Distributel Entone 500 User manual

HDMIIn
HDMIIn
HDMIOut
HDMIIn
HDMIIn
HDMIOut
HDMI HDMI
Setting up your TV Service
Place your Set-Top Box near your TV.
Connect the HDMI cable to your Set-
Top Box, then connect to an HDMI port
on your TV. (Note name of port you use.)
Connect an ethernet cable to the
LAN port on your Set-Top Box, then
connect the other end to a LAN port
on your internet modem.
If you use a router, connect it to a LAN
port on your router instead.
Attach the power cord to the Set-Top Box
and connect to a nearby electrical outlet.
Select ‘INPUT’ or ‘SOURCE’ on your TV
and ensure it matches the port selected
in Step 1.
123
Before you begin:
>Additional Resources
You can find additional
self-help resources at
distributel.ca/support.
>Review the contents of your install kit:
●Set-Top Box and power cord
●HDMI cable
●Remote control and 2 batteries
●2 ethernet cables
●2 Power Line Connectors
>Read through instructions
●Select the best set up option based on
location of your TV and modem.
●Ensure you follow the steps in order shown.
●Locate the necessary outlets in your home.
Follow these steps if your TV is NEAR your modem.
If your TV is not near your modem, follow steps on reverse side of this guide.
For tips on how to use theincluded PVR, remote control, electronic program guide,setting up parental controls and other helpful info,
check out the Support page of our website atdistributel.ca.
www.distributel.ca
After about 5 minutes, the Distributel
Guide will be displayed on your TV.
Entone 500
TV Set-Top Box Set Up Guide
After following these three easy steps, you can now press ‘menu’ on the remote and begin enjoying your TV service.
Distributel_Entone 500 TV Set-Top_Set Up Guide accordian fold.indd 2-4Distributel_Entone 500 TV Set-Top_Set Up Guide accordian fold.indd 2-4 2020-07-30 12:04 PM2020-07-30 12:04 PM

HDMIIn
HDMIIn
HDMIOut
HDMI HDMI
Place your Set-Top Box near your TV. Connect the HDMI
cable to your Set-Top Box, then connect to an HDMI port on
your TV. (Note name of port you use.)
1
Attach one ethernet
cable to your Set-Top
Box and then to the
bottom of a Power
Line Connector.
Plug the Connector into
a nearby electrical wall
outlet.
2
Setting up your TV Service
Follow these steps if your TV is NOT NEAR your modem.
www.distributel.ca
Attach second ethernet cable to a LAN port on your modem
or router, and then to the second Power Line Connector.
Connect the Power Line Connector to a nearby electrical
wall outlet.
3
For tips on how to use theincluded PVR, remote control, electronic program guide,setting up parental controls and other helpful info,
check out the Support page of our website atdistributel.ca.
Attach the power cord to the Set-Top Box and connect to a
nearby electrical outlet.
Select ‘INPUT’ or ‘SOURCE’ on your TV and ensure it matches
the port selected in Step 1.
After about 5 minutes, the Distributel Guide will be displayed
on your TV.
4
For information on our products and services,
visit distributel.ca
Contact our Customer Support team at 1-877-810-2877
TV service provided by TOTALTV.
After following these four easy steps, you can now press ‘menu’ on the remote and begin enjoying your TV service.
HDMIIn
HDMIIn
HDMIOut
Distributel_Entone 500 TV Set-Top_Set Up Guide accordian fold.indd 5-7Distributel_Entone 500 TV Set-Top_Set Up Guide accordian fold.indd 5-7 2020-07-30 12:04 PM2020-07-30 12:04 PM