Alabazar LY-508B User manual

LY-085 B
Acupuncture pen
Manual
Please read the manual before using
years focus on development
and manufactue of homeuse
medical equipment

1
About the product
1.1 The R&D background of the Meridian
detection and activation device
1.2 Product Function Introduction
After years of efforts, Professor Zhu Zongxiang
officially accounced in Beijing in the golden aut-
umn in 1988: a meridian line is not a simple line
with single structure and function, but multilayer
-polymorphic-multifunctional stereochemical st-
ructure. The research group led by Professor Z-
hu Zongxiang uses scientific principles involved
in fields like acupuncture, meridians and collate-
rals, biophysics, physics etc. to verify the objec-
tive existence of meridian point of traditional C-
hinese medicine-the greatest invention in China.
As found in the experiment, there are 14 regular
meridians in a human body and each meridian li-
ne has 10 characteristics including: 1-3 millimet-
er width, low-resistance, high tremolo. The Mer-
idian detection and activation device is invented
based on the phenomenon of low resistance of
meridians.
1) The device is a high-tech product developed
on the basis of the combination of and modern
bioengineering technology and a significant br-
eakthrough in.
2) The device has a special design, and it detec-
ts the acupuncture points automatically and, w-
hich makes it a portable.
3) The device can penetrate tissue deeply, dred-
ging the meridians and collaterals, promoting b-
lood circulation to remove blood stasis, coordin-
atinginternalorgans, balancing yin and yang.

23
1.3 Main parameter index
1.4 Names of primary structures
1.5 Product features
1.6 Scope of application
1.7 Contraindications
Product Name: Electronic Acupuncture Pen
Frequency: adjustable
Rated voltage: DC 3.7V
Metal
conduction 1
Metal
conduction 2
Frequency
control
Replaceable probe
of finding acupoints
light
Treatment
button
Power and
intensity control
Sensitive
control
Display screen
Conductive stick
interface
Charging Interface
Beauty probe
Replaceable probe CableConductive bar
1) Automatic detection of the acupuncture point-
s; smart, simple and convenient.
2) Instant pulse, stimulating the menstrual flow.
3) It's portable, and is a pocket health care prov-
ider.
4) The acupoint detection sensitivity can be adj-
usted according to the skin type and skin con-
dition.
5) Humanized design, easy to operate.
6) Audio prompt.
7) rechargeable using lithium battery.
8) the sensor is replaceable.
Apply to wrist, elbow, ankle, knee, neck, waist,
face etc.
1) The device can not be used together with tra-
nsplant-type electronic appliances, mechanical
heart or lung etc.
2) The device is contraindicated for pregnant or
menstrual period women, acute patients with de-
rmal abnormalities or high fever.
3) The device should not be used for children or
people with no language expression ability.
4) The device is contraindicated for critically ill
patients or emergency patients.

45
2. 1 Product guidance
1) First, turn on the “on-off/intensity” knob, then
rotate the “sensitivity knob” to “2”, check if it ma-
kes two beeps per second. Adjust the “frequency”
and “intensity” to the level of feeling comfortable.
Depending on skin types and humidity conditions,
the adjustment of “sensitivity” varies from person
to person.
2)
to be mounted on a host, and then insert the co-
nductive wire rod to the host, the other hand hol-
ding the stick to form a loop.
Before using, the treatment probe is needed
On Off
Intensity knob
/
Sensitivity knob
Frequency
knob
3) The correct posture of holding acupuncture p-
en: like holding a pen, thumb touch with the inst-
rument metal conduction film, tiger mouth touch
with metal conduction film, touch with the skin
upright position a little hard.
4) Detect the acupuncture points: when detecti-
ng the acupuncture points, continuous beeping
and quickly increasing numeric value on the dis-
play screen means that the acupuncture points
have been detected, and it's time to press the p-
hysiotherapy key for treatment. Note: During the
process of detecting, don't pressing the physiot-
herapy key.
5) During physiotherapy, the intensity of physio-
therapy can be a proper level of feeling comfort-
ablevia the “on-off/intensity” knob(there are tot-
ally 10 intensity levels for adjustment, from figu-
re 0 to 10).
How to use the product

67
6) After using, switch the “ on-off /intensity“ key
to off state.
7) Change the cosmetic sensor: when having a
facial treatment, rotate 90 CCW the sensor off,
then rotate 90 CW the sensor till it's fastened.
8) When charging, the green light flashes, and
the device powers off. When fully charged, the
green light goes off.
Charging Fully charged
2. 2 Hours of use and course of treatment
2. 3 The do's and don'ts
2. 4 Packing list
Once or twice each day. 3-5 minutes for the same
body part each time.
1) When adjusting the “intensity”, it should be a-
djusted from tillyoufeelcomfortable.
2) The “intensity” should not be set too high. Ch-
eck if the device beeps twice per second. Too
high “intensity” will result in continuous beep-
ing whenchecking, so that meridian points ca-
n't be detected.
3) After using, switch the “ on-off /intensity“ key
to off state.
4) The device can't be used together with high f-
requency surgical equipment, short-wave or
micro-wave equipment.
5) The device should not be used in high-tempe-
rature, abnormal-heat, inflammable, burnable
and electromagnetic radiation places.
Main engine One
One
One
One
One
Physiotherapy probe
USB connector
Manual
current conducting rod+conductor

8
3. 1 Product maintenance tips
3. 2 Guide for failure checking
Product maintenance tips,
guide for failure checking
Device cleaning:
Clean the surface with wet, dripless and soft
towel.
Maintaince of the detection head:
1) When there is dirt on the surface of the sensor,
clean with a soft towel;
2) To avoid cross infection, it is suggested to sc-
rub the detection head with alcohol wipes be-
fore use.
Hegu Neiguan
Zusanli Sanyinjiao
Phenomenon Position Con-
dition Solution
Itmakes a quick
beeping sound
when checking.
Check whether
the “intensity”
is set too high
Yes
Yes
Yes
No
No
Adjust the “sensitivity”
to the level that it ma-
kes two beeps per se-
cond
don't senseth-
ephysiothera-
py
Whether the p-
hysiotherapy
key has been
pressed during
the physical th-
erapy
Keep pressing the p-
hysiotherapy key du-
ring the physical the-
rapy, or the device w-
ill go back to the mo-
de of acupuncture p-
oints detection.
don'tsenseth-
ephysiothera-
pyobviously
Check Check
whether the
“on-off/inten-
sity” knob is a-
djusted to the
suitablelevel
Adjust the “on-off/in-
tensity” knob to a hi-
gher level
Check whether
the bioelectric
frequency is t-
oo low
Increase frequency
Check whether
the battery ca-
pacity is low.
Recharge