Alba Fold 2 User manual

Welcome to the ALBA Family...
As the ALBA Team, we are passionate about providing you the
best-in-class riding experience. ALBA engineers have re-designed
ALBA Fold 2 with meticulous attention to detail.
Our high-end manufacturing ensures a smooth and comfortable
ride and an easy fold & carry capability. Please read this manual
carefully and keep it for future reference.
Do not hesitate to contact our technical helpdesk
on [email protected] or customer[email protected]
with any queries.
Happy Riding,
ALBA Team

ALBA Fold 2 comes ready-to-ride. Just remove the packaging, charge your
battery and start riding.
To start riding ALBA Fold 2, you only need to
- unfold the frame
- adjust the handlebar,
- adjust the seat
- open up the pedals
and you are ready to go.
ALBA Fold 2 has been packaged following extensive safety and quality
control checks. We still recommend that you check that the basic
components are in place before every ride.

Adjust the seat by sliding the bar up/down to your preferred height and
tighten the handle. You can adjust the tightness setting with the nut on the
mechanism.

The numbers on the seat bar indicate the seat
height. When adjusting the seat height, please
do not select a level exceeding the maximum
height. This may damage the frame or cause
the frame to break, resulting in your warranty
becoming void. You can lose control of your
bike and this may lead to serious/fatal injuries.
TOO LOW TOO HIGH

Push-assistance function may only be used when pushing the e-bike.
There may be risk of injury when the wheels of the e-bike do not have
full contact with the ground while using the push-assistance function.
8
5 seconds
2 seconds.
2 seconds again

The Advanced Settings under the Display Settings menu is protected
by a password and is only accessible by our technical team for servic-
ing purposes. Changing the advanced settings from the LCD display
will cause the warranty for all electrical and electronic parts to be
deemed void.
9

Your battery is insulated and therefore resistant to rain. This means you can
easily use your bicycle on rainy days. However, the battery case should be
protected from exposure to excessive or pressurized water.
Electrical energy is clean and environmentally friendly. However the used battery
should be recycled properly at the end of its life. You can contact us for recycling.
Under ideal conditions, your battery can be charged approximately 1000 times.
Over time and with use, its capacity will gradually decrease and you will eventual-
ly need to replace it.
Keep the battery away from direct sunlight, high temperatures and high
humidity.
Do not disassemble the battery. Once disassembled, warranty for
batteries will be void.
Do not connect the (+) and (-)electrodes to each-other
10