Aiwa BB-X50 User manual

Quick Start Guide
Item: AI7002-BLK
BB-X50
Portable BoomBox

Portable BoomBox
Type-C Charging Cable Aux Cable
WHAT’SINCLUDED

Controls and ports
1 2 3 4 5 6 7
8 9
1 2 3
1. Power Button
2. Bluetooth Button
3. Previous Track
4. Play/Pause/Call Button
5. Next Track
6. Light Button
7. Ex-Bass Button
8. LCD Screen
9. Volume Knob
1. Type-C Charging Port (for charging the speaker)
2. 3.5mm AUX-IN Jack
3. USB Charging Port (for charging phones/tablets)

CHARGING
Insert one end of the included charging
cable into the charging port on your
speaker.
Insert the other end into the
USB port of a computer or a
suitable USB charging adapter.
Tap to show the battery percentage
on the LCD screen.

Getting Started
The LCD screen shows the volume level.
Charge speaker before starting it up.
To POWER ON press until the power indicator turns white.
To POWER OFF press until all indicators turn off.
To PLAY MUSIC tap .
To PAUSE MUSIC tap again.
To CHANGE TRACKpress to go to the next track
and to go to the previous track.
To ADJUST VOLUME turn the volume knob clockwise to increase volume
or counterclockwise to decrease volume.
Previous Track
Next Track
On/Off
Play/Pause

BLUETOOTHPAIRING
Once the speaker is turned on, it will enter pairing mode.
To pair with device, turn on Bluetooth and find the speaker listed as
Aiwa BB-X50 under the Bluetooth menu in settings. Then press connect.
The Bluetooth indicator
pairing with device.
willlight solid blue after successfully
Speaker reconnects automatically to previously paired device.
To connect a new device, disconnect existing Bluetooth device.
To disconnect bluetooth, press and hold the Bluetooth indicator.
The indicator willflash blue after successfully disconnecting from device.
Aiwa BB-X50

Connect multiple speakers
Turn on the first speaker (Primary Speaker) and pair with
Bluetooth device. Press to enter multi-sync mode.
The Bluetooth indicator on will turn indicating multi-sync mode.
Power on the next speaker (Secondary Speaker) and press .
The indicator willflash to signal connection to the Primary Speaker.
Secondary Speaker
+Repeat Secondary Speaker steps to connect more speakers.
Primary Speaker
To use multi-sync modeturn offall speakers and remove
all devices from Bluetooth connection.

Other Features
To ADJUST LIGHTpress to toggle between 5 light modes
or to turn lights on/off.
To ANSWER/END CALL press to answer.
Press again to end call.
To REJECT CALL press and hold .
Call is transmitted to Primary Speaker during multi-sync mode.
The hands-free call function is available when the speaker is
paired with a smartphone.

SAFETYPRECAUTIONS
When using your speaker, basic safety precautions should always be followed
including:
1. READ ALL INSTRUCTIONS BEFORE USING YOUR SPEAKER.
2. Do not submerge speaker in water.
3. Only clean using a clean, soft cloth.
4. Do not allow children to play with this product. This product contains small
pieces that can be a choking hazard. Parental supervision advised.
5. Do not expose product to excessive heat or fire.
6. Do not expose product to extreme cold or hot temperatures to avoid battery
damage.
7. Do not attempt to repair this product yourself. Contact a qualified service
center if the product is in need of service.
8. Do not drop, crush, or expose this product to excessive physical force.
9. Do not charge while product is in contact with water, as electric shock may
occur.
10. Unplug charging cable when not in use or during thunderstorms.
11. This product is not intended for commercial use.
Maintenanceand Care
-Use a soft cloth or paper towel to clean your speaker Never use any harsh
chemicals or detergents for cleaning. Make sure your speaker is dry before
charging
-When your speaker is not in use, it should be stored in a cool, dry place
-Never tug or yank on a cable while it is connected to your speaker Connect and
disconnect cables as carefully as possible
-Please recycle or dispose of your speaker properly based on the laws and rules
of your municipality Contact local recycling facilities and/or the manufacturer of
your speaker for further information

FCCSTATEMENT
Changes or modifications not expressly approved by the part yresponsible for compliance
could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-- Relocate or reorient the receiving antenna
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
This device complies with FCC radiation exposure limits set forth for an uncontrolled environment.
SPECIFICATIONS
BLUETOOTH VERSION:5.3
WORKING DISTANCE: 30 METERS
MULTI-SYNC RANGE:20 METERS
BATTERY:4000mAh x 3
12000mAh Total Capacity
CHARGING INPUT: DC 5V/2A
OUTPUT POWER: 60W
SOUNDOUTPUT: 120W (peak power)

WARRANTY
This warranty covers the original consumer purchaser only and is not
Transferable.
This warranty covers products that fail to function properly UNDER NORMAL USAGE, due to
defects in material or workmanship. Your product will be repaired or replaced at no charge for
parts or labor for a period of one year.
What Is Not Covered By Warranty
Damages or malfunctions not resulting from defects in material or
workmanship and damages or malfunctions from other than normal use, including but limited
to, repair by unauthorized parties, tampering, modification or accident.
To Obtain Warranty Service and Troubleshooting Information:
Call [phone] or visit our website at www.aiwa.co.
To receive Warranty service along with the name and address of an authorized product service
center, the original consumer purchaser must contact us for problem determination and service
procedures. Proof of purchase in the form of a bill of sale or receipted invoice, evidencing that
the product is within the applicable Warranty period(s), MUST be presented in order to obtain
the requested service. It is your responsibility to properly package and send any defective
products along with a dated copy of proof of purchase, a written explanation of the problem,
and a valid return address of the authorized service center at your expense. Do not include any
other items or accessories with the defective product. Any products received by the authorized
service center that are not covered by warranty will be returned unrepaired.

©2022 Sakar International
195 Carter Drive
Edison, NJ 08817
www.sakar.com
Support: (877)-397-8200
[e-mail]