Alcatel-Lucent 7302 Installation guide

Alcatel-Lucent 7302
INTELLIGENT SERVICES ACCESS MANAGER
Alcatel-Lucent 7330
INTELLIGENT SERVICES ACCESS MANAGER FIBER TO THE NODE
Alcatel-Lucent 7356
INTELLIGENT SERVICES ACCESS MANAGER FIBER TO THE BUILDING
Alcatel-Lucent Proprietary
This document contains proprietary information of Alcatel-Lucent and is not to be disclosed
or used except in accordance with applicable agreements.
Copyright 2011 © Alcatel-Lucent. All rights reserved.
OPERATIONS AND MAINTENANCE USING CLI FOR FD 24GBPS NT
3HH-10104-AAAA-TQZZA Edition 02 Released
R4.3.02

When printed by Alcatel-Lucent, this document is printed on recycled paper.
Alcatel-Lucent assumes no responsibility for the accuracy of the information presented, which is
subject to change without notice.
Alcatel, Lucent and the Alcatel-Lucent logo are registered trademarks of Alcatel-Lucent. All other
trademarks are the property of their respective owners.
Copyright 2011 Alcatel-Lucent.
All rights reserved.
Disclaimers
Alcatel-Lucent products are intended for commercial uses. Without the appropriate network design
engineering, they must not be sold, licensed or otherwise distributed for use in any hazardous
environments requiring fail-safe performance, such as in the operation of nuclear facilities, aircraft
navigation or communication systems, air traffic control, direct life-support machines, or weapons
systems, in which the failure of products could lead directly to death, personal injury, or severe physical
or environmental damage. The customer hereby agrees that the use, sale, license or other distribution
of the products for any such application without the prior written consent of Alcatel-Lucent, shall be at
the customer's sole risk. The customer hereby agrees to defend and hold Alcatel-Lucent harmless from
any claims for loss, cost, damage, expense or liability that may arise out of or in connection with the
use, sale, license or other distribution of the products in such applications.
This document may contain information regarding the use and installation of non-Alcatel-Lucent
products. Please note that this information is provided as a courtesy to assist you. While Alcatel-Lucent
tries to ensure that this information accurately reflects information provided by the supplier, please refer
to the materials provided with any non-Alcatel-Lucent product and contact the supplier for
confirmation. Alcatel-Lucent assumes no responsibility or liability for incorrect or incomplete
information provided about non-Alcatel-Lucent products.
However, this does not constitute a representation or warranty. The warranties provided for
Alcatel-Lucent products, if any, are set forth in contractual documentation entered into by
Alcatel-Lucent and its customers.
This document was originally written in English. If there is any conflict or inconsistency between the
English version and any other version of a document, the English version shall prevail.

Alcatel-Lucent 7302 | 7330 | 7356 R4.3.02 December 2011 iii
3HH-10104-AAAA-TQZZA Edition 02 Released Operations and Maintenance Using CLI for FD 24 NT
Preface
This preface provides general information about the documentation set for the
7302 Intelligent Services Access Manager (7302 ISAM), the 7330 Intelligent
Services Access Manager Fiber to the Node (7330 ISAM FTTN) and the 7356
Intelligent Services Access Manager Fiber to the Building (7356 ISAM FTTB).
Scope
This documentation set provides information about safety, features and
functionality, ordering, hardware installation and maintenance, CLI and TL1
commands, and software upgrade and migration procedures for the current release.
Audience
This documentation set is intended for planners, administrators, operators, and
maintenance personnel involved in installing, upgrading, or maintaining the 7302
ISAM, the 7330 ISAM FTTN or the 7356 ISAM FTTB.
Required knowledge
Readers must be familiar with general telecommunications principles.
Product naming
When the term “ISAM” is used alone, the 7302 ISAM, the 7330 ISAM FTTN and
the 7356 ISAM FTTB are meant. If a feature is valid for only one of the products,
the applicability will be explicitly stated.

Preface
iv December 2011 Alcatel-Lucent 7302 | 7330 | 7356 R4.3.02
Operations and Maintenance Using CLI for FD 24 NT Edition 02 Released 3HH-10104-AAAA-TQZZA
Documents
Refer to the Product Information document for your product to see a list of all
relevant customer documents and their part numbers.
Acronymns and initialisms
The expansions and optional descriptions of most acronyms and initialisms appear
in the glossary which is included in the System Description for FD 24Gbps NT
document.
Assistance and ordering phone numbers
Alcatel-Lucent provides global technical support through regional call centers.
Phone numbers for the regional call centers are available at the following URL:
http://www.alcatel-lucent.com/myaccess.
For ordering information, contact your Alcatel-Lucent sales representative.
Safety information
For safety information, see the Safety Manual for your product.
Special information
The following are examples of how special information is presented in this
document.
Danger — Danger indicates that the described activity or situation
may result in serious personal injury or death; for example, high
voltage or electric shock hazards.
Warning — Warning indicates that the described activity or situation
may, or will, cause equipment damage or serious performance
problems.
Caution — Caution indicates that the described activity or situation
may, or will, cause service interruption.
Note — A note provides information that is, or may be, of special
interest.

Preface
Alcatel-Lucent 7302 | 7330 | 7356 R4.3.02 December 2011 v
3HH-10104-AAAA-TQZZA Edition 02 Released Operations and Maintenance Using CLI for FD 24 NT
Release notes
Be sure to refer to the release notes (such as the Customer Release Notes or
Emergency Fix Release Note) issued for software loads of your product before you
install or use the product. The release notes provide important information about the
software load.

Preface
vi December 2011 Alcatel-Lucent 7302 | 7330 | 7356 R4.3.02
Operations and Maintenance Using CLI for FD 24 NT Edition 02 Released 3HH-10104-AAAA-TQZZA

Alcatel-Lucent 7302 | 7330 | 7356 R4.3.02 December 2011 vii
3HH-10104-AAAA-TQZZA Edition 02 Released Operations and Maintenance Using CLI for FD 24 NT
Contents
Preface iii
Scope ............................................................................................... iii
Audience ............................................................................................... iii
Required knowledge ...................................................................................iii
Product naming ........................................................................................ iii
Documents .............................................................................................. iv
Acronymns and initialisms ............................................................................ iv
Assistance and ordering phone numbers ........................................................... iv
Safety information ..................................................................................... iv
Special information.................................................................................... iv
Release notes............................................................................................ v
1 — Introduction 1-1
1.1 Introduction .............................................................................. 1-2
1.2 How to use this document ............................................................. 1-2
1.3 Configuration examples ................................................................ 1-5
Index List (IXL)
IXL 100 — Master Task Index List IXL 100-1

Contents
viii December 2011 Alcatel-Lucent 7302 | 7330 | 7356 R4.3.02
Operations and Maintenance Using CLI for FD 24 NT Edition 02 Released 3HH-10104-AAAA-TQZZA
Non-Trouble Procedures (NTP)
NTP 1101 — Execute script files NTP 1101-1
NTP 1114 — Perform equipment repairs NTP 1114-1
NTP 1118 — Monitor performance and view
configuration NTP 1118-1
NTP 1119 — Modify DSL services NTP 1119-1
NTP 1124 — Maintain the system NTP 1124-1
NTP 1126 — Manage system logging NTP 1126-1
NTP 1127 — Configure SHDSL NTP 1127-1
NTP 1130 — Configure Link Related Ethernet OAM NTP 1130-1
NTP 1132 — Configure Connectivity Fault Management NTP 1132-1
NTP 2100 — Initial system configuration NTP 2100-1
NTP 2103 — Configure equipment NTP 2103-1
NTP 2104 — Configure a VLAN cross-connect NTP 2104-1
NTP 2105 — Configure an iBridge VLAN NTP 2105-1
NTP 2106 — Configure an IP-aware bridge NTP 2106-1
NTP 2107 — Configure an IP router NTP 2107-1
NTP 2108 — Configure services NTP 2108-1

Contents
Alcatel-Lucent 7302 | 7330 | 7356 R4.3.02 December 2011 ix
3HH-10104-AAAA-TQZZA Edition 02 Released Operations and Maintenance Using CLI for FD 24 NT
NTP 2115 — Monitor alarms NTP 2115-1
NTP 2116 — Perform software management NTP 2116-1
NTP 2117 — Modify system parameters NTP 2117-1
NTP 2120 — Troubleshooting the network NTP 2120-1
NTP 2121 — Manage an SNMP proxy CPE NTP 2121-1
NTP 2122 — Cluster management NTP 2122-1
NTP 2129 — Configure a loopback interface on the
SHub NTP 2129-1
NTP 2133 — Configure an enhanced IP router NTP 2133-1
Detailed Level Procedures (DLP)
DLP 1100 — Set up a local CLI session or a local TL1
session DLP 1100-1
DLP 1112 — Lock and unlock equipment DLP 1112-1
DLP 1113 — Configure the equipment DLP 1113-1
DLP 1117 — Configure a VLAN on the LT for C-VLAN
cross-connect DLP 1117-1
DLP 1118 — Configure a VLAN on the LT for S-VLAN
cross-connect DLP 1118-1

Contents
x December 2011 Alcatel-Lucent 7302 | 7330 | 7356 R4.3.02
Operations and Maintenance Using CLI for FD 24 NT Edition 02 Released 3HH-10104-AAAA-TQZZA
DLP 1119 — Configure a VLAN on the LT for S+C-VLAN
cross-connect DLP 1119-1
DLP 1120 — Configure a VLAN on the LT for C-iBridge DLP 1120-1
DLP 1124 — Create an xDSL/native Ethernet user and
add this user to a VLAN on the LT DLP 1124-1
DLP 1129 — Create xDSL profiles DLP 1129-1
DLP 1130 — Configure xDSL bonding DLP 1130-1
DLP 1134 — Configure QoS DLP 1134-1
DLP 1145 — Configure 802.1x DLP 1145-1
DLP 1146 — Configure PPPoE relay on LT DLP 1146-1
DLP 1147 — Configure PPPoX cross-connect DLP 1147-1
DLP 1151 — Shut down and restart the NT DLP 1151-1
DLP 1152 — Reboot the system DLP 1152-1
DLP 1153 — Shut down and restart individual
equipment DLP 1153-1
DLP 1159 — Manage OSWP DLP 1159-1
DLP 1163 — Modifying xDSL profiles DLP 1163-1
DLP 1170 — Configure SSH and SFTP DLP 1170-1
DLP 1173 — Switch a user from ADSL to VDSL DLP 1173-1

Contents
Alcatel-Lucent 7302 | 7330 | 7356 R4.3.02 December 2011 xi
3HH-10104-AAAA-TQZZA Edition 02 Released Operations and Maintenance Using CLI for FD 24 NT
DLP 1174 — Create an xDSL IPoA user and add this user
to a VLAN on the LT for C-VLAN
cross-connect DLP 1174-1
DLP 1182 — Configure SHDSL DLP 1182-1
DLP 1183 — Configure IMA on SHDSL spans DLP 1183-1
DLP 1187 — Configure global VLAN parameters on the
LT DLP 1187-1
DLP 1188 — Configure custom PSD points DLP 1188-1
DLP 1189 — Configure VDSL2 virtual noise values DLP 1189-1
DLP 1190 — Configure threshold crossing alerts DLP 1190-1
DLP 1197 — View port configuration and operational
data on LT DLP 1197-1
DLP 1201 — Configure protocol tracing DLP 1201-1
DLP 1202 — Configure QoS threshold crossing alerts DLP 1202-1
DLP 1203 — Configure general security settings DLP 1203-1
DLP 1205 — Configure Link Related Ethernet OAM DLP 1205-1
DLP 1206 — Configure an xDSL DPBO profile DLP 1206-1
DLP 1207 — Modify an xDSL DPBO profile DLP 1207-1
DLP 1208 — Configure xDSL power back off DLP 1208-1
DLP 1212 — Create an IP user/subnet DLP 1212-1

Contents
xii December 2011 Alcatel-Lucent 7302 | 7330 | 7356 R4.3.02
Operations and Maintenance Using CLI for FD 24 NT Edition 02 Released 3HH-10104-AAAA-TQZZA
DLP 1215 — Configure the impulse noise sensor on an
xDSL line DLP 1215-1
DLP 1217 — Configure the xDSL overrule data DLP 1217-1
DLP 1219 — Forced NT switchover DLP 1219-1
DLP 1220 — Manage the CDE profile DLP 1220-1
DLP 1221 — Manage troubleshooting counters on LT DLP 1221-1
DLP 1225 — Configure the p-bit counter on a VLAN
port DLP 1225-1
DLP 1232 — Create an xDSL IPoA user and add this user
to a VLAN on the LT for iBridge DLP 1232-1
DLP 1253 — Configure the third-party equipment
management port on the 7356 FD REM DLP 1253-1
DLP 1255 — Configure a port on the NELT-B LT DLP 1255-1
DLP 1257 — Configure a line with an xDSL RTX profile DLP 1257-1
DLP 1258 — Modify an xDSL RTX profile DLP 1258-1
DLP 1270 — Configure spanning tree on the NELT-B LT DLP 1270-1
DLP 1271 — Configure link aggregation on the NELT-B
LT DLP 1271-1
DLP 1282 — Configure the fairness SLA on the NELT-B
LT DLP 1282-1

Contents
Alcatel-Lucent 7302 | 7330 | 7356 R4.3.02 December 2011 xiii
3HH-10104-AAAA-TQZZA Edition 02 Released Operations and Maintenance Using CLI for FD 24 NT
DLP 1283 — Troubleshooting congestion on the NELT-B
LT DLP 1283-1
DLP 1291 — Configure a Vectoring Control Entity
profile and associate it to a board DLP 1291-1
DLP 1292 — Modify a Vectoring Control Entity profile DLP 1292-1
DLP 1293 — Delete a Vectoring Control Entity profile DLP 1293-1
DLP 1294 — Configure or modify the mapping between
the VP board and the SLV LT boards DLP 1294-1
DLP 1295 — Configure a line with an xDSL vectoring
profile DLP 1295-1
DLP 1296 — Modify an xDSL vectoring profile DLP 1296-1
DLP 1297 — Delete an xDSL vectoring profile DLP 1297-1
DLP 1298 — Monitor xDSL vectoring lines DLP 1298-1
DLP 2101 — Create operator profiles and instances DLP 2101-1
DLP 2103 — Configure system parameters DLP 2103-1
DLP 2105 — Configure link aggregation usage DLP 2105-1
DLP 2107 — Manage OSPF DLP 2107-1
DLP 2108 — Configure RIP DLP 2108-1
DLP 2109 — Configure SNMP and trap management DLP 2109-1
DLP 2110 — Manage alarms DLP 2110-1

Contents
xiv December 2011 Alcatel-Lucent 7302 | 7330 | 7356 R4.3.02
Operations and Maintenance Using CLI for FD 24 NT Edition 02 Released 3HH-10104-AAAA-TQZZA
DLP 2111 — Plan, replan, and unplan equipment DLP 2111-1
DLP 2114 — Configure NT redundancy DLP 2114-1
DLP 2115 — Create a L2-terminated forwarder VLAN DLP 2115-1
DLP 2116 — Create a L2-terminated router VLAN DLP 2116-1
DLP 2121 — Add a network/LAG port to a VLAN in the
SHub DLP 2121-1
DLP 2122 — Create a forwarding VRF DLP 2122-1
DLP 2123 — Create a router VRF DLP 2123-1
DLP 2125 — Create an IPoA user DLP 2125-1
DLP 2126 — Create an IPoE user DLP 2126-1
DLP 2128 — Add an LT port to a VLAN on the SHub DLP 2128-1
DLP 2132 — Configure filtering on the NT DLP 2132-1
DLP 2136 — Configure the multicast service in the
system DLP 2136-1
DLP 2137 — Configure a multicast VLAN DLP 2137-1
DLP 2138 — Configure a multicast channel DLP 2138-1
DLP 2139 — Configure DHCP relay agent in iBridge
mode DLP 2139-1
DLP 2140 — Configure DHCP relay agent in router
mode DLP 2140-1

Contents
Alcatel-Lucent 7302 | 7330 | 7356 R4.3.02 December 2011 xv
3HH-10104-AAAA-TQZZA Edition 02 Released Operations and Maintenance Using CLI for FD 24 NT
DLP 2141 — Configure DHCP relay agent in forwarder
mode DLP 2141-1
DLP 2142 — Configure the system security domain DLP 2142-1
DLP 2144 — Configure RADIUS DLP 2144-1
DLP 2150 — Configure ARP table entry DLP 2150-1
DLP 2154 — Create a snapshot alarm table DLP 2154-1
DLP 2155 — Monitor alarms DLP 2155-1
DLP 2157 — Manage the SHub database DLP 2157-1
DLP 2160 — View version of the SHub software DLP 2160-1
DLP 2162 — Modify the external management VLAN DLP 2162-1
DLP 2164 — Ping another host DLP 2164-1
DLP 2165 — Perform a traceroute action DLP 2165-1
DLP 2166 — Configure SNMP proxy CPE management DLP 2166-1
DLP 2167 — Script files DLP 2167-1
DLP 2168 — Modify the system management IP
parameters DLP 2168-1
DLP 2169 — Configure cluster management DLP 2169-1
DLP 2171 — Enable EMS management DLP 2171-1
DLP 2172 — Create a default operator profile DLP 2172-1

Contents
xvi December 2011 Alcatel-Lucent 7302 | 7330 | 7356 R4.3.02
Operations and Maintenance Using CLI for FD 24 NT Edition 02 Released 3HH-10104-AAAA-TQZZA
DLP 2175 — Configure system management IP
parameters DLP 2175-1
DLP 2176 — Performance monitoring commands DLP 2176-1
DLP 2177 — Configure SFP downlink ports DLP 2177-1
DLP 2179 — Configure system logging DLP 2179-1
DLP 2180 — Configure static MAC addresses DLP 2180-1
DLP 2181 — Configure operator authentication via
RADIUS DLP 2181-1
DLP 2185 — Configure DHCP MAC concentration in
forwarder mode DLP 2185-1
DLP 2186 — Configure ANCP session DLP 2186-1
DLP 2191 — Enable dual tagging in the SHub DLP 2191-1
DLP 2195 — Configure general bridge parameters on
the LT DLP 2195-1
DLP 2196 — Configure Voice SIP DLP 2196-1
DLP 2198 — Configure the multicast service on a user
port DLP 2198-1
DLP 2199 — Configure QoS on the SHub DLP 2199-1
DLP 2200 — Configure Spanning Tree on the SHub DLP 2200-1
DLP 2204 — Configure an unnumbered IP interface on
the SHub DLP 2204-1

Contents
Alcatel-Lucent 7302 | 7330 | 7356 R4.3.02 December 2011 xvii
3HH-10104-AAAA-TQZZA Edition 02 Released Operations and Maintenance Using CLI for FD 24 NT
DLP 2209 — Configure vMAC DLP 2209-1
DLP 2210 — View the status of various system
parameters DLP 2210-1
DLP 2211 — Configure SFP uplink ports DLP 2211-1
DLP 2213 — Enable OAM counters DLP 2213-1
DLP 2214 — Configure connectivity fault management DLP 2214-1
DLP 2216 — Configure Voice MEGACO DLP 2216-1
DLP 2222 — Create the PCCP group DLP 2222-1
DLP 2223 — Configure SHub port mirroring DLP 2223-1
DLP 2224 — Change shelf mode DLP 2224-1
DLP 2230 — Configure a VLAN on the SHub DLP 2230-1
DLP 2231 — Manage the ports on the NT DLP 2231-1
DLP 2236 — Configure the enhanced system clock
synchronization DLP 2236-1
DLP 2273 — External Packet Forwarding DLP 2273-1
Routine Task Procedure (RTP)
RTP 1102 — Retrieve remote inventory RTP 1102-1
RTP 1103 — Retrieve board temperature RTP 1103-1

Contents
xviii December 2011 Alcatel-Lucent 7302 | 7330 | 7356 R4.3.02
Operations and Maintenance Using CLI for FD 24 NT Edition 02 Released 3HH-10104-AAAA-TQZZA
RTP 2100 — Backup the configuration RTP 2100-1
RTP 2101 — Restore the configuration RTP 2101-1
Trouble Analysis Procedure (TAP)
TAP 1100 — Metallic test access TAP 1100-1
TAP 1101 — F5 loopback test TAP 1101-1
TAP 1102 — Equipment repair TAP 1102-1
TAP 1103 — Single ended line testing TAP 1103-1
TAP 1105 — Dual-ended line testing TAP 1105-1
TAP 1106 — ITSC TAP 1106-1
TAP 1107 — MELT TAP 1107-1
TAP 1108 — Integrated NBLT for MEGACO Termination TAP 1108-1
TAP 1109 — Integrated NBLT for SIP Termination TAP 1109-1
TAP 2104 — Fault isolation and troubleshooting TAP 2104-1
Training (TNG)
TNG 1104 — DHCP relay agent configuration TNG 1104-1
TNG 1105 — Overall software packages TNG 1105-1

Contents
Alcatel-Lucent 7302 | 7330 | 7356 R4.3.02 December 2011 xix
3HH-10104-AAAA-TQZZA Edition 02 Released Operations and Maintenance Using CLI for FD 24 NT
TNG 1107 — xDSL parameters TNG 1107-1
TNG 1108 — SHDSL parameters TNG 1108-1
TNG 1115 — Slot numbering schemes TNG 1115-1
TNG 1116 — Link Related Ethernet OAM (EFM OAM) TNG 1116-1
TNG 1119 — vMAC TNG 1119-1
TNG 1120 — VLAN translation TNG 1120-1
TNG 1121 — xDSL bonding TNG 1121-1
TNG 2100 — Service installation TNG 2100-1
TNG 2101 — QoS configuration TNG 2101-1
TNG 2102 — IGMP and multicast configuration TNG 2102-1
TNG 2106 — Specifying 7330 ISAM FTTN expansion
units using the CLI TNG 2106-1
TNG 2109 — Performance management counters TNG 2109-1
TNG 2110 — Configuration examples TNG 2110-1
TNG 2112 — 7330 ISAM FTTN configuration for
subtending TNG 2112-1
TNG 2117 — Enhanced iBridge TNG 2117-1
TNG 2118 — PPPoE with MAC address concentration TNG 2118-1

Contents
xx December 2011 Alcatel-Lucent 7302 | 7330 | 7356 R4.3.02
Operations and Maintenance Using CLI for FD 24 NT Edition 02 Released 3HH-10104-AAAA-TQZZA
Appendix (A)
A. Configuration example values for FD 24Gbps NT A-1
A.1 Purpose ................................................................................... A-2
A.2 Equipment................................................................................ A-2
A.3 xDSL profiles ............................................................................. A-3
A.4 SHub ports................................................................................ A-3
A.5 VLANs ..................................................................................... A-4
A.6 VRFs ....................................................................................... A-5
A.7 Lines....................................................................................... A-6
A.8 IP bridge .................................................................................. A-7
A.9 IP forwarder.............................................................................. A-7
A.10 IP router .................................................................................. A-8
A.11 Enhanced IP router...................................................................... A-8
Index