Controller
User Speed Limit
One Key Enable/Disabled
IP Group
Time Group
Up/Down
Remake
•Firewall:
IP Filter
Rule Name
Protocol
TCP/UDP
IP Address
Search
External Port
Internal Port
MAC Filter
Name
Time Group
Mac Address
Search Mac Address
URL Filter
Name
Time Group
URL Address
Port Map
Name
Protocol
TCP/UDP
IP Address
Search
External/Internal Port
DMZ Host
DMZ IP Address
Search
•System:
System Time
Current version
Upgrade Type
Online Upgrade
Local Upgrade
Upgrade Time
Restore Default Configure
Upgrade
Maintain
Remote Login
Remote Telnet
Reboot Regularly
DHCP Conflict Detection
Capture packet
Network
Protocol
Source Address
Target Address
Target Port
Number
Ping
Environment
Working Temperature: -20℃~55℃
Storage Temperature: -40℃~ 70℃
Working Humidity: 5% ~ 97%RH (No condensation)
Dimension
Package Size: 50 x 28.5 x 8 cm
Carton Package: 10PCS / 1 CTN
Carton Weight: G.W=10KGS
Carton Size: 54.5 x 32.5 x 23.5 cm
Ordering Information
Model Name: AirLive WLAN-64GM
Description: Enterprise Gateway & Wireless Controller

-4-
1.3 Product Specification WLAN-128GM
Userguide for WLAN-64GM, WLAN-128GM
Model WLAN-128GM Enterprise Gateway & Wireless Controller
Device Interface
•Main Chip: MTK MT7621
•Flash:16MB
•SSD:256MB
•Ethernet (LAN): 4 x RJ45 10/100/1000mbps
•WAN: 1x RJ-45 10/100/1000mbps
•Network Protocol: IEEE 802.3, 802.3u, 802.3ab,
TCP/IP, DHCP, ICMP, NAT, PPPoE, SNTP, HTTP,
DDNS, IPsec, PPTP, L2TP, CAPWAP Protocol
•Heat Dissipate: Super silent ball fan
•Power Input: 1 x 12VDC
•Power:AC:100-240V,50HZ
WAN
•WAN: PPPoE, DHCP, Static IP, Bypass mode
Firmware features
•AP Management:
Max to manage 128 PCS wireless AP
Centrally and remotely to manage/configure
wireless AP
AP Template deploy
View user’s status
Wireless Country Code
Reboot/Reset
Web Password
Delete AP
Online User List
AP Configure
•AP Template:
Device Add
Device Configure
Wireless Device
Wireless Frequency: 2.4G/5.8G
Encryption
VLAN ID
Virtual AP1~4
Country Code
Max Station
User Isolation
Short GI
Beacon Interval
Coverage Threshold
Fragment Threshold
RTS Threshold
Reboot Regularly
Device Web Password
Device Upgrade
Online upgrade
Local Upgrade
Firmware Upgrade
Device Service
AC Enable\Disable
DHCP Enable\Disable
Server IP Address
Address Count
Lease Time
Allocated IP
IP List
Static Binding
IPTV Setting
Enable IPTV mode
IPTV tags
Topology Graph
Device Auto Roaming
Auto Roaming
5G priority
Network
Lan Setting
IP Address
Subnet
DHCP Service
Start/End IP
Primary/Secondary DNS
DHCP Lease Time
DHCP Allocation Number
WAN Setting
Internet Access: DHCP/Static IP/PPPoE/Bypass
MTU
Line Detection
Cloud
Cloud Enable/Disable
Cloud Server
Latitude/Longitude
Binding State
User
User List
Link
Blacklist

-5-
Userguide for WLAN-64GM, WLAN-128GM
Model WLAN-128GM Enterprise Gateway & Wireless Controller
User Speed Limit
One Key Enable/Disabled
IP Group
Time Group
Up/Down
Remake
•Firewall:
IP Filter
Rule Name
Protocol
TCP/UDP
IP Address
Search
External Port
Internal Port
MAC Filter
Name
Time Group
Mac Address
Search Mac Address
URL Filter
Name
Time Group
URL Address
Port Map
Name
Protocol
TCP/UDP
IP Address
Search
External/Internal Port
DMZ Host
DMZ IP Address
Search
•System:
System Time
Current version
Upgrade Type
Online Upgrade
Local Upgrade
Upgrade Time
Restore Default Configure
Upgrade
Maintain
Remote Login
Remote Telnet
Reboot Regularly
DHCP Conflict Detection
Capture packet
Network
Protocol
Source Address
Target Address
Target Port
Number
Ping
Environment
Working Temperature: -20℃~55℃
Storage Temperature: -40℃~ 70℃
Working Humidity: 5% ~ 97%RH (No condensation)
Dimension
Package Size: 50 x 28.5 x 8 cm
Carton Package: 5PCS / 1 CTN
Carton Weight: G.W=9KGS
Carton Size: 50.5 x 43.5 x 34.5 cm
Ordering Information
Model Name: AirLive WLAN-128GM
Description: Enterprise Gateway & Wireless Controller

-6-
Chapter 2. Hardware Installation
2.1 WLAN-64GM and WLAN-128GM Port description.
LED Status Function
PWR
On
( Green )Wireless Controller is powered on
Off
System is off
Run
Blinking (Green)
Wireless Controller is working
Off
No traffic
WAN/LAN
Blinking
Cable connected and Data Transfer
LED Description.
Port Description.
Port Description
12V DC
12V
DC port for WLAN-64GM only
WAN
WAN
port connecting to Modem or Router
LAN 1~4
LAN
port connecting to the network equipment.
Reset
To
restore to the factory default setting, press and hold the Reset Button for
about 1
0 seconds, and then release it.
WLAN-64GM
Userguide for WLAN-64GM, WLAN-128GM
WLAN-128GM

-7-
2.2 WLAN-64GM, WLAN-128GM Hardware installation.
Connect the Wireless Controller via the WAN port to an Internet connection via a Modem or Router.
To control the Access Points connect them direct to the LAN ports of the controller via a (PoE) Switch.
The AirLive TOP-12AC, TOP-18AX and inWall-U618 as well as several outdoor CPE models are support by the Wireless
controller.
Userguide for WLAN-64GM, WLAN-128GM

This chapter will show you how to configure the basic functions of your Wireless Controller within minutes.
-8-
Chapter 3. Quick Installation Guide
3.1 WLAN-64GM, WLAN-128GM , Web login Management.
TCP/IP Configuration.
The default IP address of the Wireless Controller is 192.168.10.1. By default, the Wireless Controller has DHCP turned
on and the device will give out IP addresses directly when a computer is connected to the LAN ports. No additional
setup has to be done.
Userguide for WLAN-64GM, WLAN-128GM
3.2 Initial Setup in the Web UI.
Input 192.168.10.1 into the browser, when this the first the time setup the Setup Wizard will start.
Enter your own new Username and Password to start using the Wireless controller
3.3 Wizard
Continue with the Wizard or press Skip to go directly to the Home Page of the Wireless Controller.

-9-
Userguide for WLAN-64GM, WLAN-128GM
3.4 Wizard Wireless
The settings which are entered in this field will be used as the default template for all the Access Points which will be
connected to the Wireless Controller. Select Enable or Disable the wireless status, Enter your SSID name and wireless
encryption.
3.5 Wizard Network WAN
For the WAN setup select the Internet Access type for your connection, this can be DHCP, Static IP, PPPoE or Bypass.
Or press Scanning Access Mode to automatically select the Internet Access.

-10-
Userguide for WLAN-64GM, WLAN-128GM
3.6 Wizard Network LAN
Change the LAN IP address of the Wireless Controller as well as the Start and End IP Address range and the DNS.
3.7 Wizard Network Other
The Wireless Controller can automatically reboot on a fixed time. Select to Enable or Disable this function. After this
select the Reboot Time and the Reboot Interval.

-11-
Userguide for WLAN-64GM, WLAN-128GM
3.8 Starting Setup in the Web UI.
It is easy to configure and manage the Wireless Controller with a web browser. Input 192.168.10.1 into the browser (
When you changed the default IP address of the Wireless Controller in the Wizard, please use your new IP Address),
When the Wireless Controller has been setup using the Wizard enter your own new Username and Password.
When you clicked Skip in the Wizard setup, you would go directly to the Home Page of the Wireless Controller but
with the next login the main login page as below will be shown.
To change the language settings from English to Spanish click on the “˅" to open the menu.

The page includes the following fields:
-12-
Chapter 4. Configure the Wireless Controller
4.1 Main Home Page.
The below web GUI and the topology used in this guide uses the WLAN-128GM as an example.
It is easy to configure and manage the Controller with the web browser. The Home Page of the Wireless Controller
shows an overview of the settings and several quick links.
Object
Description
Throughput
Shows the current status of the WAN port UP and Downstream graph
LAN
Shows the current LAN status and IP information
WAN
Shows the current WAN status and IP information
Device Position
You can enter the device description.
Memory
Current % of internal memory in use
CPU
Current CPU load
Version
Shows the current device firmware version.
Userguide for WLAN-64GM, WLAN-128GM
Quick Links
Click on the cog icon to directly go to the settings without going through the menu.
Quick Links
Click on the Blue, Green, Orange and Red Buttons to go direct to these settings, without going through the menu.

-13-
4.2 Reboot and Password Change
Click on the Green icon with the 4 squares in the top right corner and a pulldown menu will appear.
The first icon will start the Setup Wizard.
To change the Username, click on the person icon and enter your new Username.
To change the Password, click on the lock icon and enter your new Password.
To Reboot the Access Point, click on the last icon
Userguide for WLAN-64GM, WLAN-128GM

-14-
4.3 Device –AP List
AP list will show all the Access Points which are connected to the Wireless Controller. The Access Points will
automatically appear when they are set to on “Get IP from AC” in their webGUI. When multiple different models of
Access Points have been added they can be separated by model or by online/ offline devices.
By default, All Models are shown, click on the All Models button and a single model can be selected, now only Access
Points of the same model will be shown. Click on All Device to choose between Online and Offline device.
To search a selected Access Point enter it’s IP or MAC Address in the search field and the device will be displayed.
Userguide for WLAN-64GM, WLAN-128GM
4.3.1AP List - Position
Click on the pen icon to change the name of the Access Points
4.3.2AP List - IP
Click on the IP Address of the Access Point, the local webGUI of the Access Point will now open.
Note Wi-Fi changes which are made in the Access Point webGUI will be overruled by the Wi-Fi settings of the Wireless
controller.
4.3.3AP List - SSID
When the Lock icon is closed the SSID is using encryption, when the Lock icon is open there is no encryption.
4.3.4AP List - Users
Click on the person icon to directly see which users are connected to the Access Point.

-15-
Userguide for WLAN-64GM, WLAN-128GM
4.3.5AP –List Channel
Click on the channel icon to see the Channel analyze of the both the 2.4 and 5.8Ghz. The straight red vertical line
shows the Channel which the Access Point is currently using.
4.3.6AP List –Config and Batch Config
There are two different config’s
Config: This is the setup up for the selected single Access Point, settings like SSID, Encryption, VAP and TX Power can
be setup in this menu.
Batch Config: When using this function settings can be applied to multiple Access Points in one go. These can be the
Wireless settings, Device Password, Reboot and Reset.

-16-
Userguide for WLAN-64GM, WLAN-128GM
4.3.7AP List –Config
Config: This is the setup up for the selected single Access Point, settings like SSID, Encryption, VAP and TX Power can
be setup in this menu. These settings overrule any settings which may have been done before in the webGUI of the
Access Point.
4.3.8AP List –Config –Device Info
Device Info: This is an overview page which will display the current settings of the Access Point.

-17-
Userguide for WLAN-64GM, WLAN-128GM
4.3.9AP List –Config –Wireless
In Wireless setting you can setup the 2.4Ghz and 5Ghz setting
The 2.4Ghz settings are first when you need to do the 5Ghz settings click on the pulldown menu of the device and
select 5Ghz.
Setup your own SSID, Encryption, Wi-Fi Password, Channel and VLAN