ALCHEMIST TS-D-2 User manual

ALCHEMIST
ALCHEMIST
TS-D-2
24/192Khz
Converter
Converter
INSTRUCTION
INSTRUCTION
MANUAL
DAC Type:
Sampling Rates:
Data Types:
0dB Level:
THD+n:
Linearity:
Signal/Noise Ratio:
Frequency Response:
Dynamic Range:
Digital Filter:
Output:
Dimensions:
24 Bit, 192KHz, 64X OVERSAMPLING, 5-LAYER DAC
Supports all sampling rates in range 32kHz - 96kHz
All input data upsampled to 192KHz (Internally)
16, 18, 20 and 24 Bit SPDIF
2V rms >-92dB
+/- 0.3dB to 100dB
>-100dB
DC 21.05KHz
>100dB Delta SIGMA 5-LAYER
2.00V@ 0dB
154 (W) x 45 (H) x 170 (D) (mm)
TS-D-2 SPECIFICATIONS
In the unlikely event that we should discover something that would improve one of our products, we reserve the right to change
specifications without prior notice
All products designed and manufactured in Hertfordshire, UK.
ALCHEMIST, UNIT 1, FURZEWOOD HOUSE, CRANBOURNE INDUSTRIAL ESTATE
CRANBOURNE ROAD, POTTER'S BAR, HERTS, EN6 3JN. United Kingdom.
Tel: [phone], Fax: [phone]
www.alchemist-audio.com, e-mail: [email protected]

The TSD2 24/192KHz Upsampling Converter has been designed to be the perfect
add on DAC to any CD, DVD, DAT or other machines that have a digital output. As
such its slim design allows it to be placed directly on top of most machines that
already have a position in your HiFi rack.
The TSD2 comes with an external PSU which is fitted with the relevant mains plug
type for the country of purchase. In some cases there will be a replaceable fuse in
the plug. If in the event that this should blow replace only with the same type.
Never replace with a different value.
Be sure that your system is switched off whilst connecting / disconnecting any
leads.
SOURCE CONNECTION
As the phono sockets on the TSD2 are gold, we recommend that, where possible,
you use gold phono plugs on your interconnect leads, ensuring the best possible
electrical contact.
There are two digital inputs provided on the TSD2. One is optical and the other is
coaxial. It also provides two forms of output, analogue and coaxial digital output.
RECORDING
The TSD2 is fitted with a digital record output socket. This can be used to reroute
the digital signal from your source out into a machine with recording facilities. i.e.
CDR, MD or DAT
For this output, the TSD2 is selected to incoming sampling rate at standard,
internal selector permitted to output signal to 96KHz. Please contact your dealer
for details.
FRONT PANEL INDICATORS
The front panel of the TSD2 bears two LED s and one button:
Power. This BLUE LED will illuminate when the TSD2 is connected to
its PSU and switched on.
Input Selector. Toggle between Coaxial and Optical input.
Optical. This GREEN LED will illuminate when Optical input is selected.
GENERAL CARE
Cleaning your TSD2 should be done with a clean, dry cloth. Do not use any solvent
or silicone based solutions.
Remember to replace all of your packaging in the box and reseal. Keep the box for
future transportation of your TSD2.
Please note that, as with all hi-fi products, there are no user serviceable parts inside and you should
refer any problems to your dealer. Removal of any chassis part may void you guarantee
POSITIONING
MAINS POWER CONNECTION