Air+Health Skye User manual

Set-up Your Skye
Plug power cord into Skye
and wrap any excess cord
around the base.
Li Skye back up and place it
an open space to aid airflow.
Plug the power cord into a power
outlet and tap the power buon
(on back).
Lay Skye down on its side
(avoid laying on its face).
Unscrew the base cover
(turn counterclockwise).
Remove the PRO-Cell filter
from Skye.
Remove outer plasc bag
from PRO-Cell filter.
Remove the UVC lamp
from the box.
Hold the base of the lamp
and plug into Skye unl you
hear a click.
Place the "PRO-Cell" filter back into
Skye. Close the base cover by aligning
the arrows and then turning clockwise
into the locked posion. If the black
arow and the white dash are not
precisely aligned, the unit will not
turn on.
FLIP OVER FOR
HOW TO USE SKYE
Download the “air health IAQ”
app to complete set-up and
enable controls from your phone.

Control Dial
turn & click
Manual Mode
On this seng, you set the fan speed and Skye
will not change speed.
Click to change modes.
Air Quality Indicator
0-500 scale, the number will
change colors to indicate different
levels of air quality. 0 is great air,
500 is hazardous.
Lamp Life
Color will change to alert when
the lamp needs to be replaced.
Filter Life
Color will change to alert when
the filter needs to be replaced.
Fan Level
On the home page, turning the
dial changes the fan level.
Settings
Turn all the way le unl the
(cog) icon is selected and
click to enter sengs.
Smart Mode
On this seng, you set the minimum fan
speed and Skye will automacally increase fan
speed if it measures poor air quality. The fan
will never decrease below this speed.
READ SKYE USER MANUAL
FOR FURTHER INSTRUCTIONS
ABOUT CONTROLS, SETUP,
AND SAFETY.
FLIP OVER FOR
HOW TO SETUP GUIDE
How to Use
Lamp Life
WiFi Status Lamp On/Off
Filter Life
Your sasfacon is our priority! If you have any issues
when seng up your SKYE, please call our Customer
Service Team at 844-791-3466 or scan the QR code
for our support page.