Airwell AWSI-HGD009-N11 User manual

HGD 009/012 DCI Series
Indoor Units Outdoor Units
AWSI-HGD009-N11 AWAU-YGD009-H11
AWSI-HGD012-N11 AWAU-YGD012-H11
gt
REFRIGERANT
R410A HEAT PUMP
APRIL- 2012
SM HGD-009/012 1-A.1 GB
Version:1

LIST OF EFFECTIVE PAGES
A SM HGD-009/012 1-A.1 GB
LIST OF EFFECTIVE PAGES
Note: Changes in the pages are indicated by a “Revision#” in the footer of each effected page
(when none indicates no changes in the relevant page). All pages in the following list represent
effected/ non effected pages divided by chapters.
Dates of issue for original and changed pages are:
Original ....... 01 ........ April,2012
Total number of pages in this publication is 61 consisting of the following:
Page
No.
Revision
No. #
Page
No.
Revision
No. #
Page
No.
Revision
No. #
* Zero in this column indicates an original page.

TABLE OF CONTENTS
Service Manual – HGD-009/012 Revision 01 i
Table of Contents
1. INTRODUCTION............................................................................................................................. 1-1
2. PRODUCT DATA SHEET............................................................................................................... 2-1
3. RATING CONDITIONS ................................................................................................................... 3-1
4. OUTLINE DIMENSION ................................................................................................................... 4-1
5. PERFORMANCE DATA ................................................................................................................. 5-1
6. SOUND LEVEL CHARACTERISTICS ........................................................................................... 6-1
7. ELECTRICAL DATA....................................................................................................................... 7-1
8. WIRING DIAGRAM......................................................................................................................... 8-1
9. REFRIGERATION DIAGRAMS ...................................................................................................... 9-1
10. TUBING CONNECTIONS ............................................................................................................... 10-1
11. CONTROL SYSTEM....................................................................................................................... 11-1
12. TROUBLESHOOTING.................................................................................................................... 12-1
13. EXPLODED VIEW & SPARE PART LIST...................................................................................... 13-1

INTRODUCTION
1. INTRODUCTION
1.1 General
HGD series is a monosplit DCI inverter air conditioner designed for residential
buildings.
The ODU YGD009/012 product is a DC inverter outdoor with high technology. By
using DC compressor sine wave torque control technology, this product provides
more comfort and economical operating.
The IDU HGD-009/012 is a high-wall mounted type indoor with modern apperance.
Product is available in two Capcities 9000 and 12000 Btu/h.
1.2 Main Features
The unit benefits from the most advanced technological innovations, namely:
•DC inverter technology.
•R410A models
•Microprocessor control and indoor LED display
•High COP,Energy efficiency class A in cooling/heating mode
•Torque control for compressor running in lower Freqency but with low vibration
and little sound.
•Up to 10 m vertical high between indoor and outdoor units
•Cooling operation at outdoor temperature up to 48ºC.
•Heating operation at outdoor temperature down to -15ºC.
•Easy installation and service.
•Sleep mode from remote control to save energy
•ON/OFF timer and clock display
•Vertical auto swing with motorized flap (any position stop)
•Intelligent Deicing
•Memory from power failure
•Rapid cooling/heating
•I-Feel function
•Cold air prevention in heating
•Clean function (Blow dry)
•Multi speeds (7 speeds available for each mode)
•Self diagnosic (Error indications) for ease of maintenance
SM HGD-009/012 1-A.1 GB 1-1

INTRODUCTION
1-2 SM HGD-009/012 1-A.1 GB
•Air sterilization- by Cold plasma that generating Active Hydrogen Oxygen and
destory Bateria and Viruses.
1.3 Indoor Unit
The indoor unit is wall mounted, and can be easily fitted to many types of residential
locations. It includes:
•LED display
•Variable speed with PG motor
•Motorized flap
•High efficiency filtration to ensure a best Air Quality : Advanced filtering combine
mechanical, Photo-catalytic + Bi-anti bacterial and observe bad gaseous and
smokes.
•Air sterilization- by Cold plasma that generating Active Hydrogen Oxygen and
destory Bateria and Viruses.
1.4 Control
The microprocessor indoor controller, and an infrared remote control, supplied as
standard, provide complete operating function and programming.
Remote control RC08A：
Compact and economically design, it offers excellent user comfort. Combining modern
design with high technology, the RC8 remote control offers powerful functions of real
considering of user comfort and energy saving of air-conditioner .
For detail of functions, please refer to Appendix 1
1.5 Outdoor Unit
The outdoor units can be installed as floor or wall mounted units by using a wall
supporting bracket. The metal sheets are protected by anti- corrosion paint work
allowing long life resistance. All outdoor units are pre-charged. For further information
please refer to the Product Data Sheet, Chapter 2.
It includes :
•Compressor mounted in a soundproofed compartment :
•Axial fan.
•Outdoor coil with hydrophilic louver fins for RC units.
•Outlet air fan grill.
•Interconnecting wiring terminal block.

INTRODUCTION
1.6 Tubing Connections
Flare type interconnecting tubing to be produced on site.
For further details please refer to the Installation Manual.
1.7 Inbox Documentation
Each unit is supplied with its own installation, operation and remote control manuals.
1.8 Matching Table
INDOOR UNITS
AWSI-HGD009-N11 AWSI-HGD012-N11
OUTDOOR UNITS
AWAU-YGD009-H11
X
AWAU-YGD012-H11
X
SM HGD-009/012 1-A.1 GB 1-3

PRODUCT DATA SHEET
SM HGD-009/012 1-A.1 GB 2-1
2. PRODUCT DATA SHEET
2.1 HGD009 // YDD009
Model Indoor Unit
HGD 009
Model Outdoor Unit
Y
GD 009
Installation Method of Pi
p
e Flared
Characteristics Units Coolin
g
Heatin
g
Ca
p
acit
y
(
4
)
kW 2.60
(
1.00-3.40
)
2.87
(
0.60-3.80
)
Power in
p
ut
(
4
)
kW 0.645
(
0.2-1.20
)
0.695
(
0.16-1.25
)
EER
(
Coolin
g)
or COP
(
Heatin
g)
(
4
)
W/W 4.01 4.11
Ener
gy
efficienc
y
class AA
V 220-240
Ph 1
Power supply
Hz 50
Rated current A 2.9 3.1
Power factor 0.97 0.97
Prated
(
IDU+ODU
)
W 1450
Circuit breaker ratin
g
A 16A
Fan t
yp
e &
q
uantit
y
Crossflow x 1
Coolin
g
SH/H/M/L RPM 1400/1200/1100/1000/900/800/700
Fan speeds Heatin
g
SH/H/M/L RPM 1380/1250/1170/1090/1020/950/900
Air flow
(
1
)
SH/H/M/L m3/h
r
570/490/450/400/360/350/340
External static
p
ressure Min Pa 0
Sound
p
ower level
(
2
)
SH/H/M/L dB
(
A
)
48/44/42/39/37/35/32
Sound
p
ressure level
(
3
)
SH/H/M/L dB
(
A
)
38/34/32/29/27/25/22
Moisture removal l/h
r
0.8
Condensate drain tube I.D mm 16
Dimensions WxHxD mm 896x320x159
Net Wei
g
ht k
g
11.5
Packa
g
e dimensions WxHxD mm 973x403x255
INDOOR
Packa
g
ed wei
g
ht k
g
14.5
Refri
g
erant control Electrical Ex
p
ansion Valve
Com
p
ressor t
yp
e
,
model Rotar
y
–
LANDA QXA-A086zC190
Fan t
yp
e &
q
uantit
y
Pro
p
eller
(
direct
)
x 1
Fan s
p
eeds H RPM 900
Air flow H m3/h
r
1600
Sound
p
ower level H dB
(
A
)
60
Sound
p
ressure level
(
3
)
HdB
(
A
)
50
Dimensions WxHxD mm 776X540X320
Net Wei
g
ht k
g
29
Packa
g
e dimensions WxHxD mm 823X595X358
Packa
g
ed wei
g
ht k
g
33
Refri
g
erant t
yp
e R410A
Standard char
g
e k
g(
5m
)
0.85
Additional char
g
e 20
g
/m
(
5m<L<15m
)
Li
q
uid line In.
(
mm
)
1/4"
(
6.35
)
Suction line In.
(
mm
)
3/8"
(
9.53
)
Max.tubin
g
len
g
th m. Max. 15
OUTDOOR
Connections
between units
Max.hei
g
ht difference m. Max. 10
O
p
eration control t
yp
e Remote control
(1)Airflow in ducted units; at nominal external static pressure.
(2)Sound power in ducted units is measured at air discharge.
(3)Sound pressure level measured at 1-meter distance from unit.
(4)Rating conditions in accordance to ISO 5151 and ISO 13253 (for ducted units).

PRODUCT DATA SHEET
2-2 SM HGD-009/012 1-A.1 GB
2.2 HGD012 //YGD012
Model Indoor Unit
H
GD
012
Model Outdoor Unit
Y
GD 012
Installation Method of Pi
p
e Flared
Characteristics Units Coolin
g
Heatin
g
Ca
p
acit
y
(
4
)
kW 3.50
(
1.30-4.00
)
3.81
(
0.90-4.30
)
Power in
p
ut
(
4
)
kW 0.97
(
0.36-1.30
)
1.055
(
0.34-1.36
)
EER
(
Coolin
g)
or COP
(
Heatin
g)
(
4
)
W/W 3.61 3.61
Ener
gy
efficienc
y
class AA
V 220-240
Ph 1
Power supply
Hz 50
Rated current A 4.3 4.7
P
o
w
e
r f
ac
t
o
r 0.97 0.97
Pr
a
t
ed
(
ID
U
+
O
D
U)
W 1600
Circuit breaker ratin
g
A 16 A
Fan t
yp
e &
q
uantit
y
Crossflow x 1
Coolin
g
SH/H/M/L RPM 1400/1250/1150/1050/ 950/850/700
Fan speeds Heatin
g
SH/H/M/L RPM 1400/1270/1180/1100/1040/980/900
Air flow
(
1
)
SH/H/M/L m3/h
r
570/490/450/400/360/350/340
External static
p
ressure Min Pa 0
Sound
p
ower level
(
2
)
SH/H/M/L dB
(
A
)
49/46/44/41/38/35/33
Sound
p
ressure level
(
3
)
SH/H/M/L dB
(
A
)
39/36/34/31/28/25/23
Moisture removal l/h
r
1.4
Condensate drain tube I.D mm 16
Dimensions WxHxD mm 896×320×159
Net Wei
g
ht k
g
11.5
Packa
g
e dimensions WxHxD mm 973X403X255
INDOOR
Packa
g
ed wei
g
ht k
g
14.5
Refri
g
erant control Ca
p
illar
y
Com
p
ressor t
yp
e
,
model Rotar
y
–
PANASONIC 5RS102ZJA21
Fan t
yp
e &
q
uantit
y
Pro
p
eller
(
direct
)
x 1
Fan s
p
eeds H RPM 900
Air flow H m3/h
r
1600
Sound
p
ower level H dB
(
A
)
62
Sound
p
ressure level
(
3
)
HdB
(
A
)
52
Dimensions WxHxD mm 848X540X320
Net Wei
g
ht k
g
38
Packa
g
e dimensions WxHxD mm 881X595X363
Packa
g
ed wei
g
ht k
g
43
Refri
g
erant t
yp
e R410A
S
tandard
c
h
a
r
g
ek
g(
5m
)
1
Additional char
g
e 20
g
/m
(
5m<L<20m
)
Li
q
uid line In.
(
mm
)
1/4"
(
6.35
)
Suction line In.
(
mm
)
1/2"
(
12.7
)
Max.tubin
g
len
g
th m. Max. 20
OUTDOOR
Connections
between units
Max.hei
g
ht difference m. Max. 10
O
p
eration control t
yp
e Remote control
(1)Airflow in ducted units; at nominal external static pressure.
(
2
)
Sound
p
ower in ducted units is measured at air dischar
g
e.
(
3
)
Sound
p
ressure level measured at 1-meter distance from unit.
(
4
)
Ratin
g
conditions in accordance to ISO 5151 and ISO 13253
(
for ducted units
)
.

RATING CONDITIONS
3. RATING CONDITIONS
Rating conditions in accordance with ISO 5151 and ISO 13253 (for ducted units).
Cooling:
Indoor: 27oC DB 19oC WB
Outdoor: 35 oC DB
Heating:
Indoor: 20oC DB
Outdoor: 7oC DB 6oC WB
3.1 Operating Limits
R410A
Indoor Outdoor
Upper limit 32oC DB 23oC WB 48oC DB
Cooling Lower limit 21oC DB 15oC WB 10oC DB
Upper limit 27oC DB 24oC DB 18oC WB
Heating Lower limit 10oC DB -15oC DB -16oC WB
Voltage 1-PH 50Hz 198 – 264 V
SM HGD-009/012 1-A.1 GB 3-1

OUTLINE DIMENSION
4. OUTLINE DIMENSION
4.1 Indoor: HGD009/012
4.2 Outdoor: YGD009
SM HGD-009/012 1-A.1 GB 4-1