Airwell XLM30RCB User manual

-+
TEMP
6
AIR CONDITIONER SPLIT WALL MOUNTED
PROGRAMMING AND OPERATION MANUAL
INSTALLATION INSTRUCTIONS
XLM30 &32 RCB/ GC30 &32RCC

Introduction
System Description
Modes of Operation, Functions and Features
Use of Wireless Remote Control
On-unit indicators and controls
Remote Control
Operation procedure
Turning on the Air Conditioner
Ventilating Operation
Cooling Operation
Cooling Operation with Auto Fan Mode
Heating Operation
Heating Operation With Auto Fan Mode
Auto Cooling / Heating Operation
Dry Operation
Selecting The Temperature
I FEEL/ROOM Temp Function
Sleep Function
Timer Operation
Timer Operating Modes
Air Flow velocity and Diretion Adjvstment
Turning off the Air Conditioner
Current Clock Time Set
Lock Function
Ionizer/Fresh Air Operation
Protection Modes
Care and Maintenance
Operating Tips
Precautions
Before Calling For Service
1
2
3
5
6
7
8
8
8
8
8
8
8
9
9
9
9
9
10
11
14
14
14
14
15
16
17
18
19
14
If your air conditioner is for
cooling only, please
disregard the heating
instructions
Please read these instructions
before operating the air
conditioner
CONTENTS

The air conditioner is designed for various uses:
Cooling in summer
Dehumidifying at high humidity conditions
Heating
Ventilation
Operating Temperature Range
The air conditioner must be
grounded to protect against
electrical shock.
Installation of the air
conditioner must be
performed by an experienced
air conditioning installer
observing good refrigeration
practice.
Electrical connections and
power cord replacement
should only be made by
authorized electricians and in
accordance with electrical
regulations and local codes.
Failure to comply with the
manufacturer s installation
and operation instructions
could affect the performance
of the air conditioner and the
validity of the warranty.
IMPORTANT NOTICE:
'
INTRODUCTION
Cooling: OO
21 43 C
Heating: OO
-7 21 C
(According to T temperature condition)
1
1

7
8
1918 20
15
17
16
12
14
13
11
10
9
3
5
6
4
2
1
-+
TEMP
1. Air intake grill
2.Air filter
3.Supply air flap
4.Air outlet
5.unit's indicater
6.Horizontal Air flow
Deflecting louvers
7.On unit's controls
8.Power cord
9.Outdoor unit air intake
10.Power cable
11.control wire
12.Liquid line
13.Suction line
14.drain hose
15.outdoor unit air outlet
16.Remote controls holder
17.Remote control
18.Ionizer (optional)
19.Air purifying filter
20.Electrostatic filter
(optional)
SYSTEM DESCRIPTION
2

COOL Cools, dehumidifies and filters the room air. Maintains desired room
temperature.
MODES OF OPERATION, FUNCTIONS
AND FEATURES
SLEEP Designed to create comfortable sleeping conditions. When in COOLING mode,
the temperature rises one degree centigrade after each consecutive hour, for
to three hours, from the start of the mode. The temperature rise prevents the
feeling of over-cooling while sleeping (when your body is at rest). In HEATING
mode the reverse occurs; the air conditioner lowers its temperature one-degree
every hour. When in SLEEP mode, the air conditioner will be automatically turned off
after have operated for seven hours. The result is a more comfortable and
invigorating sleep, which leaves you feeling fresh and energetic on the next
morning.
TIMER Real time control and display, automatically turns the air conditioner ON and
OFF according to the time of day setting, ensuring comfort conditions before
returning home, without wasting electricity. It turns the air conditioner off
automatically when sleeping.
I FEEL Switches the temperature sensing point to the place where the remote
control is located. (For general air conditioner, the temperature sensor is only
located behind the air intake grille). This function is designed to provide a
personalized by transmitting the temperature control command from the location
Remote Control and the unit is done by infra-red signal. Therefore, in using
next to you. The communication between the Remote Control and the unit is done
by infra-red signal. Therefore, in using this function, the Remote Control should
always be aimed , without obstructions at the air conditioner.
HOT KEEP In HEATING and in AUTO FAN, the fan will be turned off when the compressor
is not in operation and will not be restarted, unless the indoor coil reaches
adequate temperature. This HOT KEEP feature prevents uncomfortable cold air
drafts. Use of AUTO FAN is, therefore, recommended when the air conditioner
is in HEATING mode.
AUTO FAN The air conditioner automatically selects the FAN speed in accordance to the
room temperature. At the start, the unit operates at high fan speed. As the room
air approaches to the desired temperature, the fan switches automatically to
a lower speed for quieter operation.
FAN Recirculates and filters the room air. Maintains constant air movement in
the room.
DRY Dehumidifies and softly cools the room In DRY Mode, the air conditioner
operates at an inceased dehumidifying power. This function is recommended
to be used when temperature is rather low but the humidity is high.
AUTO Automatically switches from COOLING to HEATING or from HEATING to
COOLING, maintaining the desired temperature according to the room conditions.
HEATING Heats and filters the room air. Maintains the desired room temperature.
3

4
ROOM
TEMPERATURE Measures and displays room temperature.
BUZZER A soft buzzer will sound from the indoor unit display to indicate that a command
sent by the remote control has been accepted and stored in the unit s memory.
This feature may be easily cancelled by the user from the display panel.
3-MIN
DELAYED RUN
This compressor is protected by a three-minute delayed restart.
MEMORY The microprocessor retains the last data entry whether or not the unit is plugged
in. Therefore, when the unit restarts after a power disruption or failure, it will
resume operating in the same mode as before the power was disrupted.
LOCK Freezes the last operation setting on the remote control. When LOCK is
activated, the remote control will not be able to control the air-conditioner.
AUTO FLAP The air flap (louvers) is automatically positioned for the most suitable blow-out
angle, when COOL, HEAT, DRY or FAN modes are selected. When the air
conditioner is turned off, the flap will close automatically for an aesthetic
appearance.
ON UNIT
OPERATION
The air conditoner can be turned ON for COOLING or HEATING or be turned
OFF directly form the indoor unit display panel without the use of the remote
control.
They are capable of capturing small particles down to 0.1 microns,
Such as atmospheric and house hold dust, coal dust, insecticide dust,
mites, pollen, pet dander, tobacco smoke particles, cooking smoke and
grease, mold fungi, bacteria, viruses and more.
ELECTROSTATIC
FILTER
(optional)
IONIZER
(optional)
Ionizer make the air more fresh and more comfort.
Slide switch (M) to the ON position and use the remote control to activate the
ionizer. The blue light indicator (L) on the unit will light up indicating the ionizer
in operation. To cancel the operation set slide switch to OFF position
Important Notice: When the air-conditioner is turned OFF or if the indoor
fan stops operation the IONIZER stops automatically.
Auto swing and fixed direction is circle and modulators;When press key
once,fan direction board will be automatic,press again and fan direction
board will be fixed.It retains when mode is switchover.
Vertical swing is controlled by 2 step motors A1 &A2.There are 7kinds of
modes:1) A1 &A2 at left together,2) A1 & A2 at left-middle together,3) A1
& A2 at middle together,4) A1 &A2 at right-middle together,5) A1 & A2 at
right together,6) A1 at left and A2 at right,7) A1 & A2 auto swing.
Vertical
swing key
(A1 &A2)
Horizontal
swing key

-+
TEMP
5
PRIOR TO
OPERATION
● Aim at the infrared signal receiver on the room air conditioner when operating.
● The remote control signal can be received at a distance of up to about 8 m.
● Ensure that there are no obstructions between the remote control and the
signal receptor.
● Do not drop or throw the remote control.
● Do not place the remote control in a location exposed to direct sunlight, or
next to a heating unit, and/or other heat source.
● Do not expose the air conditioner signal receiver to a strong light such as
fluorescent lamp or sunlight
REMOTE CONTROL BATTERY CHANGE
● Remove the batteries from the remote control as shown.
● Use two 1.5 volt size AAA batteries
● For protecting the enviroment, please, return used batteries for recycling
process.
REMOTE CONTROL
HOLDER
Use the remote control holder
when unit is not in use.
Remote control can be slipped
in or out its holder.
-+
TEMP
USE OF WIRELESS REMOTE CONTROL
WIRELESS REMOTE CONTROL PUTS ALL
FUNCTIONS AT YOUR FINGURETIPS
been removed.
● Insert the plug of indoor
unit to power supply properly.
● Indicator (A) on air conditioner
lights on, indicating air conditioner
is ready to receive signals from
remote control.
● The red tab protecting the
remote control bateries has
● For clock setting, see page 11.
Prior to operating your air
conditioner, make sure that:

ON-UNIT INDICATORS AND CONTROLS
6
M
K
L
E
JH
A B CD F
G
A. Stand-by/Operation indicator
Lights up in red when
connected to power.
Lights up in blue during
operation.
B. Fresh indicator
Lights up when the E.S.F
or Ionizer operation.
C. LED display
D. Signal receiver
Receiver signals from the
remote control.
E. Timer indicator
Lights up during timer and
sleep operation.
F. Filter indicator
Lights up when air filter requires
cleaning.
G. Cooling indicator
Lights up only when mode
(L) is pressed.
H. Unit mode button
Used to switch the unit for
cooling or heating without the
remote control.
. Heating indicator
Lights up when mode (L) is
pressed.
J. Electrostatic filter safety button
Turn off the Electrostatic filter
when you open the grill.
K. Reset button
Press to turn off the filter
indicator or cancel the buzzer
announcer.
M. Ionizer on/off
Used to switch the ionizer.
L. Ionizer indicator
Lights up during the ionizer is
open.

ON/OFF button
Operation mode selection button
AUTO
COOLING
HEATING
FAN
DRY
I FEEL temperature sensing and
Room temperature display button
FAN SPEED control button
Set point temperature UP and DOWN button
SLEEP button
Vertieal swing button
Horizontal swing button
Ionizer and FRESH AIR button
TIME SET button
TIMER button
Clear button
LCD operation display
RM sensor
Infrared signal display
LOCK Button
Transmission sign
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
7
C
F
AM
PM
AM
PM
AM
PM
ON
OFF
TEMP
MODE
I FEEL/RM
ION/FRESH
SET TIMER
SLEEP
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
CLEAR
REMOTE CONTROL

TURNING ON THE AIR CONDITIONER
Press the START/STOP button (1) to turn on the air conditioner. After connecting to the
power supply, The indicator (A) on the air conditioner light up, indicating that the air
conditioner is in the standby status. Please note that LCD operation display (13) will
always show the last mode of operation and the function used. If you
want to change the co ntr ol set tings, proceed according to the following instructions.
Otherwise, the air conditioner will start and operate in the same mode and functions prior to
being turned off.
VENTILATING OPERATION
Select the ventilating mode by pressing MODE button (2). Switch to the desired
fan speed by pressing FAN speed button (4).
COOLING OPERATION
Select the COOLING mode by pressing MODE button (2). Switch to the desired
FAN SPEED by pressing button (4). Select suitable temperature
setting.
COOLING OPERATION WITH AUTO FAN MODE
This operation starts with the highest air flow in order to quickly lower the room
temperature. It will then automatically switch to the low air flow to quietly maintain
the selected temperature.
HEATING OPERATION
Select the HEATING mode by pressing MODE button (2). Switch to the
desired FAN SPEED or to AUTO FAN by pressing FAN button (4). Select
suitable temperature setting.
previous
OPERATION PROCEDURE
HEATING OPERATION WITH AUTO FAN MODE
This operation starts with the highest air flow in order to quickly raise the room
temperature. It will then automatically switch to a lower air flow to quietly maintain
the selected temperature. HEATING with AUTO FAN will automatically provide
the user with the HOT KEEP function. The fan will be turned off when the indoor
coil temperature is not sufficiently hot to prevent uncomfortable cold air drafts.
HOUR
TEMP
MODE SET TIMER
I FEEL/RM
ION/FRESH
SLEEP CLEAR
I FEEL/RM
ION/FRESH
HOUR
TEMP
MODE SET TIMER
SLEEP CLEAR
I FEEL/RM
ION/FRESH
HOUR
TEMP
MODE SET TIMER
SLEEP CLEAR
I FEEL/RM
ION/FRESH
HOUR
TEMP
MODE SET TIMER
SLEEP CLEAR
I FEEL/RM
ION/FRESH
HOUR
TEMP
MODE SET TIMER
SLEEP CLEAR
I FEEL/RM
ION/FRESH
HOUR
TEMP
MODE SET TIMER
SLEEP CLEAR
8