AirTV Player Installation instructions

Let’s get started!
Warranty information can be found at AirTV.net/Warranty.
© 2017 AirTV L.L.C. AirTV Player is equipped with features to be used by people with hearing and
sight impairments. These features can be turned on during setup or from the Accessibility section in
the Settings menu. Additional information on these accessibility features can be found at
AirTV.net/Accessibility, or by calling Customer Support at 866-974-1354.
213578
Lost remote? No problem!
Press the Remote button on your Player
and your remote will begin beeping.
REMOTE
+
ANTENNA TIPS
Follow these tips to nd the right antenna and to get the best signal from it.
Selection
Visit AirTV.net/OTA to identify the
best type of antenna to purchase for
your home.
Placement
The higher, the better. Place your
antenna free from obstructions such
as oors, cabinets, walls, trees and
buildings.
Orientation
Visit AirTV.net/OTA to nd available
local channels and OTA tower
locations in your ZIP Code.
Coax Cable
Try a longer coax cable than you
think you need. Having a semi-loose
coil between the antenna and your
TV can improve signal quality.
Wireless Devices
Keep your antenna away from
WiFi devices or anything else lling
the airwaves with signals that the
antenna may perceive as noise.
Channel Rescanning
If you’ve followed the guidelines
above and you still have issues, try
rescanning for OTA channels.
If channels don’t appear after
rescanning, visit AirTV.net/Help for
assistance.
What’s included:
AirTV Player
Power Cable HDMI Cable
What you’ll need:
AirTV Adapter AirTV Remote
USB Extension Cable
Over-the-Air (OTA) Antenna
(sold separately)

Connect AirTV Player… to your
TV using the included HDMI cable.
Set up your OTA antenna…
by placing it in the best location
in your home. See Antenna Tips
for additional help.
Connect AirTV Adapter…
to your antenna using a coax
cable (not included).
Connect AirTV Adapter… to
AirTV Player directly or with the
included USB extension cable.
Connect to Internet… using
your own Ethernet cable from your
router. Or connect to your WiFi
network during on-screen setup.
Connect to power… and the
light on the front of the AirTV
Player will turn on.
Get the remote ready… by
pulling the plastic tab to activate
the batteries.
Complete on-screen setup…
by following the prompts, and
logging in to Sling TV and Google
(you can create an account during
setup if you need to).
– OR –
7
9
2
1 8
10
6
54
3
PULL
Scan for OTA channels…
by following the on-screen
prompts.
Start watching live OTA
channels! If you don’t see all
your OTA channels, visit
AirTV.net/Help.
Scanning...
First, set up your
AirTV Player
Next, set up your
AirTV Adapter
setup