Airwell FLO 24 series User manual

CLIMATIZADOR SPLIT MURAL
ESPANOL
~
AIR CONDITIONER SPLIT WALL MOUNTED
ENGLISH
PROGRAMMING AND OPERATING MANUAL
MANUAL DE UTILIZACION Y DE PROGRAMMACION
AUTO

ENGLISH

INTRODUCTION
SYSTEM DESCRIPTION
MODES OF OPERATION, FUNCTIONS AND FEATURES
ON-UNIT INDICATORS AND CONTROLS
On-unit Operation
PROTECTION MODES
CARE AND MAINTENANCE
OPERATING TIPS
PRECAUTIONS
BEFORE CALLING FOR SERVICE

1
AUTO
Air Filtration.
Cooling.
Dehumidifying.
Heating.
Ventilation
INTRODUCTION
Dear customer:
The DC Inverter air conditioner you have purchased is one of the
most advanced units of its kind. The DC Inverter air conditioner is
a variable capacity air conditioner which uses high efficiency DC
motors for the compressor and the outdoor fan. Unlike other
models, it can adjust its capacity according to the user setting
and the environmental condition, thus saving up to 30% of the
seasonal power consumption, while keeping maximum comfort
level. This modern unit is also equipped with an ionizer (optional)
and an Electrostatic filter (optional) to maximize your indoor air
quality.
Detailed instruction as to the DC Inverter air conditioner (including
Single & Multi Split type) functions and way of operation are
provided in the following pages.
This Split Air Conditioner is designed for versatile application:
OPERATING TEMPERATURE
RANGE:
IMPORTANT NOTICE:
This air conditioner must be
grounded to protect against
electrical shock.
Installation of the air conditioner
must be performed by an
experienced air conditioning
installer, observing good
refrigeration practice.
Electrical connections and power
cord replacement should only be
made by authorized electricians
and in accordance with electrical
regulations and local codes. The
applicance must be positioned so
that the plug is accessible.
Failure to comply with the
manufacturer's installation and
operation instructions could affect
the performance of the air
conditioner and the validity of the
warranty.
Test Mode
Test Mode is set only for
performance testing purposes,
and not for user operation. Test
mode can be initiated by either
one of the following conditions:
1) Operating the unit with the
following remote control settings
and temperature conditions:
Cool Mode, SPT=16 and
RAT=27 1
OAT=35 1 for 30 minutes;
Heat Mode, SPT=30 and
RAT=20 1 ,
OAT=7 1 for 30 minutes. 2)
Entering Diagnostics with
Cool/SPT=16 or
Heat/SPT=30 .

2
9
10
11
12
13
14
AUTO
1
2
3
4
5
6
7
8
16 17
15

3
Designed to create comfortable sleeping conditions. When in COOLING mode,
the temperature rises one degree centigrade after each consecutive hour, up
to three hours, from the start of the mode. The temperature rise prevents the
feeling of over-cooling while sleeping (when your body is at rest). In HEATING
mode the reverse occurs; the air conditioner lowers its temperature one degree
every hour, up to three hours, from the start of the mode. When in SLEEP mode,
the air conditioner will be automatically turned off after operated for seven hours.
The result is a more comfortable and invigorating sleep, which leaves you feeling
fresh and energetic in the morning.

4
Filter indicator on the indoor unit display is turned on when the filter requires
cleaning. After cleaning and reinstalling the filter, It should be reset.
Automatic swing of Horizontal air flow in Horizontal direction. The flap move
automatically in right and left direction to spread the conditioned air evenly
throughout the room.

5
A. Stand-by Operation indicator
Lights up in red when
connected to power. Lights up
in green during operation.
B. ESF/ Ionizer/Fresh air indicator
Lights up during the ESF
or lonizer or Fresh air operation.
(optional)
C. LCD operation display
D. Timer indicator
Lights up during timer
and sleep operation.
E. Filter indicator
Lights up when air filter
requires cleaning.
F. Signal receiver
Receive signals from the
remote control.
G. Ionizer indicator
Lights up during ionizer
operation
H. Ionizer on/off switch
Used to switch the ionizer
on/off.
I. Electrostatic filter operation
button
Used to switch the Electrostatic
filter on or off
J. Cooling indicator
Lights up only when Mode (M)
is pressed.
K. Reset button
Press to turn off the filter
indicator and to reset the
filter function, after the
cleaned filter has been
reinstalled.
Press to cancel the buzzer
announcer.
L. Heating indicator
Lights up only when Mode (M)
is pressed.
M. Unit mode button
Used to switch the unit off or
to turn it on for cooling or
heating without the remote
control.
N. Electrostatic filter safety button
Turn off the Electrostatic filter
when you open the grille.
I
J
K
COOL
ESF-EN
RESET
HEAT
MODE
ESF-PWR
L
M
N
BCDEF
GH
A
If the air-conditioner can not be operated by the Remote
Control unit, it can be turned on for cooling or heating, or
completely turned off, by pressing MODE button (M) on the
air-conditioner. The MODE button will change the operating
status of the unit between - COOLING - HEATING -STAND BY
positions. Every time MODE button (M) is pressed, (J) or (L)
will light up respectively, to indicate in which mode the
air-conditioner operates.
On-unit Operation

7
AUTO
AUTO
K
The electronic filter should be removed from the unit
and cleaning once three month. The procedure is shown
as following:
The air purifying filter should be removed from the