ALDI Workzone Titanium AB1900 User manual

User Manual
DEMOLITION BREAKER
AB1900
Contents
MODEL:AB1900 PRODUCT CODE: 61755 08/2018
AFTER SALES SUPPORT
 1300 855 831  [e-mail]
AUS
Original instructions
Vers.No. 180312
ALDI guarantees that our exclusive brand products are developed to
our stringent quality specifi cations. If you are not entirely satisfi ed with this
product, please return it to your nearest ALDI store within 60 days from
the date of purchase for a full refund or replacement, or take advantage of
our after sales support by calling the supplier’s Customer Service Hotline.
Made in China
WORKZONE® TITANIUM is a registered trademark of ALDI Stores
DISTRIBUTED BY:
ALDI STORES
1 SARGENTS ROAD
MINCHINBURY NSW 2770
www.aldi.com.au
5
Overview 04
Contents of box 06
Explanation of symbols 07
Introduction 08
Layout 09
Scope of delivery 09
Intended use 10
Safety regulations 10
Before starting the equipment 15
Operation 15
Technical data 16
Maintenance 18
Electrical connection 19
Disposal and recycling 20
Troubleshooting 20
Warranty Details 21
Repair and Refurbished Goods or Parts Notice 22

AFTER SALES SUPPORT 7
 1300 855 831  [e-mail]
MODEL: AB1900 PRODUCT CODE: 61755 08/2018
AUS
AB1900 Explanation of Symbols
m Attention! These operating instructions provide places concerning
your safety which are marked with this indication.
m Caution! Failure to follow these instructions may cause light to
medium risk of injury.
m Warning! Failure to follow these instructions may cause danger to
life or danger of serious injuries!
Explanation of Symbols
Caution - Read the operating instructions to reduce the risk of
inquiry.
Wear safety goggles!
Wear ear-muffs!
Wear a breathing mask!
Wear working gloves!
60 The product is guaranteed to be free from defects in workmanship
and parts for a period of 60 months from the date of purchase.
Appliance Class II

8AFTER SALES SUPPORT
 [e-mail]  1300 855 831
MODEL: AB1900 PRODUCT CODE: 61755 08/2018
AUS
Introduction AB1900
I. INTRODUCTION
Congratulations on choosing to buy a WORKZONE®TITANIUM product.
All products brought to you by WORKZONE®TITANIUM are manufactured to the
highest standards of performance and safety, and as part of our philosophy of cus-
tomer service and satisfaction, are backed by our comprehensive 5 Year Warranty.
We hope you will enjoy using your purchase for many years to come.
Note:
The manufacturer of this device is not liable for damages which arise on or in con-
nection with this device in case of:
• improper handling,
• non-compliance with the instructions for use,
• repairs conducted by third party or non-authorised skilled workers,
• installation and replacement of non-original spare parts,
• improper use,
• failures of the electrical system due to the non-compliance with the electrical
specications and regulations.
Recommendations:
Read the entire text of the operating instructions prior to the assembly and operation
of the device.
These operating instructions are intended to make it easier for you to get familiar
with your device and utilise its intended possibilities of use.
The operating instructions contain important notes on how to work safely, properly
and economically with your machine and how to avoid dangers, save repair costs,
reduce downtime, and increase the reliability and working life of the machine.
In addition to the safety regulations contained herein, you must in any case comply
with the applicable regulations of your country with respect to the operation of the
machine.
Put the operating instructions in a clear plastic folder to protect them from dirt and
humidity, and store them near the machine. The instructions must be read and
carefully observed by each operator prior to starting the work. Only persons who
have been trained in the use of the machine and have been informed on the related
dangers and risks are allowed to use the machine. The required minimum age must
be met.
In addition to the safety notes contained in the present operating instructions and
the special regulations of your country, the generally recognised technical rules for
the operation of identically constructed machines must be observed.

AFTER SALES SUPPORT 9
 1300 855 831  [e-mail]
MODEL: AB1900 PRODUCT CODE: 61755 08/2018
II. LAYOUT (Fig. 1)
1. Handle
2. Control switch
3. Auxiliary handle
4. Locking bolt
5. Chuck
6. Inspection window/ Oil ller opening
7. Flat chisel
8. Pointed chisel
9. Oil can
III. SCOPE OF DELIVERY
(1x) Demolition breaker
(1x) Flat chisel
(1x) Pointed chisel
(1x) Auxiliary Handle
(1x) Oil can
(1x) Storage case
(1x) Instruction manual
(1x) Warranty card
• Open the packaging and remove the device carefully.
• Remove the packaging material as well as the packaging and transport bracing
(if available).
• Check that the delivery is complete.
• Check the device and accessory parts for transport damage.
• If possible, store the packaging until the warranty period has expired.
m Attention!
The device and packaging materials are not toys!
Children must not be allowed to play with plastic bags, lm and small parts!
There is a risk of swallowing and suffocation!
AUS
AB1900 Layout/Scope of Delivery

10 AFTER SALES SUPPORT
 [e-mail]  1300 855 831
MODEL: AB1900 PRODUCT CODE: 61755 08/2018
AUS
Intended use/Safety Regulations AB1900
IV. INTENDED USE
This machine is designed for heavy duty demolition and chiseling work using the
appropriate chisel.
The machine is to be used only for its prescribed purpose. Any other use is
deemed to be a case of misuse. The user / operator and not the manufacturer will
be liable for any damage or injuries of any kind caused as a result of this.
Please note that our equipment has not been designed for use in commercial, trade
or industrial applications. Our warranty will be voided if the machine is used in com-
mercial, trade or industrial businesses or for equivalent purposes.
V. SAFETY REGULATIONS
m WARNING Read all safety warnings and all instructions. Failure to follow
the warnings and instructions may result in electric shock, re and/or serious in-
jury. Save all warnings and instructions for future reference The term "power
tool" in the warnings refers to your mains-operated (corded) power tool or bat-
tery-operated (cordless) power tool.
1. WORK AREA SAFETY
a. Keep work area clean and well lit. Cluttered or dark areas invite accidents.
b. Do not operate power tools in explosive atmospheres, such as in the pres-
ence of ammable liquids, gases or dust. Power tools create sparks which
may ignite the dust or fumes.
c. Keep children and bystanders away while operating a power tool. Distrac-
tions can cause you to lose control.
2. ELECTRICAL SAFETY
a. Power tool plugs must match the outlet. Never modify the plug in any way.
Do not use any adapter plugs with earthed (grounded) power tools. Unmodied
plugs and matching outlets will reduce risk of electric shock.
b. Avoid body contact with earthed or grounded surfaces such as pipes, radi-
ators, ranges and refrigerators. There is an increased risk of electric shock if
your body is earthed or grounded.
c. Do not expose power tools to rain or wet conditions. Water entering a power
tool will increase the risk of electric shock.
d. Do not abuse the cord. Never use the cord for carrying, pulling or unplug-
ging the power tool. Keep cord away from heat, oil, sharp edges or moving

AFTER SALES SUPPORT 11
 1300 855 831  [e-mail]
MODEL: AB1900 PRODUCT CODE: 61755 08/2018
AUS
AB1900 Safety Regulations
parts. Damaged or entangled cords increase the risk of electric shock.
e. When operating a power tool outdoors, use an extension cord suitable for
outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric
shock.
f. If operating a power tool in a damp location is unavoidable, use a residual
current device (RCD) protected supply. Use of an RCD reduces the risk of
electric shock.
3. PERSONAL SAFETY
a. Stay alert, watch what you are doing and use common sense when operat-
ing a power tool. Do not use a power tool while you are tired or under the
inuence of drugs, alcohol or medication. A moment of inattention while oper-
ating power tools may result in serious personal injury.
b. Use personal protective equipment. Always wear eye protection. Protective
equipment such as a dust mask, non-skid safety shoes, hard hat, or hearing pro-
tection used for appropriate conditions will reduce personal injuries.
c. Prevent unintentional starting. Ensure the switch is in the off-position be-
fore connecting to power source and/or battery pack, picking up or carrying
the tool. Carrying power tools with your nger on the switch or energising power
tools that have the switch on invites accidents.
d. Remove any adjusting key or wrench before turning the power tool on. A
wrench or a key left attached to rotating part of the power tool may result in per-
sonal injury.
e. Do not overreach. Keep proper footing and balance at all times. This enables
better control of the power tool in unexpected situations.
f. Dress properly. Do not wear loose clothing or jewellery. Keep your hair,
clothing and gloves away from moving parts. Loose clothes, jewellery or long
hair can be caught in moving parts.
g. If devices are provided for the connection of dust extraction and collection
facilities, ensure these are connected and properly used. Use of dust collec-
tion can reduce dust-related hazards.
4. POWER TOOL USE AND CARE
a. Do not force the power tool. Use the correct power tool for your application.
The correct power tool will do the job better and safer at the rate for which it was
designed.
b. Do not use the power tool if the switch does not turn it on and off. Any power
tool that cannot be controlled with the switch is dangerous and must be repaired.

12 AFTER SALES SUPPORT
 [e-mail]  1300 855 831
MODEL: AB1900 PRODUCT CODE: 61755 08/2018
AUS
Safety regulations AB1900
c. Disconnect the plug from the power source and/or the battery pack from
the power tool before making any adjustments, changing accessories, or
storing power tools. Such preventive safety measures reduce the risk of start-
ing the power tool accidentally.
d. Store idle power tools out of the reach of children and do not allow persons
unfamiliar with the power tool or these instructions to operate the power
tool. Power tools are dangerous in the hands of untrained users.
e. Maintain power tools. Check for misalignment or binding of moving parts,
breakage of parts and any other condition that may affect the power tools
operation. If damaged, have the power tool repaired before use. Many acci-
dents are caused by poorly maintained power tools.
f. Keep cutting tools sharp and clean. Properly maintained cutting tools with
sharp cutting edges are less likely to bind and are easier to control.
g. Use the power tool, accessories and tool bits etc. in accordance with these
instructions, taking into account the working conditions and the work to be
performed. Use of the power tool for operations different from those intended
could result in a hazardous situation.
5. SERVICE
a. Have your power tool serviced by a qualied repair person using only iden-
tical replacement parts. This will ensure that the safety of the power tool is
maintained.
6. RECOMMENDATION
We recommend that the tool always be supplied via residual current device with
a rated residual current of 30 mA or less.
ADDITIONAL SAFETY INSTRUCTIONS
• Wear ear protectors. Exposure to noise can cause hearing loss.
• Use the Auxiliary handles supplied with the tool. Losing control of the tool can
cause injuries.
• Hold the equipment by the insulated handles when carrying out work during
which the plug-in tool could strike concealed power cables or its own mains
lead. Contact with a live cable can also make the metal parts of the equipment live
and will cause an electric shock.
Important!
When using equipment, a few safety precautions must be observed to avoid injuries
and damage. Please read the complete operating manual with due care. Keep this

AFTER SALES SUPPORT 13
 1300 855 831  [e-mail]
MODEL: AB1900 PRODUCT CODE: 61755 08/2018
AUS
AB1900 Safety regulations
manual in a safe place, so that the information is available at all times. If you give
the equipment to any other person, give them these operating instructions as well.
We accept no liability for damage or accidents which arise due to non-observance of
these instructions and the safety information.
WORKING HINTS
• All protective and safety devices must be mounted on the machine before
beginning work.
• The machine is designed to be operated by one person. The operator is
responsible for all other persons in the working area.
• Observe all safety instructions and warnings attached to the machine.
• See to it that safety instructions and warnings attached to the machine are always
complete and perfectly legible.
• The safety, work and maintenance instructions of the manufacturer as well as the
technical data given in the calibrations and dimensions must be adhered to.
• Relevant accident prevention regulations and other, generally recognized
safety-technical rules must also be adhered to. The machine may only be used,
maintained, and operated by persons familiar with it and instructed in its operation
and procedures. Arbitrary alterations to the machine release the manufacturer
from all responsibility for any resulting damages. The machine may only be used
with original accessories and original tools made by the manufacturer.
• Any other use exceeds authorization. The manufacturer is not responsible for any
damages resulting from unauthorized use; risk is the sole responsibility of the
operator.
• Caution: The use of other tools or accessories than the ones specied in the
operating instructions may present a risk of injury for you.
Residual risks
The machine has been built according to the state of the art and the
recognised technical safety requirements. However, individual residual
risks can arise during operation.
Mechanical hazards related to:
Machine parts or workpieces:
• shape;
• relative location;
• mass and velocity (kinetic energy of elements in controlled or uncontrolled
motion);
• mechanical strength;
• Crushing hazard;
• Cutting or severing hazard;
• Entanglement hazard;
• Drawing-in or trapping hazard;

14 AFTER SALES SUPPORT
 [e-mail]  1300 855 831
MODEL: AB1900 PRODUCT CODE: 61755 08/2018
AUS
Safety regulations AB1900
Electrical hazards due to:
• Contact of persons with live parts (direct contact)
• Contact of persons with parts which have become live under faulty conditions
(indirect contact)
• Electrostatic phenomena
Hazards generated by noise, resulting in:
• Hearing loss (deafness), other physiological disorders (loss of balance, loss of
awareness)
• Interference with speech communication, acoustic signals
Hazards generated by materials and substances (and their constituent elements)
processed or used by the machinery
• Hazards from contact with or inhalation of harmful uids and dusts
• Fire hazard
Hazards generated by neglecting ergonomic principles in machinery design
related to:
• Unhealthy postures or excessive effort
• Hand-arm or foot-leg anatomy
• Local lighting
• Mental overload and underload, stress
• Human error, human behaviour
• Design, location or identication of manual controls
Combination of hazards
Unexpected start up, unexpected overrun / overspeed (or any similar
malfunction) from:
• Failure/disorder of the control system
• External inuences on electrical equipment
• Errors made by the operator (due to mismatch of machinery with human
characteristics and abilities)
• Impossibility of stopping the machine in the best possible conditions
• Variations in the rotational speed of tools
• Failure of the power supply
• Failure of the control circuit
• Errors of tting
• Break-up during operation
• Falling or ejected objects or uids
• Loss of stability / overturning of machinery

AFTER SALES SUPPORT 15
 1300 855 831  [e-mail]
MODEL: AB1900 PRODUCT CODE: 61755 08/2018
AUS
AB1900 Before starting equipment/Operation
VI. BEFORE STARTING THE EQUIPMENT
Before you connect the equipment to the mains supply make sure that the data on
the rating plate are identical to the mains data.
Always pull the power plug before making adjustments to the equipment.
Check the oil level before using the machine. Place the machine on the oor with
the tool mounting pointing downwards. The oil must be at least above at the middle
of the inspection window (6). (Fig. 1)
Check the drilling point for concealed electrical cables, gas and water pipes using a
cable/pipe detector.
Inserting the accessory (Fig. 1/3)
• Clean the accessory before tting it and apply a thin coating of grease (not
included) to the accessory shaft.
• Pull out the locking bolt (4) as far as possible, turn it through 180° and release it.
• Insert the accessory into the chuck (5) and push it in as far as possible.
• Pull out the locking bolt (4) again, turn it through 180° in the opposite direction
and release it.
• Check the lock by pulling the accessory.
Removing the accessory
To remove the accessory, proceed in reverse order.
VII. OPER ATION
This demolition breaker is designed for use in the breaking of hard surfaces - con-
crete and masonry and for the loosening of impacted dirt and soil. Its powerful motor
and attachments ensure the quick and easy removal of material.
The pointed chisel is used mainly for general chiseling and the demolition of mason-
ry, concrete and loose rock. It is particularly well suited to breaking and loosening.
The at chisel is used for general chiseling, demolition and the breaking of masonry,
concrete and loose stone. With its selective breaking action the at chisel is used for
the removal of protruding concrete and masonry or for the removal residual mortar.
m Important!
To avoid the risk of electric shock, the machine must only be held using the handle
(1) and the auxiliary handle (3). You may suffer an electric shock if you chisel into
electrical cables or power supplies.

16 AFTER SALES SUPPORT
 [e-mail]  1300 855 831
MODEL: AB1900 PRODUCT CODE: 61755 08/2018
AUS
Operation/Technical data AB1900
Switching on and off (Fig. 4)
To switch on:
Press the control switch (2).
To switch off:
Release the control switch (2).
Automatic mode
To switch on:
Press the control switch (2) and then the knob (B).
To switch off:
Press the control switch (2) and then release it.
Practical tips
Sharpening chisel accessories
You will only achieve good results if you use sharp chisels. You should therefore
sharpen the chisels promptly to ensure that they produce good results and provide a
long service life. Sharpen the chisels with an angle grinder.
mImportant!
You only require slight contact pressure for chiseling. Excessive contact pressure
will place an unnecessary strain on the motor. Check the chisels at regular intervals.
Sharpen or replace blunt chisels.
VIII. TECHNICAL DATA
Dimensions L x W x H mm 674 x 155 x 264
Input Voltage V~ 230 - 240
Frequency Hz 50
Power input W 1900
Impact Energy Joules 60
Impact Rating bpm 2000
Weight (machine + chisel) kg 15.1
Protection class II
Subject to technical modications!

AFTER SALES SUPPORT 17
 1300 855 831  [e-mail]
MODEL: AB1900 PRODUCT CODE: 61755 08/2018
AUS
AB1900 Technical data
Noise
Total values determined in accordance with EN 60745.
Sound pressure level LpA 80.63 dB(A)
Uncertainty KpA 2.49 dB
Sound power level LWA 100.6 dB(A)
Sound power level (guaranteed) LWA 103 dB(A
Uncertainty KWA 2.49 dB
Wear ear / hearing protection
The impact of noise can cause damage to hearing. Total vibration values (vector
sum of three directions) determined in accordance with EN 60745.
Total vibration values (vector sum of three directions) determined in accordance
with EN 60745.
Chiseling
Vibration emission value ah (main handle): 17.447 m/s²
Vibration emission value ah(auxialiary handle): 19.546 m/s²
K uncertainty = 1.5 m/s²
mImportant!
The vibration value changes according to the area of application of the
electric tool and may exceed the specied value in exceptional circum-
stances.
Reduce noise generation and vibration to a minimum!
Use only equipment that is in perfect condition.
Maintain and clean the equipment regularly.
Adopt your way of working to the equipment.
Do not overload the equipment.
Have the equipment checked if necessary.
Switch off the equipment when not in use.
Wear protective gloves.
The gures quoted are emission levels and are not necessarily safe working levels.
Whilst there is a correlation between the emission and exposure levels, this
cannot be used reliably to determine whether or not further precautions are required.
Factors that inuence the actual level of exposure of the workforce include the
characteristics of the work room and the other sources of noise etc. i.e. the number
of machines and other adjacent processes. Also the permissible exposure level can
vary from country to country. This information, however, will enable the user of the
machine to make a better evaluation of the hazard and risk.

18 AFTER SALES SUPPORT
 [e-mail]  1300 855 831
MODEL: AB1900 PRODUCT CODE: 61755 08/2018
AUS
Maintenance AB1900
IX. MAINTENANCE
m Warning! Always pull out the mains power plug before starting any cleaning
work.
m Warning! If the supply cord of this power tool is damaged, it must be replaced by
a specially prepared cord available through the service organization.
Cleaning
Disconnect the mains plug, and wait until the rotating tool stands still. All protection
and safety devices must be immediately re-installed once the repair and
maintenance work is completed. The built-in ball bearings are maintenance-free.
Recommendations:
• Keep all safety devices, air vents and the motor housing free of dirt and dust
as far as possible. Wipe the equipment with a clean cloth or blow it with com-
pressed air at low pressure.
• We recommend that you clean the device immediately each time you have n-
ished using it.
• Clean the equipment regularly with a moist cloth and some soft soap. Do not
use cleaning agents or solvents; these could attack the plastic parts of the
equipment. Ensure that no water can seep into the device.
Carbon brushes
In case of excessive sparking, have the carbon brushes checked only by a qualied
electrician. Important! The carbon brushes should not be replaced by anyone but
a qualied electrician.
Check the oil level (Fig. 1)
Check the oil level before using the machine. Place the machine on the oor with
the tool mounting pointing downwards. The oil must be at least above at the middle
of the inspection window (6). Changing the oil: The oil should be changed after
around 40-50 hours of use. Recommended oil: 25ml SAE 15W/40 or an alternative
of the same quality.
Oil change (Fig. 1)
Switch off the machine and pull the mains plug out of the socket.
Remove the inspection window (6) with a screwdriver (not included) and drain the
oil. To prevent the oil from running out in an uncontrolled manner, hold a small metal
chute under the opening and collect the oil in a vessel until it has fully drained out of
the machine.
Important: The waste oil must be disposed of in the appropriate collection point

AFTER SALES SUPPORT 19
 1300 855 831  [e-mail]
MODEL: AB1900 PRODUCT CODE: 61755 08/2018
AUS
AB1900 Electrical connection
for waste oil. Add new oil (approx. 80 ml) through the oil ller opening (6) until the
oil level reaches the required level. Re-check the oil level after a short period of
operation.
X. ELECTRICAL CONNECTION
The electrical motor installed is connected and ready for operation. The
connection complies with the applicable Australian standards.
The customer´s mains connection as well as the extension cable used must
also comply with these regulations.
Damaged electrical connection cable
The insulation on electrical connection cables is often damaged.
This may have the following causes:
• Passage points, where connection cables are passed through windows or
doors.
• Kinks where the connection cable has been improperly fastened or routed.
• Places where the connection cables have been cut due to being driven over.
• Insulation damage due to being ripped out of the wall outlet.
• Cracks due to the insulation ageing.
Such damaged electrical connection cables must not be used and are life-threat-
ening due to the insulation damage. Check the electrical connection cables for
damage regularly. Make sure that the power is switched off before inspecting the
cable. Electrical connection cables must comply with the applicable Australian
standards and must be correctly marked. Only use connection cables with the
marking ''H07RN-F''.Replacement cables can only be tted by an approved and
certied electrician. If you are in any doubt please contact the help line at the foot
of this page.
AC motor
• The mains voltage must be 230 - 240 V~.
• Extension cables up to 25 m long must have a cross-section of 1.5 mm2.
• The mains connection must be protected with a delay action fuse of 16 A.
Connections and repairs of electrical equipment may only be carried out by an
electrician.
Please provide the following information in the event of any enquiries:
• Type of current for the motor
• Machine data - type plate

20 AFTER SALES SUPPORT
 [e-mail]  1300 855 831
MODEL: AB1900 PRODUCT CODE: 61755 08/2018
AUS
Disposal and Recycling/Troubleshooting AB1900
XI. DISPOSAL AND RECYCLING
The equipment is supplied in packaging to prevent it from being damaged in
transit. The raw materials in this packaging can be reused or recycled. The
equipment and its accessories are made of various types of material, such as
metal and plastic. Defective components must be disposed of as special waste.
Ask your dealer or your local council.
XII. TROUBLESHOOTING
Problem Possible Cause Help
Motor does not
start.
Failure of mains fuse. Check the mains fuse.
Extension cable defective. Replace defective extension cable .
Connections at the motor or
switch out of order.
Check with the help of an electrician.
Motor or switch defective. Check with the help of an electrician.
Motor does not
work, the fuse
responds.
Cross section of the exten-
sion cable insufciently.
Refer to Electrical Connection.
Overload Check tool.

5
DEMOLITION BREAKER
Warranty Details
The product is guaranteed to be free from defects in workmanship and parts for a period
of 60 months from the date of purchase. Defects that occur within this warranty period,
under normal use and care, will be repaired, replaced or refunded at our discretion.
The benets conferred by this warranty are in addition to all rights and remedies in respect of
the product that the consumer has under the Competition and Consumer Act 2010 and similar
state and territory laws.
Our goods come with guarantees that cannot be excluded under the Australian Consumer
Law. You are entitled to a replacement or refund for a major failure and for compensation
for any other reasonably foreseeable loss or damage. You are also entitled to have the goods
repaired or replaced if the goods fail to be of acceptable quality and the failure
does not amount to a major failure.
AFTER SALES SUPPORT
 1300 855 831  [e-mail]
AUS Hotline Costs MODEL: AB1900 PRODUCT CODE: 61755 08/2018
5
REGISTER YOUR PURCHASE AT www.aldi.com.au/en/about-aldi/product-registration/ TO KEEP UP-TO-DATE WITH IMPORTANT PRODUCT INFORMATION

DEMOLITION BREAKER
Repair and Refurbished Goods
or Parts Notice
Unfortunately, from time to time, faulty products are manufactured which need to be returned
to the Supplier for repair.
Please be aware that if your product is capable of retaining user-generated data (such as les
stored on a computer hard drive, telephone numbers stored on a mobile telephone, songs
stored on a portable media player, games saved on a games console or les stored on a USB
memory stick) during the process of repair, some or all of your stored data may be lost.
We recommend you save this data elsewhere prior to sending the product for repair.
You should also be aware that rather than repairing goods, we may replace them with
refurbished goods of the same type or use refurbished parts in the repair process.
Please be assured though, refurbished parts or replacements are only used where they
meet ALDI’s stringent quality specications.
If at any time you feel your repair is being handled unsatisfactorily, you may escalate your
complaint. Please telephone us on 1300 855 831 or write to us at:
RossMac Pty. Ltd.
P.O. Box 261, Essendon North, Victoria, 3041
1300 855 831
[e-mail]
AFTER SALES SUPPORT
 1300 855 831  [e-mail]
MODEL:AB1900 PRODUCT CODE: 61755 08/2018
5

Overview
45Pack contents/parts
Contents of Box
11 x Demolition Breaker
1 x Flat chisel
1 x Pointed chisel
1 x Oil can
1 x Storage case
1 x Instruction manual
3
4
5
6
7
AUS
AB1900
AFTER SALES SUPPORT
 [e-mail]  1300 855 831
MODEL:AB1900 PRODUCT CODE: 61755 08/2018
6
1 x Warranty card8
1
2
1
3
4
5
6
7
8
9
2
3
A
180°
3
4
5
4
2
B
1 x Auxiliary handle
2