Akai MPD18 User manual

WWW.AKAIPRO.COM
 QUICKSTART GUIDE
ENGLISH

1
BOX CONTENTS
yMPD18 ySoftware CD
yUSB cable ySafety Instructions & Warranty Information
SOFTWARE CD
PC Users: To install the Akai Professional MPD18 Editor, open the contents of the disc, double-click Setup.exe, and follow
the on-screen instructions. To open the editor, connect the MPD18 to your computer with a standard USB cable (included)
then double-click MPD18 Editor.exe.
Mac Users: Drag the contents of the disc to an appropriate location on your hard drive. To open the editor, connect the
MPD18 to your computer with a standard USB cable (included) then double-click the MPD18 Editor.
Note: Always connect the MPD18 to your computer before opening the editor.
TOP PANEL OVERVIEW
1. USB CONNECTION – Plug a standard
USB cable into this outlet and into the USB
port of your computer. The computer’s
USB port will provide power to the MPD18.
2. 16 REAL MPC PRESSURE AND
VELOCITY SENSITIVE PADS – The pads
can be used to trigger drum hits or other
samples in your software. The pads are
pressure and velocity sensitive, which
makes them very responsive and intuitive
to play.
3. NOTE REPEAT – Holding this button while
striking a pad causes the pad to retrigger at
a rate based on the current Tempo, Time
Division, and Swing settings. Note Repeat
can be synced to an internal or external
MIDI Clock source. It can also function as
a momentary or toggle switch. These
settings are configurable for each Preset
(see NR CONFIG).
4. ASSIGNABLE FADER – This fader can be
used to send continuous control data to a
desktop audio workstation.
5. PAD BANK – This button switches between pad banks A, B, and C. Each bank can address a unique set of 16 sounds,
giving you access of up to 48 different sounds you can trigger with the pads. The currently selected pad bank will be
indicated with a lit LED.
6. PRESETS – This button allows you to select different preset mappings (of the pads and assignable button and fader).
Press and hold it then press the pad with the number of the preset you want (1-16). You can customize these presets in
the software editor (see the SOFTWARE EDITOR section for more information). See the PRESETS section for
descriptions of the available default presets.
7. MIDI CH – This button allows you to change the master MIDI channel the MPD18 sends. Press and hold it then press
the pad with the channel number you want (1-16).
8. FULL LEVEL – When FULL LEVEL is activated, the pads always play back at a maximum velocity (127), no matter how
hard or soft you hit them.
9. NR CONFIG (Note Repeat Configuration) – This button is used to adjust the current Note Repeat parameters.
Note: Changes made with the NR CONFIG button will not be stored in the Preset. For these (and additional)
parameters to be stored in the Preset, edit them in the software editor.
yTime Division: Hold down NR CONFIG and press any one of Pads 1 through 8 to set the desired Time Division
– the rate of Note Repeat. The Time Division value is next to the pad number on the MPD18.
ySwing: Hold down NR CONFIG and press any one of Pads 9 through 15 to set the desired Swing setting for
Note Repeat. The Swing value is next to the pad number on the MPD18. (For finer adjustments to the Swing
value, use the software editor.)
yTempo: If Note Repeat is set to the internal clock (the default), the LED above NR CONFIG will flash at the
current Note Repeat tempo. To enter a new tempo, hold down NR CONFIG and tap Pad 16 ("Tap Tempo") in
time with the desired tempo. (The LED will not flash if Note Repeat is synced to an external clock.)
8 9
1
6 7
5
3
2
4

2
SOFTWARE EDITOR
OPENING THE EDITOR
Always connect the MPD18 to your computer before opening the software editor.
After opening the software editor, you will need to select the MPD18 from the drop-
down menu on the opening screen and click "Done."
yFor Mac or Windows Vista users, it will be listed as Akai MPD18.
yFor Windows XP users, it will be listed as USB Audio Device. (If you have other USB audio devices
connected to your computer, which may have identical names, you may need to try selecting each one
until the MPD18 is recognized.)
LOADING & SAVING PRESETS
The editor lets you edit, save, or load
presets for the MPD18 on your computer.
These buttons and fields are shown at the
top of the editor window.
1. GET PRESET – Click on this field to select the number of a preset currently on the MPD18 (1-16).
When you select it, its settings will be shown on the software interface.
2. EDIT PRESET – Click on this field to select the number that the currently shown preset will use if you
upload it to the MPD18 (by clicking COMMIT – UPLOAD).
3. COMMIT – UPLOAD – Click this button to send the currently shown preset to the MPD18. The number
of this preset is determined by the EDIT PRESET field.
4. SAVE PRESET – Click this button to
save the currently shown preset to
your computer.
5. LOAD PRESET – Click this button to
load a saved preset from your
computer. Once it loads, you will see
its settings in the software interface.
TO COPY A PRESET:
1. Load the preset you want to copy from the MPD18 by clicking GET PRESET field and selecting it.
2. Set the preset you want to copy it to on the MPD18 by clicking EDIT PRESET field and selecting it.
3. Click COMMIT – UPLOAD to send the copied preset to the MPD18.
IMPORTANT!: The firs
t
time you use the software editor, even if the correct device is already shown in
the drop-down menu, you still need to click on the menu and select the device. (You will also need to do
this if you move your files to a new location.) In future sessions, though, you can simply click "Done" if
th
e
co
rr
ec
t
de
vi
ce
i
s
s
h
o
wn in thi
s
win
do
w.
Note: When you save a preset, the current EDIT PRESET
number will be saved with it. When you load that preset
later, the EDIT PRESET field will be updated with that
number. If you want to change the preset number before
uploading it to the MPD18, simply select a new EDIT
PRESET number before clicking COMMIT – UPLOAD.

3
EDITING PRESETS
This section outlines the editable items for each preset.
Items #1-4 are editable for every pad.
1. PAD TYPE – Click this button to select Note or
Prog Change. When Note is selected, pressing
that pad will send the MIDI Note Number you have
selected (see NOTE #). When Prog Change is
selected, pressing that pad will send the Program
Change Number you have selected (see PC #).
2. AFTERTOUCH – Click this button to open a drop-
down menu with three options: No Aftertouch, Ch.
AftrTch, and Poly AftrTch:
yNo Aftertouch: The pad will send no Aftertouch
information.
yCh. AftrTch (Channel Aftertouch):The pad will
send Aftertouch information over the MPD18's
global MIDI channel. If multiple buttons with Channel Aftertouch are pressed simultaneously, their affect is
cumulative.
yPoly AftrTch (Poly Aftertouch):The pad will send Aftertouch information for that pad's assigned MIDI Note
Number only. Poly Aftertouch pads will send Aftertouch information independently from Channel Aftertouch
pads and from other Poly Aftertouch pads. (If multiple Poly Aftertouch pads are sending the same MIDI
Note Number, though, their affect is cumulative.)
3. NOTE # – Click on this field and drag up or down with the mouse (or use your keyboard's or keys) to
change the MIDI Note Number the pad will send. (You will also have to select Note as its PAD TYPE for it to
transmit this note.)
4. PC # – Click on this field and drag up or down with the mouse (or use your keyboard's or keys) to change
the MIDI Program Change number the pad will send. (You will also have to select Prog Change as its PAD
TYPE for it to transmit this message.)
5. NOTE DISPLAY TYPE – Click this button to
display either the MIDI Note Number or the actual
musical note the pad will send.
6. PAD BANK – Click this button to switch through
the three available banks on the MPD18. The
settings for the pads in these other banks will be
shown on the interface.
7. ASSIGNABLE FADER – This fader on the MPD18 can send a Control Change number or Channel Aftertouch.
Click on the first button underneath it to select Control Change or Ch. AfterTouch.
Click on the number next to CC# and drag up or down with the mouse (or use your keyboard's or keys) to
change the Control Change number the button will send.
8. NR CONFIG (Note Repeat Configuration) –
Click this button to open a new window where you
can adjust the Note Repeat parameters for the
current Preset. Click on a field to select a setting
for that parameter:
yBPM (Tempo): Click on this field and drag up
or down with the mouse (or use your
keyboard's or keys) to set the desired
tempo of Note Repeat when the MPD18 is synced to the internal clock. Select a value between 30 and 300
BPM (beats per minute).
yTime Division: Click this button to open a drop-down menu and select the desired Time Division – the rate
of Note Repeat. Select 1/4, 1/8, 1/16, 1/32, 1/4 Triplet, 1/8 Triplet, 1/16 Triplet, or 1/32 Triplet.
yNR Button Behavior: Click this button to select whether the MPD18's NOTE REPEAT button will function
as a "Momentary" or "Toggle" switch
ySwing: Click on this field and drag up or down with the mouse (or use your keyboard's or keys) to set
the desired Swing value for Note Repeat. Select a value from 50 to 75. (At 50, Swing is turned off. The
most "even" Swing feel is at 67.)
yMIDI Clock: Click this button to select "Internal" (the default) to sync it to the internal MIDI clock, then
remember to select a Tempo. Select "External" to sync the Note Repeat function to an external MIDI clock.

4
PRESETS
To select a Preset, press and hold the MPD18's PRESETS button then press the pad with the number of the Preset you want
(1-16). Each Preset comes with a pre-assigned mapping for the 16 pads, as shown below. You can change and save any of
these mappings in the software editor.
PRESET # NAME DESCRIPTION
1 Chromatic The 16 pads are mapped to a chromatic scale from C to D#Eb, ascending a half-step
With each pad number (e.g., Pad 1 = C, Pad 2 = C#/Db, Pad 3 = D, Pad 4 = D#/Eb,
etc.).
2 GM / MPC The 16 pads are mapped to conventional default MPC pad mappings.
3 Prog 1-48 The 16 pads are mapped to transmit Program Change messages 1-48 across all three
pad banks.
4 Prog 49-96 The 16 pads are mapped to transmit Program Change messages 49-96 across all
three pad banks.
5 C Scale The 16 pads are mapped to a C major scale from C to D, ascending a scale degree
with each pad number (e.g., Pad 1 = C, Pad 2 = D, Pad 3 = E, Pad 4 = F, etc.).
6 C# / Db Scale The 16 pads are mapped to a C#/Db major scale from C#/Db to D#/Eb, ascending a
Scale degree with each pad number (e.g., Pad 1 = Db, Pad 2 = Eb, Pad 3 = F,
Pad 4 = Gb, etc.).
7 D Scale The 16 pads are mapped to a D major scale from D to E, ascending a scale degree
with each pad number (e.g., Pad 1 = D, Pad 2 = E, Pad 3 = F#, Pad 4 = G, etc.).
8 D# / Eb Scale The 16 pads are mapped to a D#/Eb major scale from D#/Eb to E#/F, ascending a
Scale degree with each pad number (e.g., Pad 1 = Eb, Pad 2 = F, Pad 3 = G,
Pad 4 = Ab, etc.).
9 E Scale The 16 pads are mapped to an E major scale from E to F#/Gb, ascending a scale
degree with each pad number (e.g., Pad 1 = E, Pad 2 = F#, Pad 3 = G#, Pad 4 = A,
etc.).
10 F Scale The 16 pads are mapped to an F major scale from F to G, ascending a scale
degree with each pad number (e.g., Pad 1 = F, Pad 2 = G, Pad 3 = A, Pad 4 = Bb,
etc.).
11 F# / Gb Scale The 16 pads are mapped to an F#/Gb major scale from F#/Gb to G#/Ab, ascending a
scale degree with each pad number (e.g., Pad 1 = F#, Pad 2 = G#, Pad 3 = A#,
Pad 4 = B, etc.).
12 G Scale The 16 pads are mapped to a G major scale from G to A, ascending a scale degree
with each pad number (e.g., Pad 1 = G, Pad 2 = A, Pad 3 = B, Pad 4 = C, etc.)
13 G# / Ab Scale The 16 pads are mapped to a G#/Ab major scale from G#/Ab to A#/Bb, ascending a
scale degree with each pad number (e.g., Pad 1 = Ab, Pad 2 = Bb, Pad 3 = C,
Pad 4 = Db, etc.)
14 A Scale The 16 pads are mapped to an A major scale from A to B, ascending a scale degree
with each pad number (e.g., Pad 1 = A, Pad 2 = B, Pad 3 = C#, Pad 4 = D, etc.)
15 A# / Bb Scale The 16 pads are mapped to an A#/Bb major scale from A#/Bb to B#/C, ascending a
scale degree with each pad number (e.g., Pad 1 = Bb, Pad 2 = C, Pad 3 = D,
Pad 4 = Eb, etc.)
16 B Scale The 16 pads are mapped to a B major scale from B to C#/Db, ascending a scale
degree with each pad number (e.g., Pad 1 = B, Pad 2 = C#, Pad 3 = D#, Pad 4 = E,
etc.)
SPECIFICATIONS
Number of presets: 16
MIDI output channels over USB: 16
Drum pads: 16 (velocity- and pressure-sensitive)
Drum pad banks: 3
Faders: 1
Switches: 1
Inputs/outputs: 1 USB port
Power: < 100mA, 5V DC via USB
Dimensions (W x D x H): 255mm x 205mm x 42mm
Weight: 0.8 kg

5
MIDI IMPLEMENTATION CHART
Manufacturer: Akai Professional Model: MPD18 Version: 1.0 Date: 2009.04.02
Transmit/Export Recognize/Import Remarks
1. Basic Information
MIDI channels 16 n/a Editor only
Note numbers 000-127 n/a
Program change 000-127 n/a Editor only
Bank Select response? (Yes/No)
If yes, list banks utilized in remarks column No
Modes supported: Mode 1: Omni-On, Poly (Yes/No)
Mode 2: Omni-On, Mono (Yes/No)
Mode 3: Omni-Off, Poly (Yes/No)
Mode 4: Omni-Off, Mono (Yes/No)
Multi Mode (Yes/No)
n/a n/a
Note-On Velocity (Yes/No) Y n/a
Note-Off Velocity (Yes/No) N n/a
Channel Aftertouch (Yes/No) Y n/a
Poly (Key) Aftertouch (Yes/No) Y n/a
Pitch Bend (Yes/No) N n/a
Active Sensing (Yes/No) N n/a
System Reset (Yes/No) N n/a
Tune Request (Yes/No) N n/a
Universal System Exclusive:
Sample Dump Standard (Yes/No)
Device Inquiry (Yes/No)
File Dump (Yes/No)
MIDI Tuning (Yes/No)
Master Volume (Yes/No)
Master Balance (Yes/No)
Notation Information (Yes/No)
Turn GM1 System On (Yes/No)
Turn GM2 System On (Yes/No)
Turn GM System Off (Yes/No)
DLS-1 (Yes/No)
File Reference (Yes/No)
Controller Destination (Yes/No)
Key-based Instrument Ctrl (Yes/No)
Master Fine/Coarse Tune (Yes/No)
Other Universal System Exclusive
Yes Yes Editor only
Manufacturer or Non-Commercial System Exclusive N N
NRPNs (Yes/No) N N
RPN 00 (Pitch Bend Sensitivity) (Yes/No)
RPN 01 (Channel Fine Tune) (Yes/No)
RPN 02 (Channel Coarse Tune) (Yes/No)
RPN 03 (Tuning Program Select) (Yes/No)
RPN 04 (Tuning Bank Select) (Yes/No)
RPN 05 (Modulation Depth Range) (Yes/No)
N N
2. MIDI Timing and Synchronization
MIDI Clock (Yes/No) N N
Song Position Pointer (Yes/No) N N
Song Select (Yes/No) N N
Start (Yes/No)
Continue (Yes/No)
Stop (Yes/No)
N N
MIDI Time Code (Yes/No) N N
MIDI Machine Control (Yes/No) N N
MIDI Show Control (Yes/No)
If yes, MSC Level supported N N
3. Extensions Compatibility
General MIDI compatible? (Level(s)/No)
Is GM default power-up mode? (Level/No) N N
DLS compatible? (Levels(s)/No)
(DLS File Type(s)/No) N N
Standard MIDI Files (Type(s)/No) N N
XMF Files (Type(s)/No) N N
SP-MIDI compatible? (Yes/No) Y Y

WWW.AKAIPRO.COM
7-51-0283-B