Akai AR-F360D User manual

Operator's manual (GB) 2~3
Gebruiksaanwijzing (NL) 4~5
Manual de I'utilisateur (F) 6~7
Manuale di istruzioni (I) 8~9
Bedienungsanleitung (D) 10~11
ＣＲ－１７２Ｄ ＩＢ ＡＫＡＩ ００１ ＲＥＶ３．Ｐ６５ 2008-5-30, 11:071

1. Alarm Selector
2. Alarm Mode
3. Radio On
4. Stop : to switch off Alarm, Sleep, Radio
5. Sleep : On / set
6. Snooze : alarm repetition
7. Time : set
8. Alarm : set
9. Setting knobs : Slow Fast
10. Band Selector : FM / AM
11. Dimmer : Low / High
12. Tuning Knob
13. Volume Knob
14. Battery back-up compartment
15. FM wire antenna
16. AC Power cord
17. Digital display
18. Alarm 1 LED indicator
19. Dial scale and pointer
20. Alarm 2 LED indicator
AC power: 230V ~ 50 Hz (CE standard)
DC power: 9V battery type 006P (not provided) for clock back-up system only.
An alkaline type battery is recommended. For optimum performance, this battery should be replaced every 6 months.
1. Insert the AC power cord (16) into a convenient standard AC wall outlet.
2. Connect the 9V battery inside the compartment at the bottom of the unit (14).
BACK-UP SYSTEM: Ensures that the unit will continue to operate as normal during an AC power disruption (in order to preserve the
battery life the display will not light ). All clock settings will be kept in the memory, however, the clock time may require adjustment for
exact accuracy. If this battery is not installed, the display will blink to indicate that you have to redo the time and alarm settings.
LOCATION OF CONTROLS
POWER SUPPLY
1. Follow the procedure in "LISTENING TO THE RADIO", to select your desired radio station.
2. Select the AUTO position (2). The Alarm indicator will alight (18 and / or 20).
3. Switch (1) to either AL 1, AL 2, or AL 1 + 2.
WAKE UP TO THE RADIO
This unit allows you to set two different wake up times which you can choose to use independently or simultaneously. AL 1 or AL 2, or
AL 1 and 2.
AL 1 - Switch (1) to AL 1 position. Press and hold the ALARM (8), and press or (9) to adjust your desired alarm time, then release
ALARM (8) to store your setting in memory.
AL 2 - Switch (1) to AL 2 position and redo the same operation as above.
Select your wake-up mode (2) in AUTO (for RADIO), BUZZER (for alarm sound) or OFF to switch off the alarm.
SETTING THE ALARM AND WAKE-UP MODE
The alarm is programmed to run for 59 min.
1. SNOOZE (6) : Press to stop the alarm temporarily, the alarm will ring again in 7 min.
2. STOP (4) : The alarm will stop, and will sound again 24 hours later.
3. OFF (2) : Turns off alarm permanently, alarm indicator will go off (18 and / or 20).
STOPPING THE ALARM
Select FM or AM (10) then press SLEEP (5), the sound will come on for 59 min. To change this sleep time, press and hold SLEEP (5),
and use or (9) to adjust to the desired time. To turn off the music earlier, press STOP (4).
SLEEP TO MUSIC
LISTENING TO THE RADIO
1. Press and hold TIME (7) and press or (9) to adjust to your desired time.
2. Release TIME (7) to store your setting in memory.
SETTING THE TIME
ATTENTION : To reduce the risk of electric shock, do not remove the cover. There are no user
serviceable parts inside the unit. Refer all servicing to qualified personnel.
The lightening flash with arrowhead symbol within the triangle is a warning sign alerting the user of "dangerous voltage"
inside the unit.
The exclamation point within the triangle is a warning sign alerting the user of important instructions accompanying the
product.
WARNING
- To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.
MORE INFORMATION
IMPORTANT
Digital Dual Alarm Clock Radio
This unit conforms to the international safety specifications , and also complies with current standards concerning electrical safety and
electromagnetic compatibility EMC.
1. Switch to FM or AM position with the Band selector (10).
2. For a better reception in FM, extend the antenna (15). In AM rotate the unit.
3. Press Radio ON (3).
4. Adjust the volume (13) to the desired level.
5. Select your desired radio station (12) and (19).
6. To stop listening to the radio, press STOP (4).
SPECIFICATION
Power consumption 4W
Standby power consumption 2.2W
This symbol on the product or in the instructions means that your electrical and electronic equipment should be disposed at
the end of its life separately from your household waste. There are separate collection systems for recycling in the EU.
For more information, please contact the local authority or your retailer where you purchased the product.
For more information and warranty conditions,
please visit : www.akai.eu
Corrosion, oxidation, battery-leakage and any other gradually acidic defect of this nature will invalidate the guarantee.
GB-2 GB-3
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
- Do not throw batteries in fire !
- The apparatus shall not be exposed to dripping or splashing.
- Ensure a minimum distance of 5 cm around the apparatus for sufficient ventilation.
- Ensure that the ventilation is not impeded by covering the ventilation openings with items, such as newspapers, table-cloths curtains,
etc..
- Do not place naked flame sources, such as lighted candles on the apparatus.
- Take attention to the environmental aspects of battery disposal.
- Use the apparatus only in moderate climates (not in tropical climates).
- Do not place objects filled with liquids, such as vases, on the apparatus.
- The marking plate is located on the bottom enclosure.
- Mains plug is used as the disconnect device and it shall remain readily operable. To be completely disconnected the power input, the
mains plug of the apparatus shall be disconnected from the mains completely. The mains plug should not be obstructed or should be
easily accessed during intended use.
- Battery shall not be exposed to excessive hear such as sunshine, fire or the like.
- Corrosion, oxidation, battery-leakage and any other gradually acidic defect of this nature will invalidate the guarantee.
ＣＲ－１７２Ｄ ＩＢ ＡＫＡＩ ００１ ＲＥＶ３．Ｐ６５ 2008-5-30, 11:072