LOCATE THE ACTIVATION CARD
INSIDE YOUR PACKAGE FIRST
STARTHERE!
ACTIVATEYOURPHONE FIRST
1.Retireelprotector de la pantalla de su teléfono.
2.Instalelabatería, coloque la cubierta posterior y empiece a cargar
suteléfono.
3.
Enciendasuteléfonopresionandola tecla PWR/END hasta que
lapantallaseilumine.Si necesita ayuda, consulte el interior de
estatarjeta.
4.
Unavezcompletadoslospasos del 1 al 3, usted estará listo para
Activarsuteléfono.VisiteTracFone.com o llame al 1-800-867-7183
desdeotroteléfono.
Questions?VisitTracFone.comorcall 1-800-867-7183.
THEFOLLOWINGISYOURSERIAL NUMBER:
®
QUAG-TFA382G.NL
PLEASE RECYCLE
For more information and the
latest Terms and Conditions
of Service, visit TracFone.com
SERVICES
GUIDE
Alcatel A382G
®
START HERE!
ACTIVATE YOUR PHONE FIRST
1. Remove protectors from your phone.
2. Install the battery, put the back cover on and begin charging
your phone.
3. Turn your phone ON by pressing and holding the PWR/END key
until the screen lights up.
4. Once Steps 1 – 3 have been completed, you will be ready to Activate.
Go to TracFone.com or call 1-800-867-7183 from another phone.
Find more details inside this card.
Questions? Visit TracFone.com or call 1-800-867-7183.
®
THE FOLLOWING IS YOUR SERIAL NUMBER:
PREPARE YOUR PHONE FOR ACTIVATION
1. REMOVE SCREEN PROTECTORS FROM YOUR PHONE
Remove all protectors from the screen and other locations
on the phone by peeling them off. You will not be able to
see your phone screen until you remove the screen protector.
3. TURN YOUR PHONE ON
4. ACTIVATE YOUR PHONE
To begin your Activation, go to TracFone.com or call 1-800-867-7183
from another phone. You will need the Serial Number located on
the front of this card to complete your Activation.
To complete the Activation process, turn your phone OFF and
back ON. Then make a call. If your call was not successful, wait
10 minutes, turn your phone OFF and back ON again and make
another call. If after one hour you are still unable to make or receive
calls, please contact our Customer Care Center at 1-800-867-7183
from another phone.
2. INSTALL THE BATTERY AND BACK COVER.
BEGIN CHARGING YOUR PHONE.
A.
Insert the battery so that the metal bars on the battery are
touching the metal pins on the phone. Put the back cover on.
B.
Locate the Charger/USB dock on the bottom edge of the
phone. Insert the charger’s adapter end into the Charger/USB
dock then plug the charger into an electrical outlet.
TIP: You can Activate your phone while charging. To get the most out of
your battery life, charge your phone for 5 hours during initial setup.
To turn your phone ON, press and
hold the PWR/END key, located on
the right hand side of the keyboard,
until the screen lights up.
®
ACARD-TFA382G.NL
TRACFONE BACK COVER CHARGER
BATTERY ACTIVATION CARD SERVICES GUIDE
1.1 WHAT’S IN YOUR PACKAGE 1.2 ABOUT YOUR PREPAID MENU
(once it is active). This is also the menu you will use to
Buy and Add Airtime.
OK key located in
the center of your navigation keys.
PRESS
