Akaso HG10 User manual

1. WHAT’S IN THE BOX
3. CAUTION
• Please read these instructions carefully before using the gloves for the first time.
Keep these instructions carefully and make sure that anyone using these gloves
reads these instructions before use.
• Fully charge the batteries before the first use and any time they haven’t been
used for 2 months or more.
• Charge the battery by connecting both batteries to the supplied charger.
When the red light is lit, charging is ongoing. charging takes about 6 hours,
When charging is complete, the red light turns off, and a green light turns on.
• The heated gloves have three different heating levels. Before using the gloves
for an extended period of time it is recommended to test each level to
determine which setting is the best for your comfort level.
• Do not expose the batteries to high temperatures. The built-in polymer lithium
battery may explode or be damaged if exposed to high temperatures or fire.
• Do not charge unattended, only use the provided original charger.
• Dispose of the batteries properly. Do not dispose the batteries in a fire as the
batteries may explode.
• Do not crush or disassemble.
• All components should be recycled according to local laws and regulations.
• Keep the heated gloves away from children.
2. GLOVE FEATURES
3200mAh
Heated Gloves × 1 Pair Lithium-ion Battery × 2 (3200 mAh)
Dual Battery Charger × 1 User Manual × 1
Cuff Drawstring Closure
Prevent the wind and
cold from getting in
Adjustable Wrist Loops
Securely wrap around any
sized wrist
Locking Clips
Prevent loss
Textured PU Palm
Provides excellent non-slip
gripping surface
Touchscreen Fingertips
Use touch devices without
removing glove
The Power/Function Button
Power on/off,
three heating levels
Battery Pocket
With waterproof zipper
Reflective Strips
For greater
night-time visibility
USER MANUAL
AKASO Heated Gloves HG10
V2.0
USER MANUAL
AKASO Heated Gloves HG10
V2.0

• The gloves should not be used by users unable to feel temperature changes on
the skin.
• Do not use when sleeping.
4. CARE INSTRUCTIONS
• Do not wash
• Do not bleach
• Do not tumble dry
• Do not iron
• Dry clean only
5. INSTRUCTIONS FOR USE
① Charging The Battery Packs
STEP 1: Plug both battery packs into the charger and plug into an AC outlet.
STEP 2: Charge until the red light on the charger turns green. (Charging takes
approximately 6 hours.)
STEP 3: Unplug battery packs from the charger.
STEP 4: Store the charger in a cool, dry place.
Important Note:
• Recharge the batteries after each use to keep them in good condition and to
ensure the gloves are always ready for use.
• Each battery is made up of lithium-ion cells. It can be recharged in any state of
charge. It is not necessary to discharge the batteries completely before
recharging.
Turning OFF:
To switch off the gloves, press and hold the function button for approximately
2 seconds until the heating level indicator light switches off.
6. CONTACT US
For any inquiries about AKASO products, please feel free to contact us.
We will respond within 24 hours.
Tel: [phone] (US)
Email: [email protected]
Web: www.akasotech.com
MEDIUM HEAT
LOW HEAT HIGH HEAT
②Inserting Battery Packs Into Gloves
Step 1: Open the zipper on the battery pocket and pull out the cable.
Step 2: Connect the battery to the cable before inserting them into the pocket.
Step 3: Close the zipper on the battery pocket.
STEP 1 STEP 2 STEP 3
③Basic Features and Operation
Switch ON:
Press and hold down the Power/Function button for approx. 2 seconds to set the
gloves to the highest heating level (Red).
Change Settings:
After the power is on, pressing the Power/Function button once will change the
heating setting to a different level (Low, Medium, High).
• Low heat: Green, Up to 6-8 hours.
• Medium heat: Blue, Up to 4-5 hours.
• High heat: Red, Up to 2-3 hours.
30017000085