Air+Health Skye User manual

Quick Start
Plug power cord into Skye and
wrap any excess cord around
the base.
Lift Skye back up and place it
an open space to aid airflow.
Plug the power cord into a
power outlet and press the
power button (on back).
Lay Skye down on its side (avoid
laying on its face). Unscrew the
base cover (turn left).
Remove the PRO-Cell
filter from Skye.
Remove outer plastic bag from
PRO-Cell filter.
Remove the UVC lamp from
the box.
Hold the base of the lamp
and plug into Skye until you
hear a click.
Place the PRO-Cell filter back into
Skye and screw the cover back on
(turn right) until you hear a click.
Download the“air health IAQ”
app to complete set-up and
enable controls from your phone. FLIP OVER

READ SKYE USER MA N U A L
FOR FURTHER INSTRUCTIONS
ABOUT CONTROLS, SETUP,
AN D SAFETY.
Control Dial
turn & click
Manual Mode
On this setting, you set the fan speed and Skye
will not change speed.
Click to change modes.
Air Quality Indicator
0-500 scale, the number will
change colors to indicate different
levels of air quality. 0 is great air,
500 is hazardous.
Lamp Life
Color will change to alert when
the lamp needs to be replaced.
Filter Life
Color will change to alert when
the filter needs to be replaced.
Fan Level
On the home page, turning the
dial changes the fan level.
Settings
Turn all the way left until the
(cog) icon is selected and
click to enter settings.
Smart Mode
On this setting, you set the minimum fan
speed and Skye will automatically increase fan
speed if it measures poor air quality. The fan
will never decrease below this speed.
FLIP OVER