Air+Health Skye User manual

USER MANUAL
English
Please Read and Keep for Future Reference

Thank you
for choosing to buy an Air+Health air purier.
We BELIEVE in safe spaces.
We are DEDICATED to making the best air puriers
on earth to enable you to live your healthiest life.
We STRIVE to apply the best technology and
research into delivering you safe and clean air.
The latest version of this user manual can be found on
airhealth.com

1
Best PraccesCONTENTS
1 Best Pracces
2 Meet Your New Skye
4 Quick Start
6 Controls & Interface
8 Sengs
10 Air Quality Indicator
12 Alerts
13 Air+Health App
14 Care & Maintenance
16 Help & Support
18 Safety Precauons & Warnings
22 Warranty Informaon
24 Disclaimer
26 FCC Statement
Run Skye 24/7
For the highest eecveness, Skye should run all the me.
Give Skye Space
Skye will work in any room, but for it to purify the most air,
it needs space around it, away from walls and furniture to
help maximize its airow.
Skye is designed for large rooms such as living rooms,
large bedrooms, and open oor plans.
Treat Skye Well
Skye requires a new lter about every six months and a
new UVC lamp every year to perform at its best.
Sign up to automacally receive your replacement lters
and lamps at airhealth.com/skye

32
Meet Your New Skye
Unit:
A Control Dial
B User Interface Screen
C Clean Air Exit
D Power Buon
E VOC & Parcle Sensor
F Power Connecon Port
G UVC Lamp
H PRO-Cell Filter
• Pre-lter
• Carbon
• HEPA
• PCO
A
D
F
G
C
E
H
B

54
Quick Start
Remove Packaging
Start Purifying Your Air
Lay Skye down on its
side (avoid laying on
its face). Unscrew the
base cover (turn le).
Skye will turn on
aer the power
buon is pressed.
Remove the PRO-Cell
lter from Skye.
Download the Air+Health app to complete
set-up and enable controls from your phone.
Remove outer
plasc bag from
PRO-Cell lter.
1
10
2
11
3
Plug In and Power On
Plug power cord into
Skye and wrap any
excess cord around
the base.
Li Skye back up
and place in an open
space to aid airow.
Plug the power cord
into a power outlet
and press the power
buon (on back).
7 8 9
Install Lamp and Filter
Remove the UVC
lamp from the box.
Hold the base of
the lamp and plug
into Skye.
Place the PRO-Cell lter
back into Skye and screw
the cover back on (turn
right) unl it clicks.
4 5 6
ALWAYS DISCONNECT POWER BEFORE PERFORMING ANY MAINTENANCE
SUCH AS REPLACING THE FILTER AND/OR LAMP.

76
Controls & Interface
Home Screen:
A Air Quality Indicator
B Sengs
C Filter Life
D Fan Level
E Lamp Life
F Smart Mode
G Manual Mode
Color will change to alert when
the lter needs to be replaced.
0-500 scale, the number will
change colors to indicate
dierent levels of air quality.
Color will change to alert
when the lamp needs to
be replaced.
On this seng, you set
the minimum fan speed and
Skye will automacally
increase fan speed if it
measures poor air quality.
The fan will never decrease
below this speed.
On the home page, turning
the dial changes the fan level.
Turn all the way le unl the
(cog) icon is selected (white)
and click to enter sengs.
B
A
F
CE
D
G
Active Fan Speed Change
On this seng, you set
the fan speed and Skye will
not change speed.

98
WiFi is ON
Skye is NOT
connected to
WiFi.
WiFi is ON
Skye is
connected to
WiFi.
WiFi is OFF
Skye is NOT
connected to
WiFi.
1. Return Home
This is the rst page in
sengs, clicking here
will return you to the
home dashboard.
2. WiFi Status & Control
This page displays WiFi
connecvity status.
Clicking here will open
WiFi pairing and WiFi
on and o.
Sengs
Child Lock
Click and hold on any
screen to acvate the
child lock; click and hold
again to deacvate.
Clicking on the cog icon will take you to
Sengs, scroll between pages and click to
control Skye’s WiFi, lamp, and lter status.
3. Lamp On/O
Clicking on this page
will turn the UVC lamp
on and o.
4. Filter Life
This page shows
how much lter life
is remaining.
Click here when you
replace your lter to
reset the lter life.
5. Lamp Life
This page shows
how much lamp life
is remaining.
Click here when you
replace your lamp to
reset the lamp life.
Entering Settings
There are four dierent lter
life levels. Green is good and
red is very low.
There are four dierent lamp
life levels. Green is good and
red is very low.

1110
50 100 150 200 300 500
Air Quality Indicator
Moderate
(51-100)
The air quality is
moderate, keep Skye
running or use Smart
Mode to clean your air
more eciently.
Good
(0-50)
The air quality is
good, keep Skye
running to maintain
this level of air quality.
Poor
(101-150)
The air quality is
poor, turn the fan
level up or use Smart
Mode to return your
air to a healthy level.
Unhealthy
(151-200)
The air quality is
unhealthy, turn the
fan level up higher or
turn Skye to Smart
Mode so it can clean
things up for you.
Very Unhealthy
(201-300)
The air quality is very
unhealthy, turn the fan
level up all the way
or turn Skye to Smart
Mode to neutralize
your air!
Hazardous
(301-500)
The air quality is
hazardous, turn the fan
level up all the way or
turn Skye to Smart
Mode to save your air!
The sensor and air purier are not medical devices and the informaon they provide is not
intended to diagnose, treat, cure, or prevent any disease or condion. Consult your doctor if you
are unsure what levels of parculate maer are safe for you and visit www.airnow.gov for more
informaon on parculate maer and all aspects of air polluon.

1312
Download the Air+Health App
Download the Air+Health App from the App Store or
Google Play. Open the app, register your new device, and
follow the on-screen instrucons to set up a new account.
Note:
Connecng Skye to WiFi will enable lter and lamp status
indicators on the device and in the app. This will help you
track when your Skye needs a new lter or lamp.
Alerts Air+Health App
Lamp Life is Low
This means your lamp
life is very low and it
is me to replace.
Click “x” to ignore or
“reset” aer you
change the lamp.
E2: Error Code
Please reset the device by
powering o the device,
unplug the power cord, and
wait 10 seconds. Plug the
power cord back into the
wall and power on the
device. If the warning symbol
persists, please contact
customer service.
Filter Life is Low
This means your lter
life is very low and it
is me to replace.
Click “x” to ignore or
“reset” aer you
change the lter.
Check Lamp
This means the lamp
is not fully plugged in.
Unplug Skye and open
the base to check that
the lamp is properly
plugged in.
Lamp Malfuncon
This means the lamp
has malfunconed.
Conrm the lamp is
installed correctly. If
this persists, the lamp
may need to be
replaced.
ALWAYS DISCONNECT POWER BEFORE PERFORMING ANY MAINTENANCE
SUCH AS REPLACING THE FILTER AND/OR LAMP.

1514
Care & Maintenance
Replacing the Filter
Replacing the Lamp
Unplug Skye and lay
it down on its side.
Unscrew the base
cover (turn le).
Re-insert the new
lter and close the
base cover (turn right).
Re-insert the lter
and close the base
cover (turn right).
Remove the old
UVC lamp from
Skye and recycle it.
Remove the old
PRO-Cell lter
from Skye.
Plug Skye back in and reset the lter
life in sengs or on the app.
Reference Quick Start secon on how to
plug Skye in and power on.
Plug Skye back in and reset the lamp
life in sengs or on the app.
Reference Quick Start secon on how to
plug Skye in and power on.
Remove the new
UVC lamp from
its packaging.
Remove any
packaging from the
new PRO-Cell lter.
Holding the base,
plug the new lamp
into Skye.
1 4
41
2 5
52
3
3
ALWAYS DISCONNECT POWER BEFORE PERFORMING ANY MAINTENANCE
SUCH AS REPLACING THE FILTER AND/OR LAMP.