AJAX FireProtect User manual

FireProtect / FireProtect Plus User Manual
Posted on
July 1, 2021
FireProtect

FireProtect Plus




FireProtect Plus













Jeweller
hub
Ajax uartBridge
Ajax ocBridge Plus
Buy �re detector with carbon monoxide sensor FireProtect Plus







Functional Elements
Operating Principle
Ajax apps
Buy �re detector FireProtect
1.

2.

3.

4.

5.

6.

7.







The life span of the FireProtect Plus detector lasts up to 7 years (up to 10 years for the
). In the event of a detector failure, you will receive a corresponding noti�cation —
it will need to be replaced or submitted for
.
FireProtect Plus








FireProtect
comprehensive diagnostics



1.



2.


3.



Interconnected FireProtect Alarms



KeyPad
KeyPad Plus

Fire Alarm



Connecting the Detector to the Ajax Security System
Connecting to the hub
Before starting connection:
Only users with administrator rights can add the device to the hub
Pairing the detector with hub:
1.



Ajax app
2.


3.


1.

Add Device

2.

QR Code











3.

Add

4.


Connecting to Third Party Security Systems







States
Parameter
State
Temperature
Temperature of the device. Measures on the
device processor and changes gradually
Jeweller Signal Strength
Signal strength between the hub and the detector
Connection
Connection status between the hub and the
device
Battery Charge
Battery level of the device. Two states available:
Ajax
uartBridge
Ajax ocBridge Plus
1.
Devices
2.
FireProtect |
FireProtect Plus
ОК
Battery discharged
How battery charge is displayed in
Ajax apps

Temperature Threshold Exceeded
The state of temperature threshold exceeded
alarm
Rapid Temperature Rise
The state of rapid temperature increase alarm
High CO Level (
FireProtect Plus only
)
The state of dangerous CO level alarm
Backup Battery Charge
Backup battery level of the device
Smoke sensor
The state of the smoke detector
Smoke Sensor Dust Level
The dust level in the smoke chamber
Temporary Deactivation
Shows the status of the device: active, completely
disabled by the user, or only noti�cations about
triggering of the device tamper button are
disabled
Firmware
Detector �rmware version
Device ID
Device identi�er
Settings
Setting
Value
First �eld
Device name, can be edited
Room
Selecting the virtual room to which the device is
assigned
Dangerous CO Level Alarm (
FireProtect Plus only
)
If active, the detector alerts of exceeding the
limits of carbon monoxide concentration
High Temperature Alarm
If active, the detector reacts when the
1.
Devices
2.
FireProtect |
FireProtect Plus
3.
Settings

Alert with a siren if temperature threshold
exceeded
activated in case if temperature threshold
exceeded
Alert with a siren if rapid temperature rise
detected
If active,
added to the system
are
activated in case if rapid temperature rise
detected
Alert with a siren if CO detected (
FireProtect Plus
only
)
If active,
added to the system
are
activated in case if CO concentration is
dangerous
Jeweller Signal Strength Test
Switches the device to the signal strength test
mode
FireProtect Self Test
Starts FireProtect selftest
Temporary Deactivation
Allows the user to disconnect the device without
removing it from the system.
Two options are available:
Note that a disabled device does not trigger an
interconnected alarm of �re detectors. But if
smoke is detected, the built-in siren will sound
User Guide
Opens the detector User Guide
Unpair Device
Deletes device and its settings
sirens
sirens
Entirely
— the device will not execute system
commands or participate in automation
scenarios, and the system will ignore device
alarms and other noti�cations
Lid only
— the system will ignore only
noti�cations about the triggering of the device
tamper button
Learn more about temporary
deactivation of devices

To enable Interconnected Alarms:

Devices




Settings


Service


Fire detectors settings

Interconnected
FireProtect Alarms option
Interconnected alarms are supported by FireProtect and FireProtect Plus detectors with
�rmware versions 3.42 and later. Please note that when you turn on the interconnected
alarms, you cannot set the hub–detector ping interval (Jeweller settings) of more than 48
seconds.

Delay of Interconnected Alarms



When this option is inactive, the interconnected alarm is sent to all �re detectors within a
minute.
The function works as follows:


Delay of Interconnected Alarms






Ajax app
appropriate noti�cations
Ajax sirens
corresponding settings